Misc '68 GMC and '72 C10 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68GMCCustom · 11-04-2008, 06:31 PM

I need to clear out some space in my garage and attic...so I've got some parts for sale. Prefer local pickup on everything but could ship small items if needed. ALL LARGE ITEMS ARE LOCAL PICKUP ONLY.

'68 GMC steering wheel complete w/horn button - $50

Set of 16x7 6 lug Eagle alloy rims w/centers/lug nuts/tires - $200

Set of 15x7 5 lug Chrome Mod wheels w/centers/tires - SOLD

'68 Dana 44 6 lug rearend (3.07 open) including brakes and e-cables, setup for leafs - SOLD

Drive shaft for (SWB/3sp) rear end - $50

68GMCCustom · 11-04-2008, 06:38 PM

more-

'68 GMC 305 V6 radiator (small/narrow), shroud, and hoses - $45

'68 GMC throttle rod setup - $25

'68 GMC chrome headlight bezels w/buckets - $30 -SOLD
'68 GMC complete front turnsignals - $20

'72 evap canister - $10

'72 outer grill supports (pair) - $20

more-

68GMCCustom · 11-04-2008, 06:41 PM

'72 blue headliner (new in package) - $75 or trade for a black one

other-
'72 2 core radiator - used for roughly 2 weeks. - $189 new, sell for $75?
Old Hooker headers (for 2nd gen Camaro) fit my truck though. No collector fittings, must be welded up - $25
Old Edelbrock Perfomer for SBC - $30
'72 Rochester carb from O'Reilly's, run for about 2 months - $100
unused Goodridge 3pc stainless brake line set for '78 Camaro - $85

68GMCCustom · 11-07-2008, 12:14 AM

no bites?
If you see something listed you like but I'm too high on, feel free to make an offer.

Cyclone44 · 11-07-2008, 12:21 AM

What's your best price shipped to 37918 and does it have any problems at all????? And can you post me a picture???

Old Edelbrock Perfomer for SBC - $30

68GMCCustom · 11-07-2008, 03:28 PM

Parcel Post (US Mail) shows $12.66 for a 12x12x24 box weighing 10lbs. (which I think will be close)....so how about $40 shipped?

There's a busted bolt hole in front of the water neck...not sure what its used for but the PO didn't need it on his SBC. The bottom of the manifold has quite a bit of deterioration at the closed water jackets in the back of the manifold...but should bolt up fine and seal well.

I had gotten it for an old 305 I had to replace the OEM intake, then wound up buying a complete 383 with a Holley Street Dominator intake already on it...so I don't need the Performer anymore.

*MonteSS454* · 11-07-2008, 05:04 PM

Shipping on the GMC bezels to 74017 and they should fit a 71 right?

68GMCCustom · 11-08-2008, 12:32 AM

Quote:

Originally Posted by MonteSS454

Shipping on the GMC bezels to 74017 and they should fit a 71 right?

looks like about $4.75-$5 for shipping on those. I'm not sure they'll fit a '71 (and the other years) but I think so.

Can someone else say for sure...will '68 GMC headlight bezels fit a '71 also? Thx!

68GMCCustom · 11-08-2008, 05:11 PM

Headlight bezels are sold

49m · 11-08-2008, 11:32 PM

Set of 15x7 5 lug Chrome Mod wheels w/centers/tires - $150 is this all 4 and 5x5 lug
'72 2 core radiator - used for roughly 2 weeks. - $189 new, sell for $75?
how much to ship radiator

68GMCCustom · 11-09-2008, 12:48 AM

I have someone locally looking at those wheels so I'll have to put you in line for them. On the radiator...need a zip but it looks like $20 or so via US Mail unless there's a cheaper way (other then a bus

)?

if you need I can post some pics of it.

myoldchevytruck · 11-09-2008, 10:36 AM

Looks like a nice steering wheel. Any Cracks? What is the overall condition? Can you post some close up pictures? Shipping to 33024. Thanks.

MotorSeven · 11-09-2008, 11:34 AM

I can see a crack @ 1200hrs, but it looks like a decent driver.

Put me in line behind MyOld for it.

RD

68GMCCustom · 11-09-2008, 02:38 PM

Quote:

Originally Posted by myoldchevytruck

Looks like a nice steering wheel. Any Cracks? What is the overall condition? Can you post some close up pictures? Shipping to 33024. Thanks.

I'll get a box for it and see what it comes out to. It has a light crack at the top and some around the hub but nothing that couldn't be filled. It comes with the horn hardware and all but the horn button itself has some light rust on it.

Motor Seven...you're next in line for it if moct declines for whatever reason.

more pics and shipping quote to come this evening...

myoldchevytruck · 11-09-2008, 03:37 PM

Quote:

Originally Posted by 68GMCCustom

I'll get a box for it and see what it comes out to. It has a light crack at the top and some around the hub but nothing that couldn't be filled. It comes with the horn hardware and all but the horn button itself has some light rust on it.

Motor Seven...you're next in line for it if moct declines for whatever reason.

more pics and shipping quote to come this evening...

Thanks, waiting for quote to 33024 and more pics

68GMCCustom · 11-09-2008, 08:16 PM

Quote:

Originally Posted by 49m

Set of 15x7 5 lug Chrome Mod wheels w/centers/tires - $150 is this all 4 and 5x5 lug
'72 2 core radiator - used for roughly 2 weeks. - $189 new, sell for $75?
how much to ship radiator

I'm supposed to deliver the wheels/tires locally tomorrow so unless something falls thru both sets are gone.

I had the original box for the radiator but it doesn't seem heavy enough for shipping so I may need to find something else. You didn't supply a zip I'm guessing this might be close to $20 to ship.

