FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Bowties** · 08-11-2008, 10:01 PM

Parting out a 67 GMC Custom 1/2 ton, with buddy bucket bench, factory tach and positraction rear. Edit-Everything has been sold off of this one, body and frame is most likely honda/toyota parts by now.
I am up I-5 north twice a month with several stops between Portland, OR. & Marysville, WA. and I am also usually down I-5 south in the Grants Pass/Medford, OR. areas at least once a month and could assist with the buddy seat or any other large stuff.

Cyclone44 · 08-11-2008, 10:04 PM

How much for the tach???....Thanks Ksjh1316...I didn't see that

**CPNE** · 08-11-2008, 10:28 PM

I'm interested in the choke knob and cable and the headlight wiring harness if you part it

**Classic Bowties** · 08-12-2008, 11:20 PM

Quote:

Originally Posted by CPNE

I'm interested in the choke knob and cable and the headlight wiring harness if you part it

I'll check this stuff out and let you know in the am...

**Classic Bowties** · 08-13-2008, 08:16 PM

Quote:

Originally Posted by CPNE

I'm interested in the choke knob and cable and the headlight wiring harness if you part it

the deluxe choke knob and mount is there only as a hole filler, no cable attached anymore $10., headlight harness is complete and in good shape with no dead end wires or missing plugs - it does have a few butt connector splices but all looks to be where it should be $30., gmc deluxe horn button is in decent shape and better than alot I have seen - some very light checking but still looks pretty nice $40., I will ship all of the above usps priority for $12., so your total would be $92.

**CPNE** · 08-13-2008, 10:04 PM

Sold! Let me know how to make payment, paypal or mo. You can PM me the details. Thanks

Quote:

Originally Posted by Classic Bowties

the deluxe choke knob and mount is there only as a hole filler, no cable attached anymore $10., headlight harness is complete and in good shape with no dead end wires or missing plugs - it does have a few butt connector splices but all looks to be where it should be $30., gmc deluxe horn button is in decent shape and better than alot I have seen - some very light checking but still looks pretty nice $40., I will ship all of the above usps priority for $12., so your total would be $92.

*ksjh1316* · 08-11-2008, 11:15 PM

Quote:

Originally Posted by Cyclone44

How much for the tach???....Per board rules you have to put a price on items for sale....

Its all posted on his link BTW nice truck wish she would have come in 6 mo ago when I was needing a ton of GMC parts

jeremiah king · 08-11-2008, 11:56 PM

I will take the motor stands please pm me!!!

**Classic Bowties** · 08-13-2008, 01:45 AM

Quote:

Originally Posted by jeremiah king

I will take the motor stands please pm me!!!

They are original sb towers that have been modified (thats why this cheap) to clear the bbc exhaust manifolds, previous owner was a fabricator of twenty plus years and did a nice job on them for his bbc conversion. Lmk if you are still interested and I can get you some pics.

**Classic Bowties** · 08-13-2008, 08:21 PM

Quote:

Originally Posted by jeremiah king

I will take the motor stands please pm me!!!

Here are pics of the sb towers that have been converted for use with bbc and manifolds, I will usps priority ship them to you for the $45. asking price.

GMC Jim · 08-13-2008, 06:09 AM

interested in the fan shroud..... condition???

**Classic Bowties** · 08-13-2008, 08:30 PM

Quote:

Originally Posted by GMC Jim

interested in the fan shroud..... condition???

bbc shroud is in good overall condition, it is priced at $45. because it does need some repair on the top but no pieces are missing. This would be an easy epoxy fix and its priced right if you are willing to repair.

**special-K** · 08-13-2008, 09:48 AM

Will you pull the wing vent assemblies?What I real need are the two glass pieces and the complete latch assembly.Is it SoftRay tint?
I`m also interested in the fender badges and how is the tailgate?Grille?Bumper brackets?Door panels?Seat belts,red original?Window winders and door handles original?

**CPNE** · 08-13-2008, 10:25 AM

One more thing, I'd like the horn button if it's the chrome GMC one with the clear plastic insert. Pic, price, condition?

Thanks

**Classic Bowties** · 08-13-2008, 08:56 PM

Quote:

Originally Posted by special-K

Will you pull the wing vent assemblies?What I real need are the two glass pieces and the complete latch assembly.Is it SoftRay tint?
I`m also interested in the fender badges and how is the tailgate?Grille?Bumper brackets?Door panels?Seat belts,red original?Window winders and door handles original?

the pass. side door was swapped at some point so only has the drv. side 67 type but it is kinda crusty, has been repaired at wing hinge point with a srcew and has clear glass in wing - not worth shipping, custom fender badges are in ok shape but do have some pitting, they are definitely restorable - $40. shipped, tailgate is correct small panel but is in rough shape - would'nt be worth shipping, grille is rough and pushed in several spots and rusting - would'nt be worth shipping, front bumper brackets are good and straight - $30. shipped all four, door panels are redone/custom black vinyl with matching padded glove door?, belts are long gone and window cranks/door handles are the later more commonly found 68 & up type (I think you have a pallet of these).

