Some Parts I have For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 10-22-2008, 01:08 PM

I have a few parts for sale that I won't use on the blazer. These items are for sale on the Tennessee Classic Truck Board also. I messed up already but I'll do my best to post if anything is sold there first. Respond only in this thread only, none of that behind the back PMing crap.

67/68 Turn Signal Assemblies w/Clear Lenses
These have been sandblasted and coated with Chassis Black - $35 plus shipping SOLD

Tail Light Assemblies with Gaskets and Stainless Screws
These have been sandblasted and coated with Chassis Black - $25 plus shipping

67-72 Door Latches and Bear Claws w/ new screw kit
These have been sandblasted and coated with a Cast Iron coating
They came off of a low mileage truck. I bought them from Tim Christian and he said they came off a truck with 60K original miles. - $40 plus shipping

Tailgate Kit, I can't seem to find the other bottom side.
All of this has been sandblasted
I do have the rods to go with it if you want it. Will make shipping a little more though. - $30 plus shipping

Radio Delete w/clips- $25 plus shipping SOLD

New Backup Lenses and Gaskets - $15 plus shipping

MotorSeven · 10-22-2008, 04:30 PM

Bryan,
I'll take the radio delete...pm sent

Rd

msgross · 10-22-2008, 05:07 PM

Interested in the signals.. and latches.

what's included..

5150 · 10-22-2008, 05:27 PM

msgross,

The front turn signal assemblies are gone. Sorry, backyard88 took them. I put them on the Tennessee Classic Truck Board also. I told him to post on here and say he'd take them to avoid confusion. Sorry, especially after I made the comment about the PM's behind other buyers backs. I know it's not a constellation but he said he'd take them at 1:45pm.

The latches come with everything in the picture. I do have one of the backing plates that go behind the claw in the cab.

msgross · 10-22-2008, 06:56 PM

well, that sucks then...

let me check my other latches to see how good they are...

after the no PM comment I would follow up with a "for sale locally" comment then... no biggie though

DREAMS OF A 67 · 10-22-2008, 08:30 PM

Hey Bryan, I'll take the latches,if he passes.

BACKYARD88 · 10-23-2008, 10:24 AM

Sorry it took me a while to get over here. I posted over there about the signals before I seen the one here. There's a lot more posts to go through here

5150 · 10-24-2008, 10:45 AM

Joe, I'll give msgross another day to respond if he wants them or not.

msgross · 10-24-2008, 11:20 AM

my computer was down last night... go ahead and move them on to the next guy...

thanks

5150 · 10-24-2008, 12:42 PM

no problem, thanks for the reply

Joe they're yours. Are you coming to Luv's cookout next weekend??

DREAMS OF A 67 · 10-24-2008, 05:56 PM

No, I'm sorry but I cant make it. If you could add shipping to 37918 I will send a postal money order! THANKS

10-22-2008, 01:08 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Some Parts I have For Sale I have a few parts for sale that I won't use on the blazer. These items are for sale on the Tennessee Classic Truck Board also. I messed up already but I'll do my best to post if anything is sold there first. Respond only in this thread only, none of that behind the back PMing crap. 67/68 Turn Signal Assemblies w/Clear Lenses These have been sandblasted and coated with Chassis Black - $35 plus shipping SOLD Tail Light Assemblies with Gaskets and Stainless Screws These have been sandblasted and coated with Chassis Black - $25 plus shipping 67-72 Door Latches and Bear Claws w/ new screw kit These have been sandblasted and coated with a Cast Iron coating They came off of a low mileage truck. I bought them from Tim Christian and he said they came off a truck with 60K original miles. - $40 plus shipping Tailgate Kit, I can't seem to find the other bottom side. All of this has been sandblasted I do have the rods to go with it if you want it. Will make shipping a little more though. - $30 plus shipping Radio Delete w/clips- $25 plus shipping SOLD New Backup Lenses and Gaskets - $15 plus shipping __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 10-24-2008 at 10:42 AM.

10-22-2008, 04:30 PM	#2
MotorSeven Restoration Desperation Join Date: Aug 2006 Location: Tennessee Posts: 373	Re: Some Parts I have For Sale Bryan, I'll take the radio delete...pm sent Rd

10-22-2008, 05:07 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Some Parts I have For Sale Interested in the signals.. and latches. what's included.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 10-22-2008 at 05:09 PM.

10-22-2008, 05:27 PM	#4
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Some Parts I have For Sale msgross, The front turn signal assemblies are gone. Sorry, backyard88 took them. I put them on the Tennessee Classic Truck Board also. I told him to post on here and say he'd take them to avoid confusion. Sorry, especially after I made the comment about the PM's behind other buyers backs. I know it's not a constellation but he said he'd take them at 1:45pm. The latches come with everything in the picture. I do have one of the backing plates that go behind the claw in the cab. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-22-2008, 06:56 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Some Parts I have For Sale well, that sucks then... let me check my other latches to see how good they are... after the no PM comment I would follow up with a "for sale locally" comment then... no biggie though __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-22-2008, 08:30 PM	#6
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: Some Parts I have For Sale Hey Bryan, I'll take the latches,if he passes. __________________ Joe

10-23-2008, 10:24 AM	#7
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Some Parts I have For Sale Sorry it took me a while to get over here. I posted over there about the signals before I seen the one here. There's a lot more posts to go through here __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

10-24-2008, 10:45 AM	#8
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Some Parts I have For Sale Joe, I'll give msgross another day to respond if he wants them or not. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-24-2008, 11:20 AM	#9
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Some Parts I have For Sale my computer was down last night... go ahead and move them on to the next guy... thanks __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-24-2008, 12:42 PM	#10
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Some Parts I have For Sale no problem, thanks for the reply Joe they're yours. Are you coming to Luv's cookout next weekend?? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-24-2008, 05:56 PM	#11
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: Some Parts I have For Sale No, I'm sorry but I cant make it. If you could add shipping to 37918 I will send a postal money order! THANKS __________________ Joe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.