The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-28-2008, 06:46 PM   #1
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
WTB parts for my 4x4 conversion project

I'm about to begin work on my latest project to put a 72 GMC 3/4 ton 4x4 chassis under mt 69 3/4 ton 2wd. My doner truck and chassis needs some parts and I also need some parts to make a complete truck out of the leftovers. I can do paypal.MO,certified check just let me know your preference. Thanks in advance,heres the list;
Auto trans shifter linkage from column to trans with frame bracket
Clutch hole cover
Stock rear springs(you guys who lifted your truck are tripping over these!)
Upper center dash section(to patch hole dumb PO cut for speaker thru speaker grill,entire top dash would be OK)
Small block frame brackets(for the 2wd,big block going in 4x4)
Fleetside bed tailgate straps
Heres the "I'm dreaming" list(hey,ya never know you guys have a lot of stuff thats pretty rare!!!!)
Set of decent cab light lenses
3/4 ton hubs(original style)
TH400 to NP 205 adapter(early figure eight bolt pattern)
NP 205 input gear for TH400
Probably will add to this list as the project progresses. Any referals to parts sources will be greatly appreciated. Thanks again for any help
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 09-28-2008, 06:52 PM   #2
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: WTB parts for my 4x4 conversion project

what kind of cab lenses? brossow has a dash, i'll PM him this thread...
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 09-28-2008, 07:00 PM   #3
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

The lenses are not the hockey puck style,but the little more aerodynamic looking ones. I can get a pic if needed.
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 09-28-2008, 07:21 PM   #4
JimKshortstep4x4
Senior Member
 
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
Re: WTB parts for my 4x4 conversion project

I have a clutch hole cover, (metal one with the two holes) that I can send you for $6 (includes shipping).

Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end
1965 Impala SS 400 sbc, Muncie rock crusher
1966 Impala SS 396 bbc, TH 400
1969 El Camino, 350 sbc, TH 350
1971 Snowplow built on a Blazer frame
1972 GMC Short bed, stepside, TH 400, 427 BBC
JimKshortstep4x4 is offline   Reply With Quote
Old 09-28-2008, 07:22 PM   #5
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

Heres a pic of the cab light lense that I need. Also while you are all looking around in your parts piles(and I know you all have one...or two....or three...)I could use a locker or limited slip carrier for a Dana 60 with 4.56 gears. Another alternative would be 4.10 gears and carrier for the Dana 60 and a set of 410 gears for the Dana 44.
Attached Images
 
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 09-28-2008, 07:23 PM   #6
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

Thanks,jimkshortstep4x4. How would you like to be paid?
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 09-29-2008, 04:35 AM   #7
JimKshortstep4x4
Senior Member
 
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
Re: WTB parts for my 4x4 conversion project

I have (5) cab lights but I believe that only three are complete and useable as is. If interested I will dig them out and make you a good package deal.

Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end
1965 Impala SS 400 sbc, Muncie rock crusher
1966 Impala SS 396 bbc, TH 400
1969 El Camino, 350 sbc, TH 350
1971 Snowplow built on a Blazer frame
1972 GMC Short bed, stepside, TH 400, 427 BBC
JimKshortstep4x4 is offline   Reply With Quote
Old 09-29-2008, 09:42 AM   #8
4bynut
Senior Member
 
4bynut's Avatar
 
Join Date: Mar 2004
Location: Morrison, IL
Posts: 793
Re: WTB parts for my 4x4 conversion project

I have these:
TH400 to NP 205 adapter(early figure eight bolt pattern)
NP 205 input gear for TH400

I have the complete NP205 from a th400. Do you need the tailshaft out of the trans also. I also have shifters and crossmembers.

Thanks,
Jason
__________________
2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans.
2001 Chevy ZR2 Ext. cab 4x4 (DD)
1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process)
1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)
4bynut is offline   Reply With Quote
Old 09-29-2008, 09:57 AM   #9
Jtrux
I'm a poor spectator
 
Jtrux's Avatar
 
Join Date: Aug 2006
Location: San Antonio, Tx
Posts: 2,287
Re: WTB parts for my 4x4 conversion project

Do you want 1/2 ton springs or 3/4 ton springs??
__________________
2006 Jeep Unlimited IMPACT ORANGE

1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig

1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!!

1979 Ford F150 4x4 SWB Built Ford Tough!!!

1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!
Jtrux is offline   Reply With Quote
Old 09-28-2008, 07:55 PM   #10
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: WTB parts for my 4x4 conversion project

those are different than the lights that I have...
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 09-28-2008, 11:32 PM   #11
brossow
Amateur Rust Fighter
 
brossow's Avatar
 
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
Re: WTB parts for my 4x4 conversion project

I've got a complete dash if you're interested. I can cut it up but it'd likely be easier to replace the whole thing. Pics and info are here:

http://67-72chevytrucks.com/vboard/s...d.php?t=306295

It's long enough that it has to go oversize. Figure 20# and 66x18x18 from 56001 if you want to calculate shipping. Let me know if you're interested.

