Question for lowered guys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 07-17-2008, 04:29 PM

I got a new Spectre Racing differential cover in from Jeg's today (12 bolt). With the truck lowered the cover is too deep (wants to be where the panard bar is). Does anyone know a high quality cover (billet, cast aluminum, etc.) for the GM 12 bolt that's not as deep (needs to be within one inch of stock depth)?

BTW: look for a beautiful cover in the FS section

fatboys69 · 07-17-2008, 06:30 PM

John,
does it have the tracbar relocated to the bottom of the control arm?? Don't know if it will make a difference but it might. Seems I remember seeing something about this issue in a previous thread.

aka FATBOYS69
DeWayne

jb4short · 07-17-2008, 06:35 PM

Quote:

Originally Posted by fatboys69

John,
does it have the tracbar relocated to the bottom of the control arm?? Don't know if it will make a difference but it might. Seems I remember seeing something about this issue in a previous thread.

aka FATBOYS69
DeWayne

Yes DeWayne... but looking at the panard bar it wouldn't matter if it were in it's original location. With the 6" drop the panard bar crosses the center of the diff cover rather than across the top.

fatboys69 · 07-17-2008, 06:51 PM

OK, wasn't sure. How you been? Staying busy ? I've been trying to keep Kaylor busy !!!

jb4short · 07-17-2008, 07:42 PM

Quote:

Originally Posted by fatboys69

OK, wasn't sure. How you been? Staying busy ? I've been trying to keep Kaylor busy !!!

Tell him to quit whining about his $40.00...HAHAHAHAHAHA

Staying busy; still need a lot of stuff to finish the truck. Going to start bodywork Tuesday...yeah dust!

SCOTI · 07-17-2008, 08:59 PM

I believe CPP or ECE makes a 'curved' panhard bar that clears those deep aluminum style pumpkin covers.

68_chop_top · 07-18-2008, 02:01 PM

I have a T/A aluminum cover that hits my panard bar. I have ground a small amount away on the cover to have just the slightest gap. I like the cover - just wished I didn't have to grind on it.

07-17-2008, 04:29 PM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Question for lowered guys I got a new Spectre Racing differential cover in from Jeg's today (12 bolt). With the truck lowered the cover is too deep (wants to be where the panard bar is). Does anyone know a high quality cover (billet, cast aluminum, etc.) for the GM 12 bolt that's not as deep (needs to be within one inch of stock depth)? BTW: look for a beautiful cover in the FS section Last edited by jb4short; 07-17-2008 at 04:29 PM.

07-17-2008, 06:30 PM	#2
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Question for lowered guys John, does it have the tracbar relocated to the bottom of the control arm?? Don't know if it will make a difference but it might. Seems I remember seeing something about this issue in a previous thread. aka FATBOYS69 DeWayne

07-17-2008, 06:51 PM	#4
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Question for lowered guys OK, wasn't sure. How you been? Staying busy ? I've been trying to keep Kaylor busy !!!

07-17-2008, 08:59 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: Question for lowered guys I believe CPP or ECE makes a 'curved' panhard bar that clears those deep aluminum style pumpkin covers. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-18-2008, 02:01 PM	#7
68_chop_top Registered User Join Date: May 2008 Location: Granbury, TEXAS Posts: 250	Re: Question for lowered guys I have a T/A aluminum cover that hits my panard bar. I have ground a small amount away on the cover to have just the slightest gap. I like the cover - just wished I didn't have to grind on it. __________________ Mine is chopped, has a clutch, and a big block.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.