FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Bowties** · 10-17-2008, 04:48 PM

Complete matched setup pulled out of a recently parted 67, ignition switch and door locks are in good working order. Setup includes two matched keys, ignition lock cylinder, ignition switch spacer, ignition switch nut, ignition switch and both door locks w/pawls & retaining clips. $35... shipped lwr. 48/payment by paypal, check or money order.

4bynut · 10-17-2008, 09:56 PM

Do you have the keys for the door locks? Also is they're any pitting? Thanks, Jason

**leddzepp** · 10-17-2008, 10:02 PM

The ignition key and the lock keys are the same, that is why it is a matched setup

4bynut · 10-17-2008, 11:15 PM

OK, thanks leddzepp. Then if their not pitted i'll take them. LMK. Jason

**Classic Bowties** · 10-18-2008, 05:29 PM

Quote:

Originally Posted by 4bynut

OK, thanks leddzepp. Then if their not pitted i'll take them. LMK. Jason

4bynut, as leddzepp said these are a matched set in that the ignition key also fits both door locks. I had thought my pics were fairly detailed, but here are a couple more, these are 40 year old used parts (= the $30. price) in good working "driver" condition. If you are after a show or freshly painted & new dash look I could include the pictured brand new chrome ign. switch nut for $10. more. Also are you wanting a true 67/8 ignition switch with NO accessory position on the switch or would you rather have the 69-72 type switch with acc. position?

For wiw: I recently had a local locksmith cut a key for a cab & door set that I had sold and then misplaced the originals, and I was charged $25. for the first key and $2. more for a copy = $27. for just 2 keys.

**Classic Bowties** · 10-20-2008, 04:30 PM

Quote:

Originally Posted by 4bynut

OK, thanks leddzepp. Then if their not pitted i'll take them. LMK. Jason

4bynut, couple of pm's sent with info... Lmk

CCCC · 10-18-2008, 12:12 AM

If these will fit through '72, I will take the set if it is still available. If this is a "go", please PM me so we can make the payment arrangements.

Thanks, CCCC

**Classic Bowties** · 10-18-2008, 05:58 PM

Quote:

Originally Posted by CCCC

If these will fit through '72, I will take the set if it is still available. If this is a "go", please PM me so we can make the payment arrangements.

Thanks, CCCC

CCCC, that above pictured ignition spacer and retaining nut are for a 67 only and that setup may be sold to 4bnut, but I do have this 69-72 matched setup with a brand new set of keys available. I would let this setup go for $45. shipped, cost increase is due to spending $27. (see above post) for the pair of new keys on this setup. Lmk,

CCCC · 10-19-2008, 12:17 PM

Thanks Classic Bowties. Consider the pictured ign switch/door lock components for 69-72, with keys, sold at $45 including shipping to 87829. Am mailing a check for $45 to you at your address given in PM. I will trust you to mail the parts to my PO Box after you cash the check and have $$ in hand.
CCCC

daves71k5 · 10-19-2008, 03:53 PM

If the 67 setup is still available, please let me know. P.M. me with payment info if they are. Dave

**Classic Bowties** · 10-20-2008, 04:38 PM

Quote:

Originally Posted by daves71k5

If the 67 setup is still available, please let me know. P.M. me with payment info if they are. Dave

Hey Dave, giving 4bynut a little more time to get it worked out on his end. I will keep you informed if they are available yet. I do have another 67 ignition switch with retaining nut, spacer and 1 key and if thats all you need I would let it go for $20. shipped. Mel

**Classic Bowties** · 10-23-2008, 06:35 AM

Quote:

Originally Posted by daves71k5

If the 67 setup is still available, please let me know.

Dave, the pictured 67 setup has been sold/shipped to 4bynut.

**Classic Bowties** · 10-20-2008, 04:33 PM

Quote:

Originally Posted by CCCC

Thanks Classic Bowties. Consider the pictured ign switch/door lock components for 69-72, with keys, sold at $45 including shipping to 87829. Am mailing a check for $45 to you at your address given in PM. I will trust you to mail the parts to my PO Box after you cash the check and have $$ in hand.
CCCC

CCCC, they are yours & once your check is here & cleared you have nothing to worry about, I am not going anywhere.

qksilver · 10-25-2008, 09:38 PM

If you still have the 67 ign bezel nut? I will buy it.I don't check here much but my email is SCJKOVACH@AOL.COM
I can pay pal with out a problem
Thanks,
Steve

10-17-2008, 04:48 PM	#1
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,732	FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon Complete matched setup pulled out of a recently parted 67, ignition switch and door locks are in good working order. Setup includes two matched keys, ignition lock cylinder, ignition switch spacer, ignition switch nut, ignition switch and both door locks w/pawls & retaining clips. $35... shipped lwr. 48/payment by paypal, check or money order. Attached Images

10-17-2008, 09:56 PM	#2
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon Do you have the keys for the door locks? Also is they're any pitting? Thanks, Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project) Last edited by 4bynut; 10-17-2008 at 09:59 PM.

10-17-2008, 10:02 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon The ignition key and the lock keys are the same, that is why it is a matched setup Last edited by leddzepp; 10-17-2008 at 10:03 PM.

10-17-2008, 11:15 PM	#4
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon OK, thanks leddzepp. Then if their not pitted i'll take them. LMK. Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

10-18-2008, 12:12 AM	#7
CCCC Registered User Join Date: Mar 2007 Location: San Pedro River, SE Arizona Posts: 734	Re: FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon If these will fit through '72, I will take the set if it is still available. If this is a "go", please PM me so we can make the payment arrangements. Thanks, CCCC __________________ CCCC 67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison Moved but still in the family 70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350 Recently sent to new homes 72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp

10-19-2008, 12:17 PM	#9
CCCC Registered User Join Date: Mar 2007 Location: San Pedro River, SE Arizona Posts: 734	Re: FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon Thanks Classic Bowties. Consider the pictured ign switch/door lock components for 69-72, with keys, sold at $45 including shipping to 87829. Am mailing a check for $45 to you at your address given in PM. I will trust you to mail the parts to my PO Box after you cash the check and have $$ in hand. CCCC __________________ CCCC 67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison Moved but still in the family 70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350 Recently sent to new homes 72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp

10-19-2008, 03:53 PM	#10
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon If the 67 setup is still available, please let me know. P.M. me with payment info if they are. Dave

10-25-2008, 09:38 PM	#14
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: FS: 67 Ignition Retaining Nut/Spacer/Lock Set - Oregon If you still have the 67 ign bezel nut? I will buy it.I don't check here much but my email is SCJKOVACH@AOL.COM I can pay pal with out a problem Thanks, Steve



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.