![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Hoarding Rusty Objects
Join Date: Aug 2002
Location: Slatington, PA
Posts: 267
|
Body interchange question..
Will a 1967 sb stepside body fit on a later 4x4 chassis? Like a 73+? If so what work has to be done?
__________________
1985 Chevrolet K20 Silverado 1994 GMC Yukon Follow me on Youtube! - http://www.youtube.com/user/FuelInjectionSucks |
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
well, problem number one is that 73 frames were lengthened considerably and the body frame mount brackets are all different and so are frame bumper horns, youd have to cut length of frame down where neded and swap on 67-72 frame mounts and do something about bumper horns, ask mudder67, he has done all this to his, youll need wleder and other items to do this, its custom work.
good luck |
![]() |
![]() |
![]() |
#3 |
Almost Satisfied
![]() Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
|
Check out Mudder67's truck. His 67 is on a 78 frame I believe. It looks great. He had to take a couple inches out of the frame, but it wasn't a bad swap he said. I'm sure he will post you some details here, but you could PM him.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
73-87 are 4.5" lkonger wheelbase than 63-67, plus may be a differnece of frame rail length before front axle and after rear axle which would have to be cut off or added to to make same as 67-72, ive never actually taken the effort to measure other differneces other than width and wheelbase, but i have weighed a longbed 2wd frame with aut crossmember minus frotn cradle and it was 200 lbs total, bare 12 bolt axle housing is 75 lbs, cradle is real light, spindles with rotors and calipers mounted are 60lbs each for light duty 1" rotors spindles, cant remember right now what 12 bolt chunk with gears weighs
Last edited by Fast68Chevy; 11-14-2002 at 06:08 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|