WTB- 67-8 Top Grill Moulding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 09-29-2008, 04:31 PM

Enough said?

msgross · 09-30-2008, 07:39 PM

you mean the inside area similar to where the parking lamps are on the bottom?

*FormerMember* · 09-30-2008, 07:44 PM

Yep. The top rectangular piece, usually aluminum.

msgross · 09-30-2008, 07:46 PM

let me check my stash... I have some steel one's but might not have the aluminum trim...

*FormerMember* · 09-30-2008, 07:51 PM

Like the one that's missing from the grill in this picture:

**sportsman712000** · 10-01-2008, 08:59 PM

PM sent

*FormerMember* · 10-12-2008, 09:56 PM

bump-badda-bing

*FormerMember* · 11-18-2008, 10:23 AM

TTT

Need to find these pieces before my subscription runs out.

msgross · 11-18-2008, 11:13 AM

I have a steel set...

*FormerMember* · 11-18-2008, 11:25 AM

Quote:

Originally Posted by msgross

I have a steel set...

Thanks, I think I prefer aluminum though.

Might even want both... the ding in the bottom one doesn't make me happy.

**jaros44sr** · 11-18-2008, 11:29 AM

Mine subscrip. just ran out, hope I'm allowed to answer you. What condition are you looking for...the one I have the damage would be covered by the bowtie, free just shipping

*FormerMember* · 11-18-2008, 11:36 AM

Quote:

Originally Posted by jaros44sr

Mine subscrip. just ran out, hope I'm allowed to answer you. What condition are you looking for...the one I have the damage would be covered by the bowtie, free just shipping

You're allowed to answer, just not post in this forum. Which is why I want to find all my parts before my sub expires.

I am interested in something usable. So yours would be perfect, I think. I could also do some metal work, depending on damage.

jorgensensc · 11-18-2008, 03:26 PM

Grendel, are you not going to re-subscribe? Good luck finding your parts, they are hard to come across original. I don't know how well the re-pops fit, but they are sometimes cheaper than a set of decent used ones. Not to mention the last time I bought a set and had them shipped from a very nice board member, they were destroyed when I got them. It wasn't the members fault. He did the best packaging/protecting job I had ever seen. The postal service just decided it would be better to rip the top 8" of the package completely off, and of course that actually tore the metal on the peices. Then they fought me over the insurance and whether or not it was really their fault. Good luck!!
Shawn

**CPNE** · 11-18-2008, 03:38 PM

A trick I learned was to ship trim pieces in PVC pipe

*FormerMember* · 11-18-2008, 03:47 PM

Quote:

Originally Posted by jorgensensc

Grendel, are you not going to re-subscribe? Good luck finding your parts, they are hard to come across original. I don't know how well the re-pops fit, but they are sometimes cheaper than a set of decent used ones. Not to mention the last time I bought a set and had them shipped from a very nice board member, they were destroyed when I got them. It wasn't the members fault. He did the best packaging/protecting job I had ever seen. The postal service just decided it would be better to rip the top 8" of the package completely off, and of course that actually tore the metal on the peices. Then they fought me over the insurance and whether or not it was really their fault. Good luck!!
Shawn

No, I am not. I was banned for 2 days for posting about the 2nd amendment.

Thanks for the info. I think I'll just order them from a vendor.

jorgensensc · 11-18-2008, 04:09 PM

Come on Grendel!! (Insert Peer pressure here). I'm sure you know how I feel about things going on and ammendment rights, etc. But you and I both know that this is Josh's baby and he doesn't want any conflict getting started. I myself have had my hand slapped a couple of times, and if you are anywhere near as passionate as I am about issues (and I suspect you are) then you know we can probably stir up some conflict just by posting our feelings. Besides, you know you want to buy and sell more stuff on here!

It's a cheap thrill (25.00) for all the fun we have on here, and I know you can get the rest of the fun and advice and opinions for free, but wouldn't you feel a little bit better knowing you helped to keep the place alive? Being from up north I'm sure you understand unions better than I do, but it would kinda feel to me like riding the coattails of others for free. You know I love ya ,man!!
Shawn

*FormerMember* · 11-18-2008, 04:14 PM

Quote:

Originally Posted by jorgensensc

Come on Grendel!! (Insert Peer pressure here). I'm sure you know how I feel about things going on and ammendment rights, etc. But you and I both know that this is Josh's baby and he doesn't want any conflict getting started. I myself have had my hand slapped a couple of times, and if you are anywhere near as passionate as I am about issues (and I suspect you are) then you know we can probably stir up some conflict just by posting our feelings. Besides, you know you want to buy and sell more stuff on here!

