WTB steel bed floor patch panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mater · 08-15-2008, 02:43 PM

look for 48" wide by atleast 18" long. longer if good. don't need perfect just don't want any rot through. Don't want repop for $$ and alignment. 2-4 patches depending on size; thanks!

Wootdog · 08-15-2008, 03:28 PM

I know you said you didn't want repop, but, I actually found them in the JC Whitney catalog. Ordering them was a different story. They wanted to back order them for me three months out. That was two summers ago. They may have them in stock now. Worth a phone call.
Kerry

**t korinek** · 08-16-2008, 02:11 AM

I have a complete rust free longbed floor, I'll sell each section for $20 + shipping.
Complete floor for $100 In AZ

67mater · 08-18-2008, 09:53 AM

got any pictures? think it could be cut across the middle and shipped?

jb4short · 08-18-2008, 11:50 AM

There are actually NEW tools for bedfloor sections which are MUCH better than before.

**t korinek** · 08-19-2008, 03:10 AM

I think it would be expensive shipping, That would be a 4x4 sheet if they were both sandwichd together. maybe greyhound could do it,I'm going out of town for the week, I'll. be back sat. if your still interested I can get pics
Tom

08-15-2008, 02:43 PM	#1
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	WTB steel bed floor patch panels look for 48" wide by atleast 18" long. longer if good. don't need perfect just don't want any rot through. Don't want repop for $$ and alignment. 2-4 patches depending on size; thanks! __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

08-15-2008, 03:28 PM	#2
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,688	Re: WTB steel bed floor patch panels I know you said you didn't want repop, but, I actually found them in the JC Whitney catalog. Ordering them was a different story. They wanted to back order them for me three months out. That was two summers ago. They may have them in stock now. Worth a phone call. Kerry __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

08-16-2008, 02:11 AM	#3
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: WTB steel bed floor patch panels I have a complete rust free longbed floor, I'll sell each section for $20 + shipping. Complete floor for $100 In AZ __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-18-2008, 09:53 AM	#4
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: WTB steel bed floor patch panels got any pictures? think it could be cut across the middle and shipped? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

08-18-2008, 11:50 AM	#5
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: WTB steel bed floor patch panels There are actually NEW tools for bedfloor sections which are MUCH better than before.

08-19-2008, 03:10 AM	#6
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: WTB steel bed floor patch panels I think it would be expensive shipping, That would be a 4x4 sheet if they were both sandwichd together. maybe greyhound could do it,I'm going out of town for the week, I'll. be back sat. if your still interested I can get pics Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.