![]() |
|
![]() |
#1 |
accepting donations
Join Date: Oct 2008
Location: houston tx
Posts: 521
|
Kickdown adjustment
What is the proper procedure for adjusting the kickdown cable?
Should there be any slack in it?
__________________
1999 Yamaha roadstar 1600 chop. (in progress.) See my builds here>http://s113.photobucket.com/albums/n238/nickrp_2006/ "Ya'll can go to hell, I'm going to Texas." David Crockett |
![]() |
![]() |
![]() |
#2 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: Kickdown adjustment
Adjust so it works at WOT. You can pull on the cable and feel it engage. There may be some slack in the cable at idle.
Edit: This is for a TH350 or TH400...
__________________
Beat it to fit, Paint it to match... ![]() Last edited by Sinister; 11-23-2008 at 03:22 PM. |
![]() |
![]() |
![]() |
#3 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,005
|
Re: Kickdown adjustment
check this site. www.bowtieoverdrives.com
great ifo on TV cable set ups |
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Kickdown adjustment
We need to know what kind of tranny you have before the question can be properly answered.
A TH350 or TH200 (400 doesn't use a cable) would be the way Sinister described (there's a more acurate way of getting the adjustment though) If it is a 700 R4 or a 200 4R, then you need to read up on TV cable adjustments, and the BTO link that leddzepp posted is possibly the best way of doing it. |
![]() |
![]() |
![]() |
#5 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: Kickdown adjustment
I had a brainfart on the TH400, because I have the Lokar setup which uses a cable operated switch.
__________________
Beat it to fit, Paint it to match... ![]() |
![]() |
![]() |
![]() |
#6 |
accepting donations
Join Date: Oct 2008
Location: houston tx
Posts: 521
|
Re: Kickdown adjustment
Sorry, it's a 350.
I had a 700r4 in my old camaro and I think I used to move the plastice part forward or back. It was 10 years ago so I cant remember.
__________________
1999 Yamaha roadstar 1600 chop. (in progress.) See my builds here>http://s113.photobucket.com/albums/n238/nickrp_2006/ "Ya'll can go to hell, I'm going to Texas." David Crockett |
![]() |
![]() |
![]() |
#7 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Kickdown adjustment
these pics may be out of order... but you pup the plastic piece up on the assembly with a screwdriver as shown, hold the carb at wide open throttle (engine off) and as you hold the linkage open, you press the piece back down.
Done. |
![]() |
![]() |
![]() |
Bookmarks |
|
|