Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-01-2008, 10:58 PM | #1 |
Registered User
Join Date: Aug 2007
Location: Meridian, Idaho
Posts: 27
|
What Starter do I need?
Need some help if someone could take the time.. Question I have is I'm swapping out the stock truck 4 speed in my 67 C10 to a 700R4 from an 87 suburban. I have the 292 in the truck and I will need a starter that mounts to the block instead of to the bell housing. Is this a small block chevy starter with the in-line bolt pattern? Thanks, Mike
|
09-01-2008, 11:28 PM | #2 |
Senior Member
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
|
Re: What Starter do I need?
Here is a bump for you. Hopefully someone can chime in with some helpful info.
__________________
A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
09-02-2008, 12:02 AM | #3 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: What Starter do I need?
why not just get a starter for a 292 with an automatic?
|
09-02-2008, 11:08 AM | #4 |
It's a catastrophic success.
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: What Starter do I need?
It will depend on whether you use a 168 toothed flywheel or a 153.
168 uses a stagger, 153 uses inline bolt pattern |
09-02-2008, 08:52 PM | #5 |
Registered User
Join Date: Aug 2007
Location: Meridian, Idaho
Posts: 27
|
Re: What Starter do I need?
Thanks for the replies. I pretty much figured the 292 auto starter would be what I would buy, but was hoping it might be the same as a SB starter, I will get with the local parts store tomorrow. Thanks again...
|
Bookmarks |
|
|