Can i solid mount my transmission? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lyrikz · 07-21-2008, 11:23 PM

Im making a tranny crossmember and wanted to know if i could mount the transmission DIRECTLY to the crossmember. Its a th400 trans with 454 if it matters. It will be driven at least 2/3 times a week. Is it necessary to have the rubber mount in between??? Anyone know where i can get the rubber mount portion if it is necessary???

Spray-Bomb · 07-21-2008, 11:31 PM

I wouldnt unless you solid mount you engine too

lyrikz · 07-22-2008, 12:35 AM

Quote:

Originally Posted by Spray-Bomb

I wouldnt unless you solid mount you engine too

Any ideas where i can pick one of the rubber mounts up? Im looking at these aftermarket crossmembers and none of em seem to come with the rubber mount portion.

Longhorn Man · 07-22-2008, 12:37 AM

any parts store can get it.
If you mou nt the tranny solid, but not the engine, you WILL break the tranny in 2.

stllookn · 07-22-2008, 12:51 AM

Lyrikz, I have a parts truck with cross member and rubber mount for a TH400 if you want to pull it. I am on the East Hill in Kent.

Is your truck a 3/4 ton? I might have some other parts you may have some interest in as well.

lyrikz · 07-22-2008, 12:48 PM

Quote:

Originally Posted by stllookn

Lyrikz, I have a parts truck with cross member and rubber mount for a TH400 if you want to pull it. I am on the East Hill in Kent.

Is your truck a 3/4 ton? I might have some other parts you may have some interest in as well.

I bought some metal to make my own tranny crossmember. Im going to pick up a rubber mount and at least TRY this. If it doesnt work i will let you know.

Ackattack · 07-22-2008, 01:24 AM

I got a polyurethane tranny mount from summit.

70rs/ss · 07-22-2008, 12:18 PM

I'd do the urethane mounts as the BBC has a bit o torq and over time will tear the OE replacement types. As for the solid mounting I agree with the above, only if the motor is and then only in a race set-up.

**steelhorse** · 07-22-2008, 12:19 PM

Agree with above if you solid mount it the case will probably crack.

Longhorn Man · 07-22-2008, 08:03 PM

Quote:

Originally Posted by steelhorse

Agree with above if you solid mount it the case will probably crack.

no probably about it... it WILL break the tranny.

lyrikz · 07-22-2008, 08:05 PM

Quote:

Originally Posted by Longhorn Man

no probably about it... it WILL break the tranny.

I will definetly have the rubber mount. I will post a quick pic of the Xmember im making.

07-21-2008, 11:23 PM	#1
lyrikz PITbut Join Date: Sep 2007 Location: monroe washington Posts: 3,052	Can i solid mount my transmission? Im making a tranny crossmember and wanted to know if i could mount the transmission DIRECTLY to the crossmember. Its a th400 trans with 454 if it matters. It will be driven at least 2/3 times a week. Is it necessary to have the rubber mount in between??? Anyone know where i can get the rubber mount portion if it is necessary???

07-21-2008, 11:31 PM	#2
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Can i solid mount my transmission? I wouldnt unless you solid mount you engine too __________________ Just not low enough... ----------------------------- Sinister Killer

07-22-2008, 12:37 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Can i solid mount my transmission? any parts store can get it. If you mou nt the tranny solid, but not the engine, you WILL break the tranny in 2.

07-22-2008, 12:51 AM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Can i solid mount my transmission? Lyrikz, I have a parts truck with cross member and rubber mount for a TH400 if you want to pull it. I am on the East Hill in Kent. Is your truck a 3/4 ton? I might have some other parts you may have some interest in as well. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 07-22-2008 at 12:53 AM.

07-22-2008, 01:24 AM	#7
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: Can i solid mount my transmission? I got a polyurethane tranny mount from summit. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

07-22-2008, 12:18 PM	#8
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Can i solid mount my transmission? I'd do the urethane mounts as the BBC has a bit o torq and over time will tear the OE replacement types. As for the solid mounting I agree with the above, only if the motor is and then only in a race set-up.

07-22-2008, 12:19 PM	#9
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: Can i solid mount my transmission? Agree with above if you solid mount it the case will probably crack.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.