Trade Dropped Spindles for Stock ?????/ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dream57 · 09-17-2008, 10:28 AM

I'm not sure if I can ask this in a forum...but would anyone like to trade their 1972 disk brake stock spindles for my disk 2 Inch ? They are still on the truck and are from Early Classic. Truck is to low to take my son camping...Thanks.

67ChevyRedneck · 09-17-2008, 10:34 AM

I would be interested!

My truck is a driver, so not sure how this would work? Is yours being driven now? I'm getting married next weekend and will be gone until Oct. 5th for the honeymoon. My spindles are off of a 71 (disk brake spindles, same as a 72) and are in very good condition.

67dragtruck · 09-17-2008, 10:35 AM

Quote:

Originally Posted by Dream57

I'm not sure if I can ask this in a forum...but would anyone like to trade their 1972 disk brake stock spindles for my disk 2 Inch ? They are still on the truck and are from Early Classic. Truck is to low to take my son camping...Thanks.

I'm don't know about the rules for trades like this, but if it is allowed you won't have any trouble getting somebody to take you up on that one. You ought to just go ahead and pay the $25 bucks. Lots of good info here.

Tom

**steelhorse** · 09-17-2008, 10:41 AM

If it doesnt work for 67chevyredneck I have a set I am cleaning up this weekend to sell.I would be interested in a trade and even willing to pay the shipping.

uno67 · 09-17-2008, 10:54 AM

I got a set. if the others fall threw or if shipping becomes a concern. thanks

**lolife99** · 09-17-2008, 11:01 AM

If the truck is too low,... why not just change out the front springs?

67ChevyRedneck · 09-17-2008, 11:06 AM

Quote:

Originally Posted by lolife99

If the truck is too low,... why not just change out the front springs?

Spindles would actually be a little easier and wouldn't require the truck be realinged, just check to make sure the toe is still correct. I dropped my s-10 with spindles and only had to adjust the tie rods a couple turns to get everything back square. Not sure if you even need to do this with ECE stuff?

67dragtruck · 09-17-2008, 11:25 AM

Quote:

Originally Posted by lolife99

If the truck is too low,... why not just change out the front springs?

He probably has stock height springs with the drop spindles now.

**lolife99** · 09-17-2008, 12:14 PM

If the truck is the one in his avatar,... Then I would say it has dropped spindles AND dropped/cut springs.

sfcmess · 09-17-2008, 12:41 PM

Put me in line for the trade if others fall through. I have a 72 C10 with discs.

tcb-1 · 09-17-2008, 12:43 PM

I hear a mod coming, quick everyone scatter.....

67ChevyRedneck · 09-17-2008, 12:46 PM

Quote:

Originally Posted by tcb-1

I hear a mod coming, quick everyone scatter.....

Nothing wrong with a straight up trade.

shortbed70 · 09-17-2008, 05:43 PM

Put me in line I have some 72 stockers that are painted

Longhorn Man · 09-17-2008, 07:29 PM

i'm far down on the list... but I'm game on a swap too.
And since he is not selling, it is OK.

killer71 · 09-17-2008, 07:35 PM

I believe i still have the ones from the killer build up you could HAVE if your willing to pay the shipping!

68 short step · 09-17-2008, 08:12 PM

Quote:

Originally Posted by killer71

I believe i still have the ones from the killer build up you could HAVE if your willing to pay the shipping!

plus they are sandblasted and powdercoated (gloss black)........

killer71 · 09-17-2008, 08:42 PM

tell ya what...i'll mail ya my spindles if you will mail 68 shortstep yours...that sound like a deal?

dubdeuce80 · 09-17-2008, 08:50 PM

i am in mesa, and i have the front spindles from the '69 i just bought that i am not going to use. if you can come over and remove them they are yours free, although i am not sure about compatabilty, i'm new to the 67-72's

*Dylan · 09-17-2008, 08:51 PM

Hey Killer, what all from a disc break assembly do you have? I'd be interested in buying some of it off of you if you're interested in selling and the deal with this guy falls through, or does not get to you. Send me a PM and let me know please.

Thanks,
Dylan

killer71 · 09-17-2008, 09:26 PM

Quote:

Originally Posted by *Dylan

Hey Killer, what all from a disc break assembly do you have? I'd be interested in buying some of it off of you if you're interested in selling and the deal with this guy falls through, or does not get to you. Send me a PM and let me know please.

Thanks,
Dylan

i should have everything in those picts!!!

*Dylan · 09-17-2008, 09:33 PM

Quote:

Originally Posted by killer71

i should have everything in those picts!!!

So, spindles and dust shields(don't know if that's what they are)?

