question about shorty headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The Big Green · 10-15-2008, 10:31 AM

I have a '67 chevy 1/2 ton 2wd. I need a good shorty, or mid-length header. I priced 2 headers, both ceramic coated. First, Hedman, $450. Second, Flowtech, $350. Whats a good brand? Hedman have some good headers, but $450?

primered_junk · 10-15-2008, 10:42 AM

I have used flow techs on many occasions I have a set on my 70 stepper since 1995, never even had to put gaskets on them. Just start with the middle bolts and work outward. Most flange warping on headers is caused by improper tightening upon installation. Get it hot and the re-tighten all the bolts once again from the center out. They will be trouble free for years to come.

10-15-2008, 10:31 AM	#1
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,304	question about shorty headers I have a '67 chevy 1/2 ton 2wd. I need a good shorty, or mid-length header. I priced 2 headers, both ceramic coated. First, Hedman, $450. Second, Flowtech, $350. Whats a good brand? Hedman have some good headers, but $450?

10-15-2008, 10:42 AM	#2
primered_junk ASE master tech/machinist Join Date: May 2008 Location: Blue Mound Texas Posts: 303	Re: question about shorty headers I have used flow techs on many occasions I have a set on my 70 stepper since 1995, never even had to put gaskets on them. Just start with the middle bolts and work outward. Most flange warping on headers is caused by improper tightening upon installation. Get it hot and the re-tighten all the bolts once again from the center out. They will be trouble free for years to come. __________________ "I sit here and I pray in my broken down Chevrolet....."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.