cabs,stepside bed,doors,fenders and parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ricks1971** · 12-09-2008, 05:47 PM

I still have these 2 cabs for sale. 72 cab with doors very clean non air. reduced $450. 70 air can with doors reduced $150. 67 stepside bed $300. fenders and doors $25 each. These large items are pick up only.67-68 tow hooks $200 shipped. stepside steps $80 shipped. 1/2 ton cab mounts (rubber) $45 shipped. petel set w/ss $30 shipped. sbc a/c brackets $30 shipped. a/c heater switch $30 shipped.

**Ricks1971** · 12-09-2008, 08:46 PM

here's some FREE stuff. you can pick this up free or pay the shipping and I'll send it free.

msgross · 12-09-2008, 08:49 PM

dibs on brake booster setup bracket (is the pushrod there?) and SS pedal set...

are the two parking light setups from a 67-68? is there a good set of hood hinges? how's the shifter boot?

Nice cabs, wish I had a uhaul heading this way with them...

**Ricks1971** · 12-09-2008, 08:53 PM

Mike, you got it I'll find out how much the shipping is for the brake pod. thanks Rick

msgross · 12-09-2008, 09:18 PM

Is the push rod included with the brake setup? If so then I think i'll only need the bracket and push rod. Someone else might need a booster and MC. I'm gonna pay to send it to another board member for his previous generosity... I have my own fedex account so it would only need boxed up...

I PM'd him to see if that's what he needed... thanks.

I assume that the SS pedal setup is all new and unopened?

eric72 · 12-09-2008, 09:27 PM

pm sent

67Mach1 · 12-09-2008, 09:24 PM

interstesd in the cab mounts,
I'll assume they come with the bolts and sleeves shown in the photo?

I'll take them if they are all inclusive.

PM Sent

Thanks,
Thomas

bryanschevyparts · 12-09-2008, 09:38 PM

i will take the ss pedals.if Mike passes

greyghost · 12-09-2008, 09:42 PM

I'll take the cab mounts...pm with a price on them shipped to 36582, Thanks,
Robert

Slammed 68 c10 · 12-09-2008, 10:12 PM

I want a cab and doors very bad !!! But live in Alberta , Canada . I do have some shipping hook ups for old parts , because i work in a hot rod shop . Would you be interested , i would pay for all extra costs . You can email if you want
joeseip77@hotmail.com

**Ricks1971** · 12-09-2008, 10:23 PM

grey ghost ,67mach1 took the cab mounts.

Slammed 68 c10 · 12-09-2008, 10:32 PM

What about the cab and doors ? Still have them ?

**Ricks1971** · 12-09-2008, 10:42 PM

I still have the cabs and doors. I sent you a email on who you might contact to ship it to canada.

Slammed 68 c10 · 12-09-2008, 10:50 PM

How the 72 cab ? Is that the gold one ? Any rust ? do you have more pics ?

Slammed 68 c10 · 12-10-2008, 12:01 AM

Ok thanks , I will let you know what i come up with .

**Ricks1971** · 12-10-2008, 03:02 PM

here's a few more things I need to sell.
1969 lic plate frame and book. $15 shipped,upper 4 core radiator brackets and rubbers. $20 shipped,new locking gas cap $12 shipped, new lighter assembly $15 shipped. also have a radiator support FREE and 2 gas tanks FREE also 2 hoods 69-72 surface rust FREE these free items need to be picked up only no shipping on these. thanks Rick

67Mach1 · 12-10-2008, 03:40 PM

Rick,

I will also take the four core radiator support brackets and rubbers.

Will add to my MO.

Thanks,
Thomas

clos69 · 12-10-2008, 03:55 PM

Hey Rick.....I am still interested in the frame and owner's manual..If you can throw the gas cap in for $10..I'll take it also..pm you address so I can send you a postal MO

**Ricks1971** · 12-10-2008, 10:36 PM

I still have alot of parts. these parts are sold.
petal set and brake booster msgross
cab mounts and rad supports 67mach1
lic plate frame&book and gas cap clos69

Slammed 68 c10 · 12-11-2008, 01:22 AM

Have been checking on shipping still very interested , do you have mint front fenders , both sides needed and a short box fleet side ?

**Ricks1971** · 12-11-2008, 09:09 AM

slammed 68 I have a very clean fender but no fleetside boxes. Let me know if you find anyone that will transport this box. thanks Rick

heavy71chevy · 12-11-2008, 08:48 PM

PM sent about the steering colomns

**WIDESIDE72** · 12-11-2008, 08:57 PM

I need the 4 barrel carb to air cleaner spacer.howmuch to get it to Leander TX 78641?