LUV2XCLR8 · 09-17-2008, 08:52 PM

I just tossed a set 2 weeks ago

see ten · 09-17-2008, 09:07 PM

Quote:

Originally Posted by LUV2XCLR8

I just tossed a set 2 weeks ago

I sold a set of stockers once for $40 bucks......Now I've got three sets that I can't seem to give away!

Anybody who lives close enough to come by and pick em up can have em if they're going to use em!

killer71 · 09-17-2008, 09:37 PM

Pardon me...but yea yur right....we went back with everything but the spindles...

huero · 09-17-2008, 09:44 PM

Put me in line. I am in Long Beach, Ca. I'll even pay shipping both ways.

09-17-2008, 10:28 AM	#1
Dream57 Registered User Join Date: May 2008 Location: Glendale, Arizona Posts: 3	Trade Dropped Spindles for Stock ?????/ I'm not sure if I can ask this in a forum...but would anyone like to trade their 1972 disk brake stock spindles for my disk 2 Inch ? They are still on the truck and are from Early Classic. Truck is to low to take my son camping...Thanks. __________________ Dream57

09-17-2008, 10:34 AM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Trade Dropped Spindles for Stock ?????/ I would be interested! My truck is a driver, so not sure how this would work? Is yours being driven now? I'm getting married next weekend and will be gone until Oct. 5th for the honeymoon. My spindles are off of a 71 (disk brake spindles, same as a 72) and are in very good condition. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 09-17-2008 at 10:37 AM.

09-17-2008, 10:41 AM	#4
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: Trade Dropped Spindles for Stock ?????/ If it doesnt work for 67chevyredneck I have a set I am cleaning up this weekend to sell.I would be interested in a trade and even willing to pay the shipping.

09-17-2008, 10:54 AM	#5
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: Trade Dropped Spindles for Stock ?????/ I got a set. if the others fall threw or if shipping becomes a concern. thanks

09-17-2008, 11:01 AM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Trade Dropped Spindles for Stock ?????/ If the truck is too low,... why not just change out the front springs? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-17-2008, 12:14 PM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Trade Dropped Spindles for Stock ?????/ If the truck is the one in his avatar,... Then I would say it has dropped spindles AND dropped/cut springs. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-17-2008, 12:41 PM	#10
sfcmess Registered User Join Date: Aug 2008 Location: Claremore, OK Posts: 19	Re: Trade Dropped Spindles for Stock ?????/ Put me in line for the trade if others fall through. I have a 72 C10 with discs.

09-17-2008, 12:43 PM	#11
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Trade Dropped Spindles for Stock ?????/ I hear a mod coming, quick everyone scatter..... __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

09-17-2008, 05:43 PM	#13
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Trade Dropped Spindles for Stock ?????/ Put me in line I have some 72 stockers that are painted Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

09-17-2008, 07:29 PM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Trade Dropped Spindles for Stock ?????/ i'm far down on the list... but I'm game on a swap too. And since he is not selling, it is OK.

09-17-2008, 07:35 PM	#15
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Trade Dropped Spindles for Stock ?????/ I believe i still have the ones from the killer build up you could HAVE if your willing to pay the shipping! __________________ R.I.P. Killer 71 10/26/07

09-17-2008, 08:42 PM	#17
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Trade Dropped Spindles for Stock ?????/ tell ya what...i'll mail ya my spindles if you will mail 68 shortstep yours...that sound like a deal? __________________ R.I.P. Killer 71 10/26/07

09-17-2008, 08:50 PM	#18
dubdeuce80 Registered User Join Date: Feb 2007 Location: Arizona Posts: 213	Re: Trade Dropped Spindles for Stock ?????/ i am in mesa, and i have the front spindles from the '69 i just bought that i am not going to use. if you can come over and remove them they are yours free, although i am not sure about compatabilty, i'm new to the 67-72's Last edited by dubdeuce80; 09-17-2008 at 08:51 PM.

09-17-2008, 08:51 PM	#19
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: Trade Dropped Spindles for Stock ?????/ Hey Killer, what all from a disc break assembly do you have? I'd be interested in buying some of it off of you if you're interested in selling and the deal with this guy falls through, or does not get to you. Send me a PM and let me know please. Thanks, Dylan __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

09-17-2008, 08:52 PM	#22
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Trade Dropped Spindles for Stock ?????/ I just tossed a set 2 weeks ago __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

09-17-2008, 09:37 PM	#24
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Trade Dropped Spindles for Stock ?????/ Pardon me...but yea yur right....we went back with everything but the spindles... __________________ R.I.P. Killer 71 10/26/07 Last edited by killer71; 09-17-2008 at 09:38 PM.

09-17-2008, 09:44 PM	#25
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: Trade Dropped Spindles for Stock ?????/ Put me in line. I am in Long Beach, Ca. I'll even pay shipping both ways. Last edited by huero; 09-17-2008 at 09:45 PM.

Register or Log In To remove these advertisements.