Bigger stuff, NO SHIPPING - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-11-2008, 12:15 PM

NO SHIPPING, I'm just trying to clean up a bit before winter hits.
67 power assist setup $20-SOLD
mostly driver 69-72 chevy fenders $10
one pass $20
bumpers $10
pass door $30

teeitup · 10-11-2008, 12:16 PM

Nice grill guard $100
pretty nice gate, very slight bend, no rust, a couple small dings, came from Nevada $200
rear sections of bed, $20 for pair

teeitup · 10-11-2008, 12:17 PM

two LWB drivers bed sides, some dings but no rust $40 each-SOLD
front bed panel $10
left 71-72 grill pretty good $50
other 2 have some dings $20 each
AC cab, no title, some rust but not bad $50

teeitup · 10-11-2008, 12:17 PM

white 72 AC cab, some rust but not bad, no vin or title $50

**too much stuff** · 10-11-2008, 02:55 PM

Randy, could you store the power assist for awhile? I will take it if you can. If you need it gone asap, i will have to pass.

chipflyer · 10-11-2008, 09:39 PM

Randy, I am interested in the left bedside. I'll try to get up and look at it.

Jeff

msgross · 10-11-2008, 09:42 PM

OMG, $50 for a cab?

wish I was out in KS... I would being them all back east...

ttt for you...

420am · 10-11-2008, 09:44 PM

I'm interested in both bedsides if they make it to me.

hounddogs! · 10-11-2008, 10:00 PM

Put me down for the front bed panel if it's straight. In line for the bed sides after 420am.

tcb-1 · 10-11-2008, 10:30 PM

Randy,
Don't think I've ever seen a grille guard like that. Interesting. Were they a dealer installed option?

ttt for ya....

Jtrux · 10-11-2008, 11:02 PM

Will you ship a cab??

Sorry I just had too.

teeitup · 10-11-2008, 11:08 PM

Eric, sure I can hold it for you
Jeff, come on up, I have a golf tourney in morning but should be aorund after that
msgross, Mike, I'm just trying to clean up a bit, things are slow around here
420am, Chipflyer is first on one of them then you
Hounddogs!, you would third in line on bedsides, front panel is yours if you want it, it has a few dents and a slight bow
TCB-1, Doug, yes dealer add on, company out of Texas. I bought it from JC out east and was going to put it on my 72 but things have changed around here so I'm selling it
Jtrux, someone always has to ask

Thanks Randy

teeitup · 10-12-2008, 08:45 PM

Chipflyer passed on the bedside so everything is still for sale. Thanks Randy

420am · 10-13-2008, 01:10 AM

Randy, do you have additional photos of the bedsides? I'm definitely interested in them. Are you coming to KC anytime soon? I'd spring for some of your gas money if so. My '72 (my other ride is a Cobalt coupe..

) would cost a buttload of money to drive to Topeka. I'm patient and can pay up front if you have a trip planned for later.

teeitup · 10-13-2008, 07:21 AM

I can get some pics after work today. No plans on coming to KC and the only trucks I have is my 67 and 72 and they don't venture very far from home, sorry. Thanks Randy

420am · 10-13-2008, 12:29 PM

Sounds good. I'll find a way up there for them. I'll take the bed sides pending pics.

72BlckButy · 10-13-2008, 12:44 PM

Hey Randy... any '72 SWB frames? (great shape if at all possible)

What kind of rust is on the white '72 cab?

teeitup · 10-13-2008, 05:44 PM

420am, I'll get pics here in awhile, I have to go get my kids right now.
72blckbuty, Mate, cab is alright but it needs rockers, corners and I think 2 mounts, floors have just a little rust. I usually don't take them off if I didn't think it would be worth fixing, its way better than most around here. Sorry I had 2 swb frames here but sold them both,
Thanks Randy

teeitup · 10-13-2008, 07:22 PM

Here are some pic 420am, no rust, the blue has a dent in rear quarter see pic, the green one also has a dent in rear quarter and lower rear quarter. The green one inner lip is dented up a little, but could be straightened. Thanks let me know, Randy

teeitup · 10-13-2008, 07:23 PM

more

teeitup · 10-13-2008, 07:24 PM

last

**Dieselwrencher** · 10-13-2008, 10:15 PM

PM sent about green cab and 72 grill

420am · 10-14-2008, 12:08 AM

Randy, I think those will work out good for me. I really just want to use them for patch panels where my bed is rusted out on the inside of my bed sides and a few sections of bed rail. Let me know if you want payment up front or just 1/2 or something to hold them until I get up there. I'd rather take a look at them first but if I need to pay up front to secure them I will.

teeitup · 10-14-2008, 07:25 AM

Dieselwrencher, pm'd you back
420am, sure I'll hold them for you till you look at them in person
Power assist setup is sold to TooMuchStuff, Thanks Eric, Randy

teeitup · 10-14-2008, 05:20 PM

pics of cabs

10-11-2008, 12:15 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Bigger stuff, NO SHIPPING NO SHIPPING, I'm just trying to clean up a bit before winter hits. 67 power assist setup $20-SOLD mostly driver 69-72 chevy fenders $10 one pass $20 bumpers $10 pass door $30 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 10-14-2008 at 07:26 AM.

