|
09-23-2008, 11:13 PM | #1 |
Registered User
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
|
Power locks?
How many of you have put in power door locks? Whose setup did you use and how difficult was it? any major mods required?
Dano |
09-23-2008, 11:32 PM | #2 |
Too Dumb To Know Better
Join Date: Nov 2005
Location: Texas
Posts: 882
|
Re: Power locks?
I've got them. Not a hard install. drill 2 holes behind the panel where they can't be seen, bend the rod a little bit, run the wires and you're done. You will probably have to take your door off to drill the holes. Mine were form Auotloc and part of the security system. They work great.
|
09-23-2008, 11:35 PM | #3 |
Registered User
Join Date: Apr 2008
Location: texas
Posts: 127
|
Re: Power locks?
ya i got them too from lmc truck.....2 remotes 2 power lock actuators and the control box for the keyless entry......real nic it was 90bucks for everything like they said up there.....2 little holes to mount the actuator connect the rod...and your done...i never took off my door.....pretty simple and not very time consuming either....
|
09-24-2008, 08:54 AM | #4 |
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Power locks?
Any pics of what the wires going through the door look like?
|
09-25-2008, 12:27 AM | #5 |
Too Dumb To Know Better
Join Date: Nov 2005
Location: Texas
Posts: 882
|
Re: Power locks?
I don't have a better one on this computer. I pulled these looms from a Saturn. There is enough room for my future power window wires
|
10-01-2008, 07:04 AM | #6 |
Registered User
Join Date: Jan 2008
Location: Piedmont , SC
Posts: 728
|
Re: Power locks?
do these bolt on the door and cowl ? I was looking at some that slide in and out of a hole thatwas drilled in both , like this
__________________
My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2 |
10-01-2008, 08:12 AM | #7 |
Registered User
Join Date: Dec 2007
Location: Santa Maria, Ca.
Posts: 1,423
|
Re: Power locks?
No wires just contacts. Bad thing is you can't roll the window down when the door is open.
__________________
69 Chevy 4x4 383 Power |
10-01-2008, 09:37 AM | #8 |
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Power locks?
Thanks for pics, low'n slow. Looks good and good idea using the Saturn loom. I think I'll go for it.
The contacts and slides are other options I hadn't thought about. |
Bookmarks |
|
|