It's a cheap thrill (25.00) for all the fun we have on here, and I know you can get the rest of the fun and advice and opinions for free, but wouldn't you feel a little bit better knowing you helped to keep the place alive? Being from up north I'm sure you understand unions better than I do, but it would kinda feel to me like riding the coattails of others for free. You know I love ya ,man!!
Shawn

Sorry, I don't respond well to peer pressure

I provide information and trail blaze in some areas. That will have to suffice. If not, I will happily delete my posts and go elsewhere.

***Liz*** · 11-19-2008, 12:38 AM

You broke a rule, and were treated like everyone else. I am really sorry it upsets you enough to go on n on about it in posts. I honestly would try and let it go, it can not be healthy to harbor.

Yes you are a good member, yes you help alot. If you subscribe, thats your choice. If you do not, again your choice.

Much as it was your choice to post a political thread. Even implying you knew it was against the rules, in the said thread.

No one treated you unfairly, or deserves the continued grief in posts about it.

*FormerMember* · 11-19-2008, 12:45 AM

Quote:

Originally Posted by Liz

You broke a rule, and were treated like everyone else. I am really sorry it upsets you enough to go on n on about it in posts. I honestly would try and let it go, it can not be healthy to harbor.

Yes you are a good member, yes you help alot. If you subscribe, thats your choice. If you do not, again your choice.

Much as it was your choice to post a political thread. Even implying you knew it was against the rules, in the said thread.

No one treated you unfairly, or deserves the continued grief in posts about it.

I disagree that I knew about it, or implied that I knew about it. EDIT: before the first post. By then, it was too late to delete, after saying I would delete! I do certainly disagree for banning a user for two days, when a warning would suffice. I also disagree that I am "to go on n on about it in posts"

Am I violating any rules here?

***Liz*** · 11-19-2008, 12:56 AM

Quote:

Originally Posted by grendel

I disagree that I knew about it, or implied that I knew about it.

Quote:

Originally Posted by grendel

http://67-72chevytrucks.com/vboard/s...d.php?t=314733

Quote:

Originally Posted by Shane

How many MORE folks must get banned before they finally start taking the NO POLITICAL POSTS rule seriously?

I understand the no politics rule. I am not for or against either political party.

This is about a right and legislation, not a political party, as both the major parties have their gun grabber and pro gunners. This is about making your voice heard and organizing.

If Josh or Liz feel otherwise, I will be very happy to delete it.

Quote:

Originally Posted by vectorit

Join the NRA. If you already are a member, then donate more money to help them fight for your right.

I am an NRA member.

That in of itself is not enough.

Quote:

Originally Posted by grendel

I I do certainly disagree for banning a user for two days, when a warning would suffice.

Again, I know you do, and am sorry its upsetting you this much. But we discussed this in PM, as did you and Augie.

Quote:

Originally Posted by grendel

I also disagree that I am "to go on n on about it in posts"

Am I violating any rules here?

Sorry but it is continuing on in posts, or we would not be having this convo now

As far as rules, not yet.. but continuing to argue this in the forums would be.

*FormerMember* · 11-19-2008, 01:00 AM

Quote:

Originally Posted by Liz

Again, I know you do, and am sorry its upsetting you this much. But we discussed this in PM, as did you and Augie.

Sorry but it is continuing on in posts, or we would not be having this convo now

As far as rules, not yet.. but continuing to argue this in the forums would be.

Then I shant argue. I answered why I was looking for parts before my subscription expired and why I don't respond well to peer pressure.

Enough said there.

Quote:

Originally Posted by Shane

I have both the upper and lower in aluminum in driver condition. What are you willing to give?

And now back on topic:
Pics?

*Shane* · 11-19-2008, 12:54 AM

I have both the upper and lower in aluminum in driver condition. What are you willing to give?

*Shane* · 11-19-2008, 01:06 AM

I will be glad to take some pics for you, but the soonest I can get them would be this weekend, probably Sunday.

Is that ok? I understand if you don't wish to wait that long.

*Shane* · 11-19-2008, 01:12 AM

Doh! I did not.

I'll get you some pics this weekend.