10-11-2008, 12:16 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING Nice grill guard $100 pretty nice gate, very slight bend, no rust, a couple small dings, came from Nevada $200 rear sections of bed, $20 for pair Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 10-11-2008 at 12:20 PM.

10-11-2008, 12:17 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING two LWB drivers bed sides, some dings but no rust $40 each-SOLD front bed panel $10 left 71-72 grill pretty good $50 other 2 have some dings $20 each AC cab, no title, some rust but not bad $50 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 10-14-2008 at 07:26 AM.

10-11-2008, 12:17 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING white 72 AC cab, some rust but not bad, no vin or title $50 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-11-2008, 02:55 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Bigger stuff, NO SHIPPING Randy, could you store the power assist for awhile? I will take it if you can. If you need it gone asap, i will have to pass. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-11-2008, 09:39 PM	#6
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Bigger stuff, NO SHIPPING Randy, I am interested in the left bedside. I'll try to get up and look at it. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

10-11-2008, 09:42 PM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Bigger stuff, NO SHIPPING OMG, $50 for a cab? wish I was out in KS... I would being them all back east... ttt for you... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 10-11-2008 at 09:42 PM.

10-11-2008, 09:44 PM	#8
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Bigger stuff, NO SHIPPING I'm interested in both bedsides if they make it to me. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

10-11-2008, 10:00 PM	#9
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 887	Re: Bigger stuff, NO SHIPPING Put me down for the front bed panel if it's straight. In line for the bed sides after 420am. __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

10-11-2008, 10:30 PM	#10
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Bigger stuff, NO SHIPPING Randy, Don't think I've ever seen a grille guard like that. Interesting. Were they a dealer installed option? ttt for ya.... __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

10-11-2008, 11:02 PM	#11
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Bigger stuff, NO SHIPPING Will you ship a cab?? Sorry I just had too. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

10-11-2008, 11:08 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING Eric, sure I can hold it for you Jeff, come on up, I have a golf tourney in morning but should be aorund after that msgross, Mike, I'm just trying to clean up a bit, things are slow around here 420am, Chipflyer is first on one of them then you Hounddogs!, you would third in line on bedsides, front panel is yours if you want it, it has a few dents and a slight bow TCB-1, Doug, yes dealer add on, company out of Texas. I bought it from JC out east and was going to put it on my 72 but things have changed around here so I'm selling it Jtrux, someone always has to ask Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-12-2008, 08:45 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING Chipflyer passed on the bedside so everything is still for sale. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-13-2008, 01:10 AM	#14
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Bigger stuff, NO SHIPPING Randy, do you have additional photos of the bedsides? I'm definitely interested in them. Are you coming to KC anytime soon? I'd spring for some of your gas money if so. My '72 (my other ride is a Cobalt coupe.. ) would cost a buttload of money to drive to Topeka. I'm patient and can pay up front if you have a trip planned for later. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday) Last edited by 420am; 10-13-2008 at 01:11 AM.

10-13-2008, 07:21 AM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING I can get some pics after work today. No plans on coming to KC and the only trucks I have is my 67 and 72 and they don't venture very far from home, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

10-13-2008, 12:29 PM	#16
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Bigger stuff, NO SHIPPING Sounds good. I'll find a way up there for them. I'll take the bed sides pending pics. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

10-13-2008, 12:44 PM	#17
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Bigger stuff, NO SHIPPING Hey Randy... any '72 SWB frames? (great shape if at all possible) What kind of rust is on the white '72 cab? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 10-13-2008 at 12:45 PM.

10-13-2008, 05:44 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING 420am, I'll get pics here in awhile, I have to go get my kids right now. 72blckbuty, Mate, cab is alright but it needs rockers, corners and I think 2 mounts, floors have just a little rust. I usually don't take them off if I didn't think it would be worth fixing, its way better than most around here. Sorry I had 2 swb frames here but sold them both, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 10-13-2008 at 07:25 PM.

10-13-2008, 07:22 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING Here are some pic 420am, no rust, the blue has a dent in rear quarter see pic, the green one also has a dent in rear quarter and lower rear quarter. The green one inner lip is dented up a little, but could be straightened. Thanks let me know, Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-13-2008, 07:23 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-13-2008, 07:24 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING last Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-13-2008, 10:15 PM	#22
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Bigger stuff, NO SHIPPING PM sent about green cab and 72 grill

10-14-2008, 12:08 AM	#23
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Bigger stuff, NO SHIPPING Randy, I think those will work out good for me. I really just want to use them for patch panels where my bed is rusted out on the inside of my bed sides and a few sections of bed rail. Let me know if you want payment up front or just 1/2 or something to hold them until I get up there. I'd rather take a look at them first but if I need to pay up front to secure them I will. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

10-14-2008, 07:25 AM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING Dieselwrencher, pm'd you back 420am, sure I'll hold them for you till you look at them in person Power assist setup is sold to TooMuchStuff, Thanks Eric, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-14-2008, 05:20 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Bigger stuff, NO SHIPPING pics of cabs Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.