Post your dashes & guage clusters - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ol'Rover · 08-22-2008, 10:02 PM

trying to get ideas for Dash's and guage clusters. Post your custom, modified and even stock dash's.

Thanks.

-Kurt

463 · 08-22-2008, 10:11 PM

though i would try the blue look (sun supper tac mix and match with the factory tac dash)

463 · 08-22-2008, 10:38 PM

here is the truck from down the street

killer71 · 08-22-2008, 10:45 PM

Here ya go http://67-72chevytrucks.com/vboard/s...d.php?t=241100

**KevsClassics** · 08-23-2008, 12:23 AM

Here's some I reconditioned.

tdave00 · 08-23-2008, 01:29 AM

Where did you get this steering wheel from. Sharp!

**KevsClassics** · 08-23-2008, 01:42 AM

Quote:

Originally Posted by tdave00

Where did you get this steering wheel from. Sharp!

www.billetspecialties.com

eightbanger · 08-29-2008, 04:58 AM

[/QUOTE

Who sells these chrome tilt colums for our trucks???

gcburdic · 08-29-2008, 07:46 AM

Quote:

Originally Posted by eightbanger

[/QUOTE

Who sells these chrome tilt colums for our trucks???

Hey banger....I think Flaming River does (http://www.flamingriver.com/index.cf...htm).....check with 'pickmup' too I think he's a dealer....

Good luck

fun in dirt · 08-29-2008, 09:33 AM

I used Auto Meter sport comps and they fit tight in the existing holes! (I know this pic isn't the greatest but it's all I have on this computer)

fatboys69 · 08-29-2008, 10:42 AM

I used the Covans insert with Autometer UltraLites

GKsport67 · 08-23-2008, 02:13 AM

Kev your blazer is the epitome of Classic/Modern!!!

...maybe its Modern/Classic?
Nice work!

1969stepside · 08-23-2008, 02:15 AM

can you roll the speedo back?

mrein3 · 08-23-2008, 08:54 AM

Here's what I'm rolling with...

Andy4639 · 08-23-2008, 10:22 AM

Mine is factory tach with a added speed warning buzzer. I also added the clock out of a later 70's truck.

Richard8971 · 08-24-2008, 08:53 PM

Quote:

Originally Posted by 1969stepside

can you roll the speedo back?

Yup, sure can. Here is mine.

D

Ol'Rover · 08-24-2008, 09:08 PM

Quote:

Originally Posted by Richard8971

Yup, sure can. Here is mine.

D

i like that bezel. i think i might do something like that bud in blue. and only the 3 guage holes, Spedo, tach, Combo(volt,oil pressure,water temp, fuel)

thanks for the ideas!

awhite4557 · 08-24-2008, 09:50 PM

I went with the Dakota Digital dash, IDIDIt tilt auto column with Billet Specialties steering wheel.

Ol'Rover · 08-23-2008, 10:09 PM

great stuff! keep em comin!

67_C-30 · 08-23-2008, 10:56 PM

The first is the cluster in my ramp truck. The bezel has been painted with balck polyurethane and had a Cheyenne Super woodgrain decal with white overlays. I used the white decals on the faces and on the tins (instead of painting the tins white) and sanded the letters and numbers off of the factory lens, and polished it out clear. I didn't care for the greenish looking letters against the white. Its a little different looking than most.

The second is the cluster that is going in my '67 C-30. It has a vacuum gauge a 4000 RPM diesel tach. I am going to put a woodgrain decal on it also, but I'm going to paint it with textured bedliner paint like I did on the glove box lid of my '69 C-10. Really different!

corn · 08-24-2008, 03:10 AM

Mine, nothin special though...

ChevLoRay · 08-24-2008, 08:53 PM

Quote:

Originally Posted by corn

Mine, nothin special though...

Engine-turned is "nothing special"?

This is a look I want, too. I have a nephew who did some engine turning for his '79 T/A dash.

The look you got is what I hope to have. Maybe the same thing as an applique on the glove box door, too. I'll be using Mahanians' radio surround and I'm thinking it'll all look good when (ever) I'm done.

72-c20 · 08-29-2008, 01:01 PM

Quote:

Originally Posted by corn

Mine, nothin special though...

nice. I've got some blue vinyl with that type of design (fresnel lense). I'll have to see if that's work....

tommys69/454 · 08-24-2008, 07:38 AM

this is mine

biggreen292 · 08-24-2008, 08:47 PM

cant see it but has an aftermarket vacuum gauge where the factory one would be. looks 70's vintage. and yes there are new pedal pads on it now

08-22-2008, 10:02 PM	#1
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Post your dashes & guage clusters trying to get ideas for Dash's and guage clusters. Post your custom, modified and even stock dash's. Thanks. -Kurt __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

08-22-2008, 10:11 PM	#2
463 Registered User Join Date: Nov 2007 Location: Sask Canada Posts: 1,666	Re: Post your dashes & guage clusters though i would try the blue look (sun supper tac mix and match with the factory tac dash) __________________ Trueman Last edited by 463; 08-22-2008 at 10:14 PM.

