Window washer pump location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

elektrik · 09-12-2008, 11:13 PM

Hi guys-my washer pump hasn't worked since before I owned the truck (although, it may have stopped working shortly after-don't honestly remember. The motor SOUNDS like it's trying to squirt, even though it doesn't work. No matter, I've purchased a rebuild kit for it and I just have one small question....

Can anyone provide a picture of where the darn thing is????!!!

Thanks!

dwcsr · 09-12-2008, 11:14 PM

mine is on the wiper motor

knsmodels · 09-12-2008, 11:34 PM

dont have a pic but it is on the inside of the truck under the dashboard....if you shine a light up under the dash right between the ash tray and gas pedal you will see it up there.....not much fun to get to either.......

big_al_71 · 09-13-2008, 12:01 AM

Here is a pict where I think it is at,,,,I found it while stripping the cab out completely....

68GMCCustom · 09-13-2008, 12:12 AM

yup....top right of the image above ^

jorgensensc · 09-13-2008, 01:16 AM

Just my opinion, take it for what it's worth. I haven't had much luck rebuilding these pumps. And when they start to go bad they leak inside your cab. I like to use an electric inline washer pump (9.99) and connect it in the engine bay. That way if it leaks for whatever reason, I don't have wet carpet/ or the radio doesn't get wet on the backside. Just a thought.
SHawn

Sinister · 09-13-2008, 10:03 AM

Quote:

Originally Posted by jorgensensc

Just my opinion, take it for what it's worth. I haven't had much luck rebuilding these pumps. And when they start to go bad they leak inside your cab. I like to use an electric inline washer pump (9.99) and connect it in the engine bay. That way if it leaks for whatever reason, I don't have wet carpet/ or the radio doesn't get wet on the backside. Just a thought.
SHawn

How do you wire those up to work with the wiper switch?

68gmsee · 09-13-2008, 10:44 AM

Quote:

Originally Posted by Sinister

How do you wire those up to work with the wiper switch?

On my 69, I spliced into the hot wire going to the pump. I didn't like all the noise of the original pump -and it is somewhat inefficient.

big_al_71 · 09-13-2008, 11:51 AM

do what I am doing!!!!
get rid of it!!!!

Andy4639 · 09-13-2008, 01:09 PM

Here is what I used and it works off the orignal switch also.

Southpa · 09-13-2008, 09:24 PM

elektrik , I hope you've already ruled out the obvious. You say the pump sounds like its working, just make sure all lines are clear, filter is clean as well as those little squirters pointing at your windshield. Its amazing what a cutting torch tip cleaner can accomplish!

elektrik · 09-13-2008, 10:44 PM

Quote:

Originally Posted by Southpa

elektrik , I hope you've already ruled out the obvious. You say the pump sounds like its working, just make sure all lines are clear, filter is clean as well as those little squirters pointing at your windshield. Its amazing what a cutting torch tip cleaner can accomplish!

I did-I'm pretty sure it isn't working correctly, but that's a good point-I'll just hook up some hose and see if the pump pumps at all first...else I'm just gonna rebuild....

Herman Pereira · 06-30-2011, 04:19 PM

help new member,need help wiring wiper switch to wiper motor. any help will be helpfull thank you Herman

**LockDoc** · 06-30-2011, 06:22 PM

Quote:

Originally Posted by Herman Pereira

help new member,need help wiring wiper switch to wiper motor. any help will be helpfull thank you Herman

Posted by member Putter in another thread...

Yellow wires at the motor are the 12v+ wires. (Wire leaves fuse box, then runs to motor, then jumps to second pin on motor...see picture)
The Dark Blue wire (when grounded) is for the WASH feature. (It's the wire closest to you in the photo)
The Black wire (when grounded) is for HIGH speed.
The Light Blue wire (when grounded at the same time as the Black) is for LOW speed. (It's the wire that is in the background in the picture)

The plug on the back of the switch will only plug in one way. The switch has to be in the hole before it will work because that is the ground connection for it.

LockDoc

BBrendal · 07-01-2011, 01:27 AM

subscribed

*JonnyC10* · 07-24-2014, 10:13 PM

I know this is old, but I picked up an Anco inline pump today with a power wire and a ground.

What do I hook up to? The red to the dark blue or ?

09-12-2008, 11:13 PM	#1
elektrik Foolish Mortal Join Date: Mar 2007 Location: Livermore, CA Posts: 243	Window washer pump location Hi guys-my washer pump hasn't worked since before I owned the truck (although, it may have stopped working shortly after-don't honestly remember. The motor SOUNDS like it's trying to squirt, even though it doesn't work. No matter, I've purchased a rebuild kit for it and I just have one small question.... Can anyone provide a picture of where the darn thing is????!!! Thanks!

09-12-2008, 11:14 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Window washer pump location mine is on the wiper motor

09-12-2008, 11:34 PM	#3
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	Re: Window washer pump location dont have a pic but it is on the inside of the truck under the dashboard....if you shine a light up under the dash right between the ash tray and gas pedal you will see it up there.....not much fun to get to either....... __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd

09-13-2008, 12:01 AM	#4
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Window washer pump location Here is a pict where I think it is at,,,,I found it while stripping the cab out completely.... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-13-2008, 12:12 AM	#5
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Window washer pump location yup....top right of the image above ^ __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

09-13-2008, 01:16 AM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Window washer pump location Just my opinion, take it for what it's worth. I haven't had much luck rebuilding these pumps. And when they start to go bad they leak inside your cab. I like to use an electric inline washer pump (9.99) and connect it in the engine bay. That way if it leaks for whatever reason, I don't have wet carpet/ or the radio doesn't get wet on the backside. Just a thought. SHawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

09-13-2008, 11:51 AM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Window washer pump location do what I am doing!!!! get rid of it!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-13-2008, 01:09 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Window washer pump location Here is what I used and it works off the orignal switch also. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-13-2008, 09:24 PM	#11
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,409	Re: Window washer pump location elektrik , I hope you've already ruled out the obvious. You say the pump sounds like its working, just make sure all lines are clear, filter is clean as well as those little squirters pointing at your windshield. Its amazing what a cutting torch tip cleaner can accomplish! __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. Last edited by Southpa; 09-13-2008 at 09:25 PM.

06-30-2011, 04:19 PM	#13
Herman Pereira Registered User Join Date: Feb 2011 Location: Franklin NC Posts: 1	Re: Window washer pump location help new member,need help wiring wiper switch to wiper motor. any help will be helpfull thank you Herman

07-01-2011, 01:27 AM	#15
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: Window washer pump location subscribed __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/

07-24-2014, 10:13 PM	#16
JonnyC10 Account Suspended Join Date: Jul 2014 Location: NH Posts: 280	Re: Window washer pump location I know this is old, but I picked up an Anco inline pump today with a power wire and a ground. What do I hook up to? The red to the dark blue or ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.