Cab Rolling Jig? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spectrum · 08-06-2008, 02:20 PM

I saw a pic a few months ago, now I can't seem to locate it. The one whrere the cab is mounted in a jig that can roll any way so you can get access to the bottom.

Thanks

**scotts62** · 08-06-2008, 04:28 PM

Are you talking about something like this?

Cab dolly

spectrum · 08-06-2008, 04:38 PM

Yes but one that also rolls on its front, back and sides like a rotisserie.

Some one here sells plans for one as well as plans for a bar that goes on a engine hoist so you can remove the cab by yourself.

I just can't find the link.

Thanks

spectrum · 08-06-2008, 04:46 PM

Found it...

A Board member named Rokcrln sells plans

For the Cab Flip

http://www.bumpandgrindgarage.com/1213226.html

For the Cab Lift

http://67-72chevytrucks.com/vboard/s...06#post1941906

SIR · 08-06-2008, 05:10 PM

or was it this one I DID NOT make this tool!.

08-06-2008, 02:20 PM	#1
spectrum Registered User Join Date: May 2006 Location: Anchorage, Alaska Posts: 8	Cab Rolling Jig? I saw a pic a few months ago, now I can't seem to locate it. The one whrere the cab is mounted in a jig that can roll any way so you can get access to the bottom. Thanks __________________ 2002 GMC Sierra Z71 1966 Chevy Stepside C10

08-06-2008, 04:28 PM	#2
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Cab Rolling Jig? Are you talking about something like this? Cab dolly __________________ Scott 93 crew cab build Project 62

08-06-2008, 04:38 PM	#3
spectrum Registered User Join Date: May 2006 Location: Anchorage, Alaska Posts: 8	Re: Cab Rolling Jig? Yes but one that also rolls on its front, back and sides like a rotisserie. Some one here sells plans for one as well as plans for a bar that goes on a engine hoist so you can remove the cab by yourself. I just can't find the link. Thanks __________________ 2002 GMC Sierra Z71 1966 Chevy Stepside C10

08-06-2008, 04:46 PM	#4
spectrum Registered User Join Date: May 2006 Location: Anchorage, Alaska Posts: 8	Re: Cab Rolling Jig? Found it... A Board member named Rokcrln sells plans For the Cab Flip http://www.bumpandgrindgarage.com/1213226.html For the Cab Lift http://67-72chevytrucks.com/vboard/s...06#post1941906 __________________ 2002 GMC Sierra Z71 1966 Chevy Stepside C10

08-06-2008, 05:10 PM	#5
SIR SIR Join Date: Apr 2005 Location: grants pass oregon,usa Posts: 658	Re: Cab Rolling Jig? *or was it this one I DID NOT make this tool!.* Attached Images __________________ 66long low fleet http://community.webshots.com/user/LVNR66



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.