Will the carpet lay right over the high hump? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gregs67 · 11-11-2008, 11:45 PM

I am building this 67 2WD step using a 70 4x4 cab. I re-installed the high-hump, making a cool little cover for the 4 speed hole that follows the contour of the high hump stamping. (flat then sloping upward.)

We will be keeping it auto on the column for now, and wanted to use the high hump for a B&M rat**** shifter in the future. Our concern is this: Will the new ACC carpet lay smoothly over the shifter hump ("high hump) and is the 4 speed cole covered up or is it pre-stamped in the carpet? Hoping there isnt a hole there.

thanks!

1968SWBBigBlock · 11-12-2008, 12:12 AM

Just make sure that you order high hump carpet not low hump and you should be fine
The carpet I have seen has little to no forming

Longhorn Man · 11-12-2008, 06:54 AM

no hole, and the carpet should hug the hump quite fine

PanelDeland · 11-12-2008, 10:05 AM

Your vendor should ask if the carpet is for a high hump or low.The high should work perfect.Make sure you lay it out in a warm place to relax before installing.

11-11-2008, 11:45 PM	#1
Gregs67 Registered User Join Date: Oct 2008 Location: bath PA Posts: 22	Will the carpet lay right over the high hump? I am building this 67 2WD step using a 70 4x4 cab. I re-installed the high-hump, making a cool little cover for the 4 speed hole that follows the contour of the high hump stamping. (flat then sloping upward.) We will be keeping it auto on the column for now, and wanted to use the high hump for a B&M rat**** shifter in the future. Our concern is this: Will the new ACC carpet lay smoothly over the shifter hump ("high hump) and is the 4 speed cole covered up or is it pre-stamped in the carpet? Hoping there isnt a hole there. thanks!

11-12-2008, 12:12 AM	#2
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Will the carpet lay right over the high hump? Just make sure that you order high hump carpet not low hump and you should be fine The carpet I have seen has little to no forming __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

11-12-2008, 06:54 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Will the carpet lay right over the high hump? no hole, and the carpet should hug the hump quite fine

11-12-2008, 10:05 AM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Will the carpet lay right over the high hump? Your vendor should ask if the carpet is for a high hump or low.The high should work perfect.Make sure you lay it out in a warm place to relax before installing. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.