Bucket seat floor support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972CST · 10-09-2008, 04:57 AM

Anybody need a factory bucket seat floor support? Getting ready to haul off a parts blazer and I wasnt sure if its worth my time to cut it out? $50 plus ship.

**70cst** · 10-09-2008, 06:24 AM

I would think eventually you would have a buyer for this part. I don't think these are being sold by aftermarket vendors. JMHO

**special-K** · 10-09-2008, 07:07 AM

Cut it out.I`d buy it,but bad timing.I`m sure someone will take it if it`s not rusty.

**Gary 70 Jimmy** · 10-09-2008, 08:46 AM

Are the costom bucket seat floor supports differant from the utility buckets seats floor supports.

1972CST · 10-09-2008, 09:17 AM

Sorry about the confusion, this support is on the underside of the floor and adds support to the are of the floor where the front of the bucket seats bolt down. I will get a pic if possible- the tub is off the frame and sitting an a trailer. I will have to lift it up to get a pic but I will.

1972CST · 10-09-2008, 12:03 PM

Quote:

Originally Posted by Gary 70 Jimmy

Are the costom bucket seat floor supports differant from the utility buckets seats floor supports.

My guess is that they are all the same, just the seats are different.

69step4x4 · 10-09-2008, 01:22 PM

How much shipped to 97402 ? very interested

**GSFMECH** · 10-09-2008, 03:12 PM

I just put one of these in my truck to mount my buckets, it's worth saving this brace and also all of the nut plates that are welded to the bottom of the floor pan. The bench seats mount in a different location.

71HUGGER396 · 10-09-2008, 04:14 PM

Please put me in line for this, pending pics. Very interested. I'm going to be away for the weekend. Will not be near a computer until Monday night. As long as it is not rusted I'll take it if it gets to me. Shipping will be to 16055 Thank you

1972CST · 10-09-2008, 08:26 PM

Sorry guys, didnt get to get any pics. It has rained here all afternoon. Sat. will be my next chance to get over there and do anything.

(1st in line) 69step4x4- I can have this to your door for $75 total.

(2nd in line) 71HUGGER396- To your door for $70 if 69step4x4 backs out.

1972CST · 10-11-2008, 12:26 PM

Here are a few pics. It looks like this truck was undercoated, some surface rust but very solid.

10-09-2008, 04:57 AM	#1
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Bucket seat floor support Anybody need a factory bucket seat floor support? Getting ready to haul off a parts blazer and I wasnt sure if its worth my time to cut it out? $50 plus ship.

10-09-2008, 06:24 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Bucket seat floor support I would think eventually you would have a buyer for this part. I don't think these are being sold by aftermarket vendors. JMHO __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-09-2008, 07:07 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Bucket seat floor support Cut it out.I`d buy it,but bad timing.I`m sure someone will take it if it`s not rusty. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-09-2008, 08:46 AM	#4
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Bucket seat floor support Are the costom bucket seat floor supports differant from the utility buckets seats floor supports.

10-09-2008, 09:17 AM	#5
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Sorry about the confusion, this support is on the underside of the floor and adds support to the are of the floor where the front of the bucket seats bolt down. I will get a pic if possible- the tub is off the frame and sitting an a trailer. I will have to lift it up to get a pic but I will.

10-09-2008, 01:22 PM	#7
69step4x4 Registered User Join Date: Feb 2007 Location: Cottage Grove, Or Posts: 312	Re: Bucket seat floor support How much shipped to 97402 ? very interested __________________ Lowered 2002 PT Cruiser ONLY for mileage. 1969 Stepside 4x4 ( under construction )

10-09-2008, 03:12 PM	#8
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: Bucket seat floor support I just put one of these in my truck to mount my buckets, it's worth saving this brace and also all of the nut plates that are welded to the bottom of the floor pan. The bench seats mount in a different location. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

10-09-2008, 04:14 PM	#9
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Re: Bucket seat floor support Please put me in line for this, pending pics. Very interested. I'm going to be away for the weekend. Will not be near a computer until Monday night. As long as it is not rusted I'll take it if it gets to me. Shipping will be to 16055 Thank you __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin" Last edited by 71HUGGER396; 10-09-2008 at 04:16 PM. Reason: add info

10-09-2008, 08:26 PM	#10
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Sorry guys, didnt get to get any pics. It has rained here all afternoon. Sat. will be my next chance to get over there and do anything. (1st in line) 69step4x4- I can have this to your door for $75 total. (2nd in line) 71HUGGER396- To your door for $70 if 69step4x4 backs out. Last edited by 1972CST; 10-09-2008 at 08:36 PM.

10-11-2008, 12:26 PM	#11
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Here are a few pics. It looks like this truck was undercoated, some surface rust but very solid. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.