WTB Dana 44 axle shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sandking · 08-08-2008, 07:58 PM

I was going to upgrade to chromoly axles, but instead, I will be upgrading to a Dana 60 later. For now, I just need a replacement long, driver side shaft. It measures 36-1/8" from the center of the u-joint to the end of the shaft. I dont need the other side or the stub shafts or even the u-joints. I am hoping someone has one of these laying around that is straight. Thanks, Joey

BCOWANWHEELS · 08-08-2008, 08:25 PM

there on ebay all the time

sandking · 08-08-2008, 08:31 PM

Not right now........Besides, I dont want to spend $100 either. I did see a complete set awhile back for $30 or so. But nothing on there now.

msgross · 08-08-2008, 11:27 PM

I just sold one today for $20 at the swap meet.... sorry

sandking · 08-09-2008, 12:27 AM

Quote:

Originally Posted by msgross

I just sold one today for $20 at the swap meet.... sorry

Just my luck.

**jerry moss** · 08-09-2008, 09:51 AM

which year '44 do you have-69 and older, 70, 71-72, or 73 on up ? let me know and i'll check my "stash".

sandking · 08-09-2008, 11:37 AM

I have a '72. As long as the shaft is the same length of 36.13, and the slpine count of 30, it should work. Thanks!!

sandking · 08-10-2008, 11:40 AM

Quote:

Originally Posted by sandking

I have a '72. As long as the shaft is the same length of 30.13, and the slpine count of 30, it should work. Thanks!!

The measurment is suppose to be 36.13, sorry 'bout that.

sandking · 08-09-2008, 11:26 PM

Bump

**jerry moss** · 08-10-2008, 09:55 AM

i haven't got a chance to look yet, i know i have a complete axle but still need to see if i have a inner by itself.

sandking · 08-10-2008, 11:40 AM

Quote:

Originally Posted by jerry moss

i haven't got a chance to look yet, i know i have a complete axle but still need to see if i have a inner by itself.

Just let me know, Thanks.

sandking · 08-10-2008, 09:10 PM

Bump

OLDCHEV4X4 · 08-11-2008, 07:08 AM

Watch.....the u joint size changed in 73 0r 74.

OLDCHEV4X4 · 08-11-2008, 07:10 AM

From a 1.062 to 1.1875

sandking · 08-11-2008, 08:23 AM

I beleive I have the 760 joints.

**jerry moss** · 08-11-2008, 09:30 AM

i finally got out there and all i have left are complete shafts, i guess i've sold off all my seperate pieces. if you're interested, i'll sell a complete shaft for 30 bucks plus shipping.

sandking · 08-11-2008, 08:11 PM

Quote:

Originally Posted by jerry moss

i finally got out there and all i have left are complete shafts, i guess i've sold off all my seperate pieces. if you're interested, i'll sell a complete shaft for 30 bucks plus shipping.

Are you in L.A. County or up by San Fran?

sandking · 08-11-2008, 10:58 AM

Whats the cost to ship to 92882? Thanks!!

sandking · 08-12-2008, 08:30 AM

Bump

sandking · 08-12-2008, 11:20 PM

Still looking...............

**jerry moss** · 08-13-2008, 09:20 AM

i'm up in the S.F. bay area. i haven't been able to get an exact cost on shipping, working too many hours . i would guess shipping in the $20.00 area, so if you want it for 50 bucks delivered, it's yours.

sandking · 08-13-2008, 09:34 PM

PM sent.

sandking · 08-19-2008, 10:44 PM

Bump, anybody else?

sandking · 08-21-2008, 08:25 AM

Ttt

sandking · 08-22-2008, 08:53 PM

Still looking........

08-08-2008, 07:58 PM	#1
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	WTB Dana 44 axle shaft I was going to upgrade to chromoly axles, but instead, I will be upgrading to a Dana 60 later. For now, I just need a replacement long, driver side shaft. It measures 36-1/8" from the center of the u-joint to the end of the shaft. I dont need the other side or the stub shafts or even the u-joints. I am hoping someone has one of these laying around that is straight. Thanks, Joey __________________ . . . . . View my build thread HERE

08-08-2008, 08:25 PM	#2
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: WTB Dana 44 axle shaft there on ebay all the time __________________ I BELIEVE IN JOHN 3:16

08-08-2008, 08:31 PM	#3
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Not right now........Besides, I dont want to spend $100 either. I did see a complete set awhile back for $30 or so. But nothing on there now. __________________ . . . . . View my build thread HERE Last edited by sandking; 08-08-2008 at 08:32 PM.

08-08-2008, 11:27 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB Dana 44 axle shaft I just sold one today for $20 at the swap meet.... sorry __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-09-2008, 09:51 AM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: WTB Dana 44 axle shaft which year '44 do you have-69 and older, 70, 71-72, or 73 on up ? let me know and i'll check my "stash". __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-09-2008, 11:37 AM	#7
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft I have a '72. As long as the shaft is the same length of 36.13, and the slpine count of 30, it should work. Thanks!! __________________ . . . . . View my build thread HERE Last edited by sandking; 08-10-2008 at 07:43 PM.

08-09-2008, 11:26 PM	#9
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Bump __________________ . . . . . View my build thread HERE

08-10-2008, 09:55 AM	#10
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: WTB Dana 44 axle shaft i haven't got a chance to look yet, i know i have a complete axle but still need to see if i have a inner by itself. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-10-2008, 09:10 PM	#12
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Bump __________________ . . . . . View my build thread HERE

08-11-2008, 07:08 AM	#13
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: WTB Dana 44 axle shaft Watch.....the u joint size changed in 73 0r 74. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

08-11-2008, 07:10 AM	#14
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: WTB Dana 44 axle shaft From a 1.062 to 1.1875 __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

08-11-2008, 08:23 AM	#15
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft I beleive I have the 760 joints. __________________ . . . . . View my build thread HERE

08-11-2008, 09:30 AM	#16
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: WTB Dana 44 axle shaft i finally got out there and all i have left are complete shafts, i guess i've sold off all my seperate pieces. if you're interested, i'll sell a complete shaft for 30 bucks plus shipping. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-11-2008, 10:58 AM	#18
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Whats the cost to ship to 92882? Thanks!! __________________ . . . . . View my build thread HERE

08-12-2008, 08:30 AM	#19
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Bump __________________ . . . . . View my build thread HERE



Register or Log In To remove these advertisements.

08-12-2008, 11:20 PM	#20
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Still looking............... __________________ . . . . . View my build thread HERE

08-13-2008, 09:20 AM	#21
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: WTB Dana 44 axle shaft i'm up in the S.F. bay area. i haven't been able to get an exact cost on shipping, working too many hours . i would guess shipping in the $20.00 area, so if you want it for 50 bucks delivered, it's yours. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-13-2008, 09:34 PM	#22
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft PM sent. __________________ . . . . . View my build thread HERE

08-19-2008, 10:44 PM	#23
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Bump, anybody else? __________________ . . . . . View my build thread HERE

08-21-2008, 08:25 AM	#24
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Ttt __________________ . . . . . View my build thread HERE

08-22-2008, 08:53 PM	#25
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: WTB Dana 44 axle shaft Still looking........ __________________ . . . . . View my build thread HERE

Register or Log In To remove these advertisements.