WIW best of best

[Robert Paul Thomas]

67 SWB chev from arkansas, wood bed, small window. Frame blasted, epoxied, painted semi gloss black. ECE 5/6 drop kit, super trackbar, shock relocation, crossmember, rear crossmember, stainless gas tank, trans mount, front disk brake kit. 98 LS1 with 46k/ T-56 sixspeed. S&P headers, Air filter/MAF, speedo modification from DSS to cable, and engine mounts. Mcleod shifter relocation kit with hurst shifter. Dennys alum driveshaft,SLP flywheel, centerforce pressure plate/ clutch, GM hydrolic clutch, and bushing. New bearing and seals in trans. In line tube stainless hard lines, flex lines and cables. Russell gas lines/ S&P fuel filter/ GM hi vol electric pump. Moog upper and lower ball joints, inner and outer tie rods, upper and lower shaft kits. New drums, raybestos pads, wheel cyl, combi kits. New eaton posi/ 373 gears, timken bearings, seals, moser axles 5/5. New good year 255, 275 17 tires on new torque thurst II 17 inch. All ass with gold cad/ nylock bolts.2 1/2 magnaflow custom tig welded stainless exhaust.
The following list is NOS GM, not repop l/r fenders, l/r inner fenders, grill, grill inserts, 2 sets grill hoops, 2 sets headlight bezels, gravel pan, hood latch, hood latch catch, parking lamps/ 2 sets of lenses, 2 sets chevrolet hood emblems, hood bumpers, hood hinges, firewall wiring harness, rad support, front bumper brackets, front frame bumper brackets, drive and 2 pass wiper trans, wiper motor, dash bezel, a/c control/switch, ingition switch/bezel/cylinders/keys, wiper switch, headlight switch, amp guage, gas guage, temp guage, tach, ash tray, lighter, glovebox light, spid label, glovebox bumpers, windshield weatherstrip w/stainless trim, back glass, door seals, inner and outer felts, vent window seals, vent window handles, door opener trans, latches, catches, 71/72 mirrors, gasket and bases, 2 sets door custom script, 3 C-10 emblems, grill bowtie, door sills, inner box tubs, tailgate, tailgate handle, tailgate trunions, tailgate latches, rear bumper brackets, filler panels, license plate lamp/ bracket, front and rear bumpers, 4 tailight housings, lenses, backup housings, lenses, tailgate rubbers, tailgate links, 2 sets rockers, batterybox, upper and lower 4 row core rad mounts, washer container, arm rests, heater vents, 4 speed boot and ring
Also 2 Speed warning speedos, extra temp, amp , gas guages mint inner fenders, rad support, taigate, grill, hood, 2 rock pans. Cab need rockers and cab corners, goodmark cowl induction hood. Buddy bucket seats, new foam, best set of black lap belts/ retracters you'll find, 3 sets black sunvisors. Vac/ tach/ speedwarning dash.high hump/ no hole yet, custom, horn button, 4 speed tilt cluumn, tinted glass
I'm sure I forgot lots, every thing I have NOS, I have from the original truck in good shape,...best offer!

[Robert Paul Thomas]

Also, I forgot I have almost 2 sets of NOS body trim

[olblue60@aol.com]

what is it that you are selling. NOS parts, or all as a package deal? How much are you asking? Thanks

[72BlckButy]

Any pics?

[jorgensensc]

I would be interested in these pending pics and prices shipped to 77018:
1 set grill hoops
71/72 mirrors, gasket and bases
new foam (if it isn't installed on the buddy buckets)
Shawn

[Robert Paul Thomas]

Hi guys. Selling the whole lot, won't split up. I do have some pics if you tell me how to upload. Going through some marital issues, and still not resolved. I will try to keep you guys up to speed, as soon as I can
Thanks

[jorgensensc]

If you decide to part those parts I asked for (mainly the extra set of grill hoops and the mirrors, I don't really need the foam) then let me know.
Shawn

[72BlckButy]

Try some of these threads on posting pics:

How to Attach pictures to your post...

How to post pictures on this site... (this is what I use)

How to post pictures, step by step instructions, using BB code...

[Shane]

Post prices. Best Offer is not a price and there are rules against auctions. Just a heads up.

[fine69]

All parts must have prices per board rules.

Please change it.

[special-K]

Looks like a WIW thread.I moved it to where it belongs.

When you do decide to sell,it will need to have a price on the lot.

I`d give my best estimate,but would like more info and,yes,pictures would help.You will get less as a packege than selling the truck and parts seperately.I`d at least sell the truck seperate from the parts as alot.But,selling parts seperately would bring the most money.Good parts ell themselves.It`s not that much effort.

[Robert Paul Thomas]

Sorry, guys, first time seller. I did know of the price part, that is why I thought I could post under WIW. I also have two sets of NOS outer door handles, inner door handles, and window cranks, center A/C vent, not sure what else. I will post pics tomorrow. almost 30,000 invested looking for 20,000

[streetstar]

is this an assembled , painted and running truck with a trailer full of parts to go with it? or is it a rolling chassis and a trailer full of parts?

Sounds like a lot of good stuff -- i would guess 20k if the truck was assembled and ready to go with presentable paint.

If its not, then it sounds like a high dollar basket case and i have no idea how to price something like that

[Robert Paul Thomas]

I have to agree with street star, but honestly, I have closer to 40 in this truck. Chassis is a roller finished, rest is in parts. Some on=ther stuff I forgot ECE front sway bar, ECE close ratio steeringbox, NOS window reg, 5 clutch/brake pads, with the stainless trim, gas pedal with ss trim studs, door lock knobs,.....

[fine69]

Pics would do this thread wonders.

[Hart_Rod]

Email me the pics at robhartley@aol.com and I will size and post them for you.

R