![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
![]() Join Date: Jan 2001
Location: Katy, TX...but the love of my life resides in Dublin,OH.
Posts: 1,408
|
![]()
I have an interesting situation. I have no dash lights, running lights or brake lights. I switched the headlight switch...not it... and I already had headlights. the flashers work but I don't have turn signals? the brake light switch is functioning properly... but isn't getting power? where do you think my problem is??
|
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: Oct 2002
Location: Olathe, KS
Posts: 2,301
|
Have you double checked fuses? Rotate the fuses, there could be a corrosion problem.
If the brake light switch doesnt have power on one terminal, you have a wiring problem from the fuse block (assuming the fuse is good) to the switch. Find out why you have no power to this switch! I would start with that circuit first, its the easiest to trace and could lead you the problem thats causing all of it. |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jan 2001
Location: Katy, TX...but the love of my life resides in Dublin,OH.
Posts: 1,408
|
correction....
I have turn signals and there is power to the stoplight switch. I have checked all the fuses they are fine. I removed the fuse block to check behind it... looks ok. I removed the junction block on the firewall... no corrosion. I followed the white wire coming out of the stoplight switch up to the half circle connector behind the dash. this goes to the turn signal crap in the column... right? I'm getting a little frustrated... so I'm going to stop and pick up tomorrow. any ideas?
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,950
|
check all of your grounds . bad grounds can cause some pretty weird things to happen.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
![]() |
![]() |
![]() |
#5 |
Account Suspended
Join Date: Oct 2002
Location: Olathe, KS
Posts: 2,301
|
If the turn signal switch is bad, you could loose brake lights, tail lights and turn signals.
If you have a good switched power coming from the stop light switch, follow that as far as you can into the turn signal switch. Make sure there's power as far as you can check it. Next check the green and blue (I believe), these are your stop/turn signal wires coming out of the turn signal switch, do they have power when you press on the brake? If you know there's power going in and nothing coming out, the T/S switch is bad. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2002
Location: grove city pa usa
Posts: 628
|
had this problem also and it was the pink and red wire on the back side of the fuse block (the inside part behind the plastic cover that toches the inside fire wall) make sure that the connection is good with a test light i just had to clean up the conection and it was fine hope that works for ya
__________________
67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!! |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Mar 2002
Location: Dallas, TX
Posts: 555
|
Hey DD,
Had some of these same problems and replaced my turn signal mechanism. Fixed all my problems. When are you sending the thermo housing back? No hurry just wondering. Erl
__________________
1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX |
![]() |
![]() |
![]() |
Bookmarks |
|
|