Brent
__________________
Brent

'72 Chevy SWB stepside - [ Build Thread ]
'79 ChevMC SWB fleetside - [ Build Thread ]
'64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)
brossow is offline   Reply With Quote
Old 09-29-2008, 03:02 AM   #12
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: WTB parts for my 4x4 conversion project

i have the tail gate straps/henges $16.00 shipped to you.
__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 09-30-2008, 11:40 AM   #13
Luvlegs
Registered User
 
Luvlegs's Avatar
 
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
Re: WTB parts for my 4x4 conversion project

I'm not certain if these would be the mounts you are looking for or not...
Attached Images
  
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)

Wear your PPE! You can eat with false teeth but you can't see with a false eye.

1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
Luvlegs is offline   Reply With Quote
Old 09-30-2008, 01:20 PM   #14
67mater
Registered User
 
67mater's Avatar
 
Join Date: Sep 2007
Location: Mundelein, IL
Posts: 862
Re: WTB parts for my 4x4 conversion project

I have front and rear 3/4 ton 4x4 leaves from a 67 chevy. I can take pics, they are surface rusted from plow use. They are heavy so shipping may be high.
__________________
time is inversely proportional to money; that's why it takes me so long

1967 K10
1967 Camaro
67mater is offline   Reply With Quote
Old 09-30-2008, 09:03 PM   #15
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

Luvlegs,those look like the ones I need. Let me know how muck with shipping to 83854
67mater,I only need the rear. Are 67 and 72 3/4 ton springs the same. My truck has a Dana 60,don't know if it makes a difference. I can get sime dimensions if needed.
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 10-01-2008, 10:18 AM   #16
67mater
Registered User
 
67mater's Avatar
 
Join Date: Sep 2007
Location: Mundelein, IL
Posts: 862
Re: WTB parts for my 4x4 conversion project

I don't know on the difference, but perhaps there is, as the 67 had some weird stuff. Mine was on an Eaton but if you get me overal length eye to eye and pin position (or I can do the same) plus width we can compare. Oh, make sure the width at the hanger and at the pin are or aren't the same.
__________________
time is inversely proportional to money; that's why it takes me so long

1967 K10
1967 Camaro
67mater is offline   Reply With Quote
Old 10-01-2008, 10:18 PM   #17
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

67Mater,I will have to get you some dimensions tomorrow and I will have to guestimate the legnth as my springs are off a later model and too long.(stupid POs,I don't even know how he got them installed). Might be able to get dimensions off of the wifes 72 3/4 ton Suburban 4x4,might be the same.
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 10-01-2008, 11:12 PM   #18
bouncytruck
SKINNY TIRES RULE!
 
bouncytruck's Avatar
 
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
Re: WTB parts for my 4x4 conversion project

Check with LIVRAT over here in Seattle. He's converted many Blazer's to 2wd and has a ton of the 4wd stuff left over. One road and you could probably have all you need.
__________________
bouncytruck 1972 K5
The Hauler 1994 K1500 Suburban
The Daily2010 Kia Soul
Wife's Ride2014 Fiat 500L
bouncytruck is offline   Reply With Quote
Old 10-02-2008, 08:20 PM   #19
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

Got the spring dimensions tonight. Springs are 2.5 in wide,frame hole to frame hole is 52 in,front frame hole to pin is 26 in. Checked wifes 72 3/4 ton 4x4 Suburban and all dimensions are the same. Suburban has 5 leaves. If more info is needed please let me know.
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 10-03-2008, 08:09 AM   #20
67mater
Registered User
 
67mater's Avatar
 
Join Date: Sep 2007
Location: Mundelein, IL
Posts: 862
Re: WTB parts for my 4x4 conversion project

ok, I'll make sure mine are the same. I know, however, that my front leaves were only 3 I believe. not sure why your suburban has 5.
__________________
time is inversely proportional to money; that's why it takes me so long

1967 K10
1967 Camaro
67mater is offline   Reply With Quote
Old 10-03-2008, 10:02 PM   #21
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

The 6 leaves are in the rear,these are the ones I need. My 72 GMC 3/4 ton 4x4 also has three leaves in the front,I have the front springs that I need.
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 10-04-2008, 06:11 AM   #22
69rut
Registered User
 
Join Date: Sep 2006
Location: SE Virginia
Posts: 158
Re: WTB parts for my 4x4 conversion project

Looking for SWB trailing arms, can you help?
__________________
trailers are for boats
69rut is offline   Reply With Quote
Old 10-04-2008, 10:48 AM   #23
67mater
Registered User
 
67mater's Avatar
 
Join Date: Sep 2007
Location: Mundelein, IL
Posts: 862
Re: WTB parts for my 4x4 conversion project

shoot, I was thining front springs for some reason. If you want my rears i will sell them (scrap price), but under load one of them is a bit weak. let me know.
__________________
time is inversely proportional to money; that's why it takes me so long

1967 K10
1967 Camaro
67mater is offline   Reply With Quote
Old 10-04-2008, 12:32 PM   #24
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

Do they match the dimensions given in the earlier post? If they do let me know how much you want for them with shipping to 83854. Shipping could be a killer!!!!
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Old 10-05-2008, 08:24 PM   #25
zeusflash
Senior Member
 
zeusflash's Avatar
 
Join Date: Feb 2005
Location: Post Falls,Idaho
Posts: 691
Re: WTB parts for my 4x4 conversion project

Still need the shifter linkage from the steering column to the trans with the frame bracket,the TH400 to NP205 adapter and the NP 205 transfer case input gear for the TH 400.
__________________
'69 3/4 ton 427 CST Pickup
'71 CST Blazer
'72 GMC 3/4 4x4
zeusflash is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com