|
|
|
11-13-2002, 08:53 PM
|
#1 |
|
faster, faster, faster
Join Date: Dec 2001
Location: Houston ,Texas ,USA
Posts: 1,354
|
HELP What headers for...
angled plug heads? When I installed my engine the Hooker Comps I had bought for it hit the tranny bellhousing on the passenger side, so I had to use the stock angly dumps, and they are choking my engine. I need to find some decent headers that will clear the th350 and the 700r4 when I install it. This is such a pain in the butt. If I knew it was this hard to find headers to fit these heads I would have bought straight plug heads. Has anyone else ever had trouble fitting their Hooker Comps because of tranny clearance issues, or where mine just possibly bent in shipping? Thanks for your help guys.
__________________
I'm going to Law School, wanna debate? It's good practice. Last edited by my new 72; 11-13-2002 at 11:27 PM. |
|
|
|
11-13-2002, 09:42 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
I have Hooker comps on the longhorn, & not a bit of trouble with fit. the 383 is runnin straight plug edelbrock rpm heads, & has a 400 turbo behind it.....the headers dont come even close to the trans.....
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
11-13-2002, 10:21 PM
|
#3 |
|
Account Suspended
Join Date: Feb 2002
Location: Jonesville NC
Posts: 149
|
hooker super comp at summit for 339.95 i have the same promile with my bowtie head i would trade heads with some bvody for a set or vortec in a heart beat
|
|
|
|
|
11-13-2002, 10:21 PM
|
#4 |
|
Account Suspended
Join Date: Feb 2002
Location: Jonesville NC
Posts: 149
|
you need part # 2440hkr
|
|
|
|
|
11-13-2002, 10:34 PM
|
#5 |
|
Registered User
Join Date: Aug 2001
Location: Long Beach, Ca
Posts: 1,432
|
My Comps have lots of clearance both when I had the stick in it and now with the TH350. The Supers exit about 2 inches shorter than the Comps do.
__________________
71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> |
|
|
|
|
11-13-2002, 10:38 PM
|
#6 |
|
faster, faster, faster
Join Date: Dec 2001
Location: Houston ,Texas ,USA
Posts: 1,354
|
Where do I get part number 2440hkr, and what is it? A spacer or something.
__________________
I'm going to Law School, wanna debate? It's good practice. |
|
|
|
|
11-13-2002, 10:55 PM
|
#7 |
|
Account Suspended
Join Date: Feb 2002
Location: Jonesville NC
Posts: 149
|
i pm you
|
|
|
|
|
11-13-2002, 11:02 PM
|
#8 |
|
faster, faster, faster
Join Date: Dec 2001
Location: Houston ,Texas ,USA
Posts: 1,354
|
Anyone else?
__________________
I'm going to Law School, wanna debate? It's good practice. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