**Classic Bowties** · 08-13-2008, 09:16 PM

Quote:

Originally Posted by bad421

how much for the grill and filler panel and rad support?

See above, grille is rough shape and filler panel has rust thru on lower edge, rad support is gone.

Quote:

Originally Posted by Gary 70 Jimmy

put me 2nd in line if it has a chrome horn button and any fender emblems if they are good.

2nd behind CPNE on the deluxe horn button - Sold
2nd behind special-k on the fender emblems
grille is rough - not worth shipping

Quote:

Originally Posted by michael bustamante

2 nd in line for the left vent window assy. thanks

left wing is rough and probably not worth pulling/shipping

bad421 · 08-13-2008, 03:23 PM

how much for the grill and filler panel and rad support?

**Gary 70 Jimmy** · 08-13-2008, 03:34 PM

put me 2nd in line if it has a chrome horn button and any fender emblems if they are good.

mahanian · 08-13-2008, 04:20 PM

Is the ram assist power steering complete? If so I'm interested...

mahanian · 08-13-2008, 09:45 PM

Quote:

Originally Posted by mahanian

Is the ram assist power steering complete? If so I'm interested...

Still interested...

**Classic Bowties** · 08-13-2008, 11:00 PM

Quote:

Originally Posted by mahanian

Is the ram assist power steering complete? If so I'm interested...

No not complete, as in you would need a pump and pump mounting brackets, take a look at the pics and let me know if and what parts you would need/want, are you planning on having this stuff shipped?

**michael bustamante** · 08-13-2008, 06:15 PM

2 nd in line for the left vent window assy. thanks

**Gary 70 Jimmy** · 08-13-2008, 06:21 PM

Might be interested in the grill if it is any good

**SOON2BLAZE** · 08-13-2008, 08:57 PM

posted while I wrote thanks

mahanian · 08-13-2008, 11:39 PM

Yes, I would need it shipped, that might put it out of my price range. Any play in the gearbox? I would need that too since mine is shot. Shipping quote to 85224?

08-11-2008, 10:01 PM	#1
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,686	FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest Parting out a 67 GMC Custom 1/2 ton, with buddy bucket bench, factory tach and positraction rear. Edit-Everything has been sold off of this one, body and frame is most likely honda/toyota parts by now. I am up I-5 north twice a month with several stops between Portland, OR. & Marysville, WA. and I am also usually down I-5 south in the Grants Pass/Medford, OR. areas at least once a month and could assist with the buddy seat or any other large stuff. Attached Images Last edited by Classic Bowties; 01-25-2009 at 10:44 PM. Reason: updated info

08-11-2008, 10:04 PM	#2
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest How much for the tach???....Thanks Ksjh1316...I didn't see that Last edited by Cyclone44; 08-12-2008 at 08:04 PM.

08-11-2008, 10:28 PM	#3
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest I'm interested in the choke knob and cable and the headlight wiring harness if you part it __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-11-2008, 11:56 PM	#8
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest I will take the motor stands please pm me!!!

08-13-2008, 06:09 AM	#11
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest interested in the fan shroud..... condition??? __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

08-13-2008, 09:48 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest Will you pull the wing vent assemblies?What I real need are the two glass pieces and the complete latch assembly.Is it SoftRay tint? I`m also interested in the fender badges and how is the tailgate?Grille?Bumper brackets?Door panels?Seat belts,red original?Window winders and door handles original? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 08-13-2008 at 09:55 AM.

08-13-2008, 10:25 AM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest One more thing, I'd like the horn button if it's the chrome GMC one with the clear plastic insert. Pic, price, condition? Thanks __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-13-2008, 03:23 PM	#17
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest how much for the grill and filler panel and rad support? __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

08-13-2008, 03:34 PM	#18
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest put me 2nd in line if it has a chrome horn button and any fender emblems if they are good.

08-13-2008, 04:20 PM	#19
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest Is the ram assist power steering complete? If so I'm interested...

08-13-2008, 06:15 PM	#22
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest 2 nd in line for the left vent window assy. thanks __________________ 1967custom

08-13-2008, 06:21 PM	#23
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest Might be interested in the grill if it is any good

08-13-2008, 08:57 PM	#24
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest posted while I wrote thanks Last edited by SOON2BLAZE; 08-13-2008 at 09:00 PM.

08-13-2008, 11:39 PM	#25
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest Yes, I would need it shipped, that might put it out of my price range. Any play in the gearbox? I would need that too since mine is shot. Shipping quote to 85224? __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.