![]() |
|
![]() |
#1 |
Registered User
Join Date: May 2007
Location: San Antonio
Posts: 993
|
t-case questons
Ok guy's, i'm about to put the tranny and t-case back into the blazer but I wanted to put some gear oil into the t-case. Where do i fill it? Can i use the breather opening? Any help wld be appreciated. Thanks, Mario.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2007
Location: San Antonio
Posts: 993
|
Re: t-case questons
I guess nobody out there knows, I filled it through the pto plate.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2007
Location: texas
Posts: 329
|
Re: t-case questons
It should have a plug on the side to fill it. Just like the rear end.. Fill with 80 -90 gear lube till it comes out the hole (with it on fairly level ground) then put the plug back in.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2007
Location: San Antonio
Posts: 993
|
Re: t-case questons
Thanks Old Man Jimmy, The t-case was pretty wel crusted over with dirt and grime. Didn't even see the plug. I ended filling it up through the pto plate. I really appreciate the feedback. Thanks, Mario
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() ![]() Join Date: Jan 2002
Location: Burghill, Ohio 44404
Posts: 3,402
|
Re: t-case questions
Their should be 2 holes the one in the bottom is for draining it and the one above it is for filling it.
__________________
![]() ![]() 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396 |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Nov 2007
Location: South Tx
Posts: 1,083
|
Re: t-case questions
Correct. Since you filled it thru the PTO plate, find the regular fill plug to make sure you have the right amount of fluid in the case.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|