|
|
|
09-24-2008, 07:42 PM
|
#1 |
|
Registered User
Join Date: Jan 2008
Location: chino valley arizona
Posts: 79
|
dont know what to do
i have a 75 chevy blazer with an 8 inch lift and i just put a 205 in it. i called to get a price on a new driveline the price came to ge around $350. i also need a new yoke for a 12 bolt rearend and the driveline guy said around $75 for that. this is going to cost alot so is there anything else i can do instead of buying a brand new one. would a junk yard be a good idea or should i try to make my own. also on the back of the 205 does there have to be a cv joint i didnt think so but i was told otherwise. if you could help me out i would greatly appreciate it.
__________________
LIFTED OR LOWERED EITHER WAY STOCK SUCKS 75 Chevy blazer 86 trx 250R 1990 Ford Ranger 2wd prerunner project |
|
|
|
09-25-2008, 05:26 PM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: dont know what to do
nothing wrong with junkyard parts as long as you inspect them first... u joints etc are alot cheaper than buying a whole new driveline
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
09-28-2008, 11:08 PM
|
#3 |
|
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Re: dont know what to do
Damn man thats spendy I would take some time and check the junkyards first. Make sure to inspect the drive lines closely though. If you can find a good one it should be alot cheaper even with u-joints.
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold  -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit   -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER  I would rather push a Chevy then drive a ford!!
 |
|
|
|
|
09-30-2008, 01:51 PM
|
#4 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: dont know what to do
You may be able to use a conversion u-joint to avoid having to replace the yoke. They run about $25 or so at Napa.
|
|
|
|
|
10-07-2008, 10:59 PM
|
#5 |
|
Registered User
Join Date: Jan 2008
Location: chino valley arizona
Posts: 79
|
Re: dont know what to do
i bought the drive line 271 ouch thats a lot of dough
__________________
LIFTED OR LOWERED EITHER WAY STOCK SUCKS 75 Chevy blazer 86 trx 250R 1990 Ford Ranger 2wd prerunner project |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