08-22-2008, 10:38 PM	#3
463 Registered User Join Date: Nov 2007 Location: Sask Canada Posts: 1,666	Re: Post your dashes & guage clusters here is the truck from down the street __________________ Trueman

08-22-2008, 10:45 PM	#4
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Post your dashes & guage clusters Here ya go http://67-72chevytrucks.com/vboard/s...d.php?t=241100 __________________ R.I.P. Killer 71 10/26/07

08-23-2008, 12:23 AM	#5
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: Post your dashes & guage clusters Here's some I reconditioned. Attached Images

08-23-2008, 01:29 AM	#6
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Post your dashes & guage clusters Where did you get this steering wheel from. Sharp! __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor

08-29-2008, 04:58 AM	#8
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Post your dashes & guage clusters [/QUOTE Who sells these chrome tilt colums for our trucks??? __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

08-29-2008, 09:33 AM	#10
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,119	Re: Post your dashes & guage clusters I used Auto Meter sport comps and they fit tight in the existing holes! (I know this pic isn't the greatest but it's all I have on this computer) Attached Images __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

08-29-2008, 10:42 AM	#11
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Post your dashes & guage clusters I used the Covans insert with Autometer UltraLites Attached Images

08-23-2008, 02:13 AM	#12
GKsport67 Registered User Join Date: Jan 2008 Location: Atlanta,Ga Posts: 660	Re: Post your dashes & guage clusters Kev your blazer is the epitome of Classic/Modern!!! ...maybe its Modern/Classic? Nice work! __________________ www.gkautospa.com Like A Rock! http://67-72chevytrucks.com/vboard/s...d.php?t=397153 Last edited by GKsport67; 08-23-2008 at 02:25 AM.

08-23-2008, 02:15 AM	#13
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,176	Re: Post your dashes & guage clusters can you roll the speedo back? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

08-23-2008, 08:54 AM	#14
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Re: Post your dashes & guage clusters Here's what I'm rolling with... Attached Images __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

08-23-2008, 10:22 AM	#15
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Post your dashes & guage clusters Mine is factory tach with a added speed warning buzzer. I also added the clock out of a later 70's truck. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-24-2008, 09:50 PM	#18
awhite4557 Registered User Join Date: Dec 2007 Location: Odessa, Texas Posts: 212	Re: Post your dashes & guage clusters I went with the Dakota Digital dash, IDIDIt tilt auto column with Billet Specialties steering wheel. Attached Images __________________ 1950 Chevy 3100 Ramp Bed 1-ton http://67-72chevytrucks.com/vboard/s...d.php?t=749386 1965 Chevy Step Side 1971 Chevy Short Wide Bed http://67-72chevytrucks.com/vboard/s...d.php?t=277191 1971 Chevy Chevelle 1972 Chevrolet C-30 1 ton 2002 Winnebego Class A MH Ford E-550 Chassis V-10 2005 Dodge Ram 2500 5.9 Cummins 2008 GMC Denali 2020 Jeep Wrangler Unlimited Rubicon

08-23-2008, 10:09 PM	#19
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Post your dashes & guage clusters great stuff! keep em comin! __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.



Register or Log In To remove these advertisements.

08-23-2008, 10:56 PM	#20
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Post your dashes & guage clusters The first is the cluster in my ramp truck. The bezel has been painted with balck polyurethane and had a Cheyenne Super woodgrain decal with white overlays. I used the white decals on the faces and on the tins (instead of painting the tins white) and sanded the letters and numbers off of the factory lens, and polished it out clear. I didn't care for the greenish looking letters against the white. Its a little different looking than most. The second is the cluster that is going in my '67 C-30. It has a vacuum gauge a 4000 RPM diesel tach. I am going to put a woodgrain decal on it also, but I'm going to paint it with textured bedliner paint like I did on the glove box lid of my '69 C-10. Really different! Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 08-24-2008 at 11:18 PM.

08-24-2008, 03:10 AM	#21
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Post your dashes & guage clusters Mine, nothin special though...

08-24-2008, 07:38 AM	#24
tommys69/454 1969 short box Join Date: Sep 2007 Location: waterloo,newyork Posts: 146	Re: Post your dashes & guage clusters this is mine Attached Images __________________ tommy morehouse

08-24-2008, 08:47 PM	#25
biggreen292 Registered User Join Date: Apr 2008 Location: manchester,nh Posts: 44	Re: Post your dashes & guage clusters cant see it but has an aftermarket vacuum gauge where the factory one would be. looks 70's vintage. and yes there are new pedal pads on it now __________________ http://i16.photobucket.com/albums/b3...fleet041-1.jpg 71 custom camper/20:292/saginaw, my first pickup 83 cutlass cruiser:307/th250c, lifelong project 96 caprice 9C1:LT1/4L60E, police package 83 buick regal estate: buick 350/m20 69 bel air:250/m21 Last edited by biggreen292; 08-24-2008 at 08:48 PM.

Register or Log In To remove these advertisements.