![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Gotta Startem Early
Join Date: Oct 2001
Location: Amarillo, TX, USA
Posts: 364
|
Clean Firewall Without the Master Cylinder?
Can a master cylinder from an older truck, one that mounts on the frame under the cab be used on on of our trucks? Does someone sell a kit for this type of conversion? That would really smooth out a firewall.
__________________
67 SWB In Progress, one piece at a time, maybe 3 years I will be finished |
![]() |
![]() |
![]() |
#2 |
Getting cabin fever?!?!?!
Join Date: Oct 2002
Location: chisholm, mn
Posts: 1,679
|
check out www.totalcostinvolved.com . they have a frame rail mounted master cylinder. haven't used it, but heard good things about them. they're power brakes but might take some doing to adapt to our trucks tho.
__________________
Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic Last edited by yellowgmc; 11-19-2002 at 01:10 PM. |
![]() |
![]() |
![]() |
#3 |
chevelito
Join Date: Jun 2001
Location: Honolulu, HI USA
Posts: 1,609
|
turner enterprises has one in their ad. I sent them a letter for a catalog because the phone # was wrong. I'll let you know if I get one.
jay
__________________
New deadline...when my son can drive. ![]() Aloha from Honolulu, HI |
![]() |
![]() |
![]() |
#4 |
Gotta Startem Early
Join Date: Oct 2001
Location: Amarillo, TX, USA
Posts: 364
|
Does Turner Ent. have a web site?
__________________
67 SWB In Progress, one piece at a time, maybe 3 years I will be finished |
![]() |
![]() |
![]() |
#5 |
chevelito
Join Date: Jun 2001
Location: Honolulu, HI USA
Posts: 1,609
|
not yet.
jay
__________________
New deadline...when my son can drive. ![]() Aloha from Honolulu, HI |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,501
|
There are some special considerations for valving when you mount the master cylinder lower than the wheel cylinders. Check out www.mpbrakes.com for details.
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2002
Posts: 462
|
frame mounting
make a cardoard cutout of the unit to check fitment under frame. exhaust can play a big factor when mounting as can shift rods.
you will need to add residual valves in the system to keep fluid from backing up. the aforementioned mpbrakes is a good place to start, great sit with plenty of info. oh, you will have to install a door in the floor of the pickup to access the master to fill it up. oh, you also gotta get a new brake pedal assembly too. good luck! Last edited by CustomChevy; 11-19-2002 at 08:49 PM. |
![]() |
![]() |
![]() |
#8 |
chevelito
Join Date: Jun 2001
Location: Honolulu, HI USA
Posts: 1,609
|
hopefully the turner enterprise system will eliminate the work in figuring things out ....if the catalog ever comes in.
jay
__________________
New deadline...when my son can drive. ![]() Aloha from Honolulu, HI |
![]() |
![]() |
![]() |
Bookmarks |
|
|