|
|
|
09-11-2008, 05:43 PM
|
#1 |
|
Registered User
Join Date: Oct 2006
Location: Simpsonville, SC
Posts: 255
|
hazard help
when i first got my truck, all the electrical stuff and lights worked. then i went and broke the hazard switch in the ON position while trying to test them out. when i reached in and tried to pull the switch back out with my needle-nose pliers, i shorted something out (what i thought was the switch). i then endured months of no blinkers and the parking lights coming on with the brake pedal.
so i FINALLY got around to pulling apart my column and replacing the turn signal switch. everything's back together and everything works except the hazards. the flasher is good (worked in the turn signal spot). blinkers work at all four corners. any ideas on where to look? the only other electrical mod is LED tail lights from musclerodz (great product, by the way) thanks for the help
__________________
1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration. |
|
|
|
09-11-2008, 10:51 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: hazard help
you tested the fuses? i can't remember off the top of my head what else is on the circuit with them
|
|
|
|
|
09-14-2008, 05:06 PM
|
#3 |
|
Registered User
Join Date: Oct 2006
Location: Simpsonville, SC
Posts: 255
|
Re: hazard help
thanks longhornman. that was the ticket. can't believe i didn't look there sooner.
__________________
1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