68GMCCustom · 11-11-2008, 04:10 PM

ttt

68GMCCustom · 11-12-2008, 08:03 PM

MyOldChevyTruck and Motor Seven are you both passing on the '68 wheel now?
49m....how about the radiator?

myoldchevytruck · 11-12-2008, 11:55 PM

68GMC, I'm gonna pass on the steering wheel. Sorry for such a late response.

68GMCCustom · 11-13-2008, 12:01 AM

Not a problem, I just needed to know one way or the other.

MotorSeven · 11-13-2008, 11:12 AM

I am going to pass also...........PM sent.......

RD

11-04-2008, 06:31 PM	#1
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Misc '68 GMC and '72 C10 parts I need to clear out some space in my garage and attic...so I've got some parts for sale. Prefer local pickup on everything but could ship small items if needed. ALL LARGE ITEMS ARE LOCAL PICKUP ONLY. '68 GMC steering wheel complete w/horn button - $50 Set of 16x7 6 lug Eagle alloy rims w/centers/lug nuts/tires - $200 Set of 15x7 5 lug Chrome Mod wheels w/centers/tires - SOLD '68 Dana 44 6 lug rearend (3.07 open) including brakes and e-cables, setup for leafs - SOLD Drive shaft for (SWB/3sp) rear end - $50 __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 11-12-2008 at 06:39 PM. Reason: update

11-04-2008, 06:38 PM	#2
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts more- '68 GMC 305 V6 radiator (small/narrow), shroud, and hoses - $45 '68 GMC throttle rod setup - $25 '68 GMC chrome headlight bezels w/buckets - $30 -SOLD '68 GMC complete front turnsignals - $20 '72 evap canister - $10 '72 outer grill supports (pair) - $20 more- __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 11-08-2008 at 05:13 PM.

11-04-2008, 06:41 PM	#3
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts '72 blue headliner (new in package) - $75 or trade for a black one other- '72 2 core radiator - used for roughly 2 weeks. - $189 new, sell for $75? Old Hooker headers (for 2nd gen Camaro) fit my truck though. No collector fittings, must be welded up - $25 Old Edelbrock Perfomer for SBC - $30 '72 Rochester carb from O'Reilly's, run for about 2 months - $100 unused Goodridge 3pc stainless brake line set for '78 Camaro - $85 __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 11-04-2008 at 06:43 PM.

11-07-2008, 12:14 AM	#4
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts no bites? If you see something listed you like but I'm too high on, feel free to make an offer. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

11-07-2008, 12:21 AM	#5
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Misc '68 GMC and '72 C10 parts What's your best price shipped to 37918 and does it have any problems at all????? And can you post me a picture??? Old Edelbrock Perfomer for SBC - $30

11-07-2008, 03:28 PM	#6
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts Parcel Post (US Mail) shows $12.66 for a 12x12x24 box weighing 10lbs. (which I think will be close)....so how about $40 shipped? There's a busted bolt hole in front of the water neck...not sure what its used for but the PO didn't need it on his SBC. The bottom of the manifold has quite a bit of deterioration at the closed water jackets in the back of the manifold...but should bolt up fine and seal well. I had gotten it for an old 305 I had to replace the OEM intake, then wound up buying a complete 383 with a Holley Street Dominator intake already on it...so I don't need the Performer anymore. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 11-07-2008 at 03:31 PM.

11-07-2008, 05:04 PM	#7
MonteSS454 Account Suspended Join Date: Jun 2007 Location: Claremore, Oklahoma Posts: 821	Re: Misc '68 GMC and '72 C10 parts Shipping on the GMC bezels to 74017 and they should fit a 71 right?

11-08-2008, 05:11 PM	#9
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts Headlight bezels are sold __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

11-08-2008, 11:32 PM	#10
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: Misc '68 GMC and '72 C10 parts Set of 15x7 5 lug Chrome Mod wheels w/centers/tires - $150 is this all 4 and 5x5 lug '72 2 core radiator - used for roughly 2 weeks. - $189 new, sell for $75? how much to ship radiator __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

11-09-2008, 12:48 AM	#11
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts I have someone locally looking at those wheels so I'll have to put you in line for them. On the radiator...need a zip but it looks like $20 or so via US Mail unless there's a cheaper way (other then a bus )? if you need I can post some pics of it. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 11-09-2008 at 12:48 AM.

11-09-2008, 10:36 AM	#12
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Misc '68 GMC and '72 C10 parts Looks like a nice steering wheel. Any Cracks? What is the overall condition? Can you post some close up pictures? Shipping to 33024. Thanks. __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

11-09-2008, 11:34 AM	#13
MotorSeven Restoration Desperation Join Date: Aug 2006 Location: Tennessee Posts: 373	Re: Misc '68 GMC and '72 C10 parts I can see a crack @ 1200hrs, but it looks like a decent driver. Put me in line behind MyOld for it. RD

11-11-2008, 04:10 PM	#17
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts ttt __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

11-12-2008, 08:03 PM	#18
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts MyOldChevyTruck and Motor Seven are you both passing on the '68 wheel now? 49m....how about the radiator? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

11-12-2008, 11:55 PM	#19
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Misc '68 GMC and '72 C10 parts 68GMC, I'm gonna pass on the steering wheel. Sorry for such a late response. __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors



Register or Log In To remove these advertisements.

11-13-2008, 12:01 AM	#20
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Misc '68 GMC and '72 C10 parts Not a problem, I just needed to know one way or the other. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

11-13-2008, 11:12 AM	#21
MotorSeven Restoration Desperation Join Date: Aug 2006 Location: Tennessee Posts: 373	Re: Misc '68 GMC and '72 C10 parts I am going to pass also...........PM sent....... RD Last edited by MotorSeven; 11-13-2008 at 11:19 AM.

Register or Log In To remove these advertisements.