Anyone reproduce this part? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyman680063 · 08-04-2008, 11:59 PM

I wanted to know if anyone reproduced the heater box (think that's what it's called but I could be wrong). As you can see from the picture I'm going to need a new one since mine is cracked around where the heater motor is. Thanks.

mas09ts · 08-05-2008, 12:46 AM

I don't think they remake it. I checked every site I know and didn't have any luck. But maybe you can find a good one off another truck.

dan42 · 08-05-2008, 12:49 AM

Junkyards. That's where I got mine. I still have to put it in.

Dusty_case · 08-05-2008, 01:48 AM

You know I looked through my part catalogs and found motors to ac dryers but no heater housing sorry

Chevyman680063 · 08-05-2008, 04:49 AM

I didn't think anyone did. I've gone through all my parts catalogs and could never find one but just wanted to make sure there wasn't a company I hadn't heard of yet that was making them. Last time I went to the local junkyard all the 67-72's there had already had that part removed.

Andy4639 · 08-05-2008, 05:46 AM

These guys say they can redo a housing on other models. Might give them a call. Here is there web link. They aren't new but!

http://www.classicautoair.com/GM-Factory.asp

**special-K** · 08-05-2008, 06:33 AM

Call Bill Athey/site vendor and see if he still has any laying around.I turned down taking a bunch last spring.Very reasonable.

Green Machine · 08-05-2008, 09:37 AM

Check the parts board, not too hard to find, I might have spare one too, have to check my stuff.

big_al_71 · 08-05-2008, 09:41 AM

I am taking the one off my truck in the near future to add my new a/c system living in florida I dont need a heater.....

Ackattack · 08-05-2008, 12:00 PM

I have one or two sitting in my garage I could ship to you. PM me if interested.

ChevLoRay · 08-05-2008, 12:14 PM

I wish it was just a heater/ac box that was bad on mine. All of the sheet metal around the hole at the plenum is shot on mine....inside and out. Looks like it's gonna be interesting....

**Hart_Rod** · 08-05-2008, 02:09 PM

I've got the complete heater setup, inside and out if you are interested. It's in very nice shape.

Pics here:

http://www.67-72chevytrucks.com/vboa...d.php?t=299024

08-04-2008, 11:59 PM	#1
Chevyman680063 Registered User Join Date: Aug 2006 Location: Georgia Posts: 850	Anyone reproduce this part? I wanted to know if anyone reproduced the heater box (think that's what it's called but I could be wrong). As you can see from the picture I'm going to need a new one since mine is cracked around where the heater motor is. Thanks. Attached Images

08-05-2008, 12:46 AM	#2
mas09ts Registered User Join Date: Jul 2008 Location: Gate City VA Posts: 576	Re: Anyone reproduce this part? I don't think they remake it. I checked every site I know and didn't have any luck. But maybe you can find a good one off another truck. __________________ Mitch 22yrs. Young 1970 GMC Short-Step 350/TH350 Combo. . . . Sold Dec 2011 Current Project 68 Gmc "Second Chance" Go to my 68 GMC Shorty Rebuild Thread http://67-72chevytrucks.com/vboard/s...39#post6341739

08-05-2008, 12:49 AM	#3
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Anyone reproduce this part? Junkyards. That's where I got mine. I still have to put it in. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-05-2008, 01:48 AM	#4
Dusty_case Registered User Join Date: Apr 2008 Location: spokane valley wa Posts: 112	Re: Anyone reproduce this part? You know I looked through my part catalogs and found motors to ac dryers but no heater housing sorry __________________ 1968 c10 250/3spd

08-05-2008, 04:49 AM	#5
Chevyman680063 Registered User Join Date: Aug 2006 Location: Georgia Posts: 850	Re: Anyone reproduce this part? I didn't think anyone did. I've gone through all my parts catalogs and could never find one but just wanted to make sure there wasn't a company I hadn't heard of yet that was making them. Last time I went to the local junkyard all the 67-72's there had already had that part removed. Last edited by Chevyman680063; 08-05-2008 at 04:50 AM.

08-05-2008, 05:46 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Anyone reproduce this part? These guys say they can redo a housing on other models. Might give them a call. Here is there web link. They aren't new but! http://www.classicautoair.com/GM-Factory.asp __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-05-2008, 06:33 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Anyone reproduce this part? Call Bill Athey/site vendor and see if he still has any laying around.I turned down taking a bunch last spring.Very reasonable. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-05-2008, 09:37 AM	#8
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Anyone reproduce this part? Check the parts board, not too hard to find, I might have spare one too, have to check my stuff. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0 Last edited by Green Machine; 08-05-2008 at 09:37 AM.

08-05-2008, 09:41 AM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Anyone reproduce this part? I am taking the one off my truck in the near future to add my new a/c system living in florida I dont need a heater..... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-05-2008, 12:00 PM	#10
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: Anyone reproduce this part? I have one or two sitting in my garage I could ship to you. PM me if interested. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

08-05-2008, 12:14 PM	#11
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Anyone reproduce this part? I wish it was just a heater/ac box that was bad on mine. All of the sheet metal around the hole at the plenum is shot on mine....inside and out. Looks like it's gonna be interesting.... __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

08-05-2008, 02:09 PM	#12
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Anyone reproduce this part? I've got the complete heater setup, inside and out if you are interested. It's in very nice shape. Pics here: http://www.67-72chevytrucks.com/vboa...d.php?t=299024 __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.