*FormerMember* · 11-19-2008, 01:14 AM

Quote:

Originally Posted by Shane

Doh! I did not.

I'll get you some pics this weekend.

Sounds like a plan.

09-29-2008, 04:31 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	WTB- 67-8 Top Grill Moulding Enough said?

09-30-2008, 07:39 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB- 67-8 Top Grill Moulding you mean the inside area similar to where the parking lamps are on the bottom? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-30-2008, 07:44 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: WTB- 67-8 Top Grill Moulding Yep. The top rectangular piece, usually aluminum.

09-30-2008, 07:46 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB- 67-8 Top Grill Moulding let me check my stash... I have some steel one's but might not have the aluminum trim... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-30-2008, 07:51 PM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: WTB- 67-8 Top Grill Moulding Like the one that's missing from the grill in this picture:

10-01-2008, 08:59 PM	#6
sportsman712000 Registered User Join Date: Aug 2008 Location: Hazel Green AL Posts: 27	Re: WTB- 67-8 Top Grill Moulding PM sent

10-12-2008, 09:56 PM	#7
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: WTB- 67-8 Top Grill Moulding bump-badda-bing

11-18-2008, 10:23 AM	#8
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: WTB- 67-8 Top Grill Moulding TTT Need to find these pieces before my subscription runs out.

11-18-2008, 11:13 AM	#9
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB- 67-8 Top Grill Moulding I have a steel set... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-18-2008, 11:29 AM	#11
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,590	Re: WTB- 67-8 Top Grill Moulding Mine subscrip. just ran out, hope I'm allowed to answer you. What condition are you looking for...the one I have the damage would be covered by the bowtie, free just shipping __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-18-2008, 03:26 PM	#13
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB- 67-8 Top Grill Moulding Grendel, are you not going to re-subscribe? Good luck finding your parts, they are hard to come across original. I don't know how well the re-pops fit, but they are sometimes cheaper than a set of decent used ones. Not to mention the last time I bought a set and had them shipped from a very nice board member, they were destroyed when I got them. It wasn't the members fault. He did the best packaging/protecting job I had ever seen. The postal service just decided it would be better to rip the top 8" of the package completely off, and of course that actually tore the metal on the peices. Then they fought me over the insurance and whether or not it was really their fault. Good luck!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-18-2008, 03:38 PM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: WTB- 67-8 Top Grill Moulding A trick I learned was to ship trim pieces in PVC pipe __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-18-2008, 04:09 PM	#16
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB- 67-8 Top Grill Moulding Come on Grendel!! (Insert Peer pressure here). I'm sure you know how I feel about things going on and ammendment rights, etc. But you and I both know that this is Josh's baby and he doesn't want any conflict getting started. I myself have had my hand slapped a couple of times, and if you are anywhere near as passionate as I am about issues (and I suspect you are) then you know we can probably stir up some conflict just by posting our feelings. Besides, you know you want to buy and sell more stuff on here! It's a cheap thrill (25.00) for all the fun we have on here, and I know you can get the rest of the fun and advice and opinions for free, but wouldn't you feel a little bit better knowing you helped to keep the place alive? Being from up north I'm sure you understand unions better than I do, but it would kinda feel to me like riding the coattails of others for free. You know I love ya ,man!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-19-2008, 12:38 AM	#18
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,757	Re: WTB- 67-8 Top Grill Moulding You broke a rule, and were treated like everyone else. I am really sorry it upsets you enough to go on n on about it in posts. I honestly would try and let it go, it can not be healthy to harbor. Yes you are a good member, yes you help alot. If you subscribe, thats your choice. If you do not, again your choice. Much as it was your choice to post a political thread. Even implying you knew it was against the rules, in the said thread. No one treated you unfairly, or deserves the continued grief in posts about it.

11-19-2008, 12:54 AM	#22
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: WTB- 67-8 Top Grill Moulding I have both the upper and lower in aluminum in driver condition. What are you willing to give?



Register or Log In To remove these advertisements.

11-19-2008, 01:06 AM	#23
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: WTB- 67-8 Top Grill Moulding I will be glad to take some pics for you, but the soonest I can get them would be this weekend, probably Sunday. Is that ok? I understand if you don't wish to wait that long.

11-19-2008, 01:12 AM	#24
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: WTB- 67-8 Top Grill Moulding Doh! I did not. I'll get you some pics this weekend.

Register or Log In To remove these advertisements.