**Ricks1971** · 12-11-2008, 10:40 PM

(heavy71chevy) i'll need you zip code to get ya the shipping as for the colomns there are free.
(wideside72) I guess the cheapest way is a flat rate box for $10 is there any othermall free parts you want me to fit in the box let me know.

heavy71chevy · 12-14-2008, 09:58 PM

My zip is 34609..let me know

Quote:

Originally Posted by Ricks1971

(heavy71chevy) i'll need you zip code to get ya the shipping as for the colomns there are free.
(wideside72) I guess the cheapest way is a flat rate box for $10 is there any othermall free parts you want me to fit in the box let me know.

12-09-2008, 05:47 PM	#1
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	cabs,stepside bed,doors,fenders and parts I still have these 2 cabs for sale. 72 cab with doors very clean non air. reduced $450. 70 air can with doors reduced $150. 67 stepside bed $300. fenders and doors $25 each. These large items are pick up only.67-68 tow hooks $200 shipped. stepside steps $80 shipped. 1/2 ton cab mounts (rubber) $45 shipped. petel set w/ss $30 shipped. sbc a/c brackets $30 shipped. a/c heater switch $30 shipped.

12-09-2008, 08:46 PM	#2
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts here's some FREE stuff. you can pick this up free or pay the shipping and I'll send it free.

12-09-2008, 08:49 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: cabs,stepside bed,doors,fenders and parts dibs on brake booster setup bracket (is the pushrod there?) and SS pedal set... are the two parking light setups from a 67-68? is there a good set of hood hinges? how's the shifter boot? Nice cabs, wish I had a uhaul heading this way with them... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 12-09-2008 at 08:54 PM.

12-09-2008, 08:53 PM	#4
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts Mike, you got it I'll find out how much the shipping is for the brake pod. thanks Rick

12-09-2008, 09:18 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: cabs,stepside bed,doors,fenders and parts Is the push rod included with the brake setup? If so then I think i'll only need the bracket and push rod. Someone else might need a booster and MC. I'm gonna pay to send it to another board member for his previous generosity... I have my own fedex account so it would only need boxed up... I PM'd him to see if that's what he needed... thanks. I assume that the SS pedal setup is all new and unopened? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

12-09-2008, 09:27 PM	#6
eric72 Registered User Join Date: Dec 2003 Location: georgia Posts: 212	Re: cabs,stepside bed,doors,fenders and parts pm sent

12-09-2008, 09:24 PM	#7
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: cabs,stepside bed,doors,fenders and parts interstesd in the cab mounts, I'll assume they come with the bolts and sleeves shown in the photo? I'll take them if they are all inclusive. PM Sent Thanks, Thomas __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale Last edited by 67Mach1; 12-09-2008 at 10:11 PM.

12-09-2008, 09:38 PM	#8
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: cabs,stepside bed,doors,fenders and parts i will take the ss pedals.if Mike passes Last edited by bryanschevyparts; 12-09-2008 at 09:39 PM.

12-09-2008, 09:42 PM	#9
greyghost Registered User Join Date: May 2008 Location: Katy,Tx Posts: 65	Re: cabs,stepside bed,doors,fenders and parts I'll take the cab mounts...pm with a price on them shipped to 36582, Thanks, Robert

12-09-2008, 10:12 PM	#10
Slammed 68 c10 Registered User Join Date: Nov 2008 Location: Calgary Alberta Posts: 7	Re: cabs,stepside bed,doors,fenders and parts I want a cab and doors very bad !!! But live in Alberta , Canada . I do have some shipping hook ups for old parts , because i work in a hot rod shop . Would you be interested , i would pay for all extra costs . You can email if you want joeseip77@hotmail.com

12-09-2008, 10:23 PM	#11
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts grey ghost ,67mach1 took the cab mounts.

12-09-2008, 10:32 PM	#12
Slammed 68 c10 Registered User Join Date: Nov 2008 Location: Calgary Alberta Posts: 7	Re: cabs,stepside bed,doors,fenders and parts What about the cab and doors ? Still have them ?

12-09-2008, 10:42 PM	#13
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts I still have the cabs and doors. I sent you a email on who you might contact to ship it to canada.

12-09-2008, 10:50 PM	#14
Slammed 68 c10 Registered User Join Date: Nov 2008 Location: Calgary Alberta Posts: 7	Re: cabs,stepside bed,doors,fenders and parts How the 72 cab ? Is that the gold one ? Any rust ? do you have more pics ?

12-10-2008, 12:01 AM	#15
Slammed 68 c10 Registered User Join Date: Nov 2008 Location: Calgary Alberta Posts: 7	Re: cabs,stepside bed,doors,fenders and parts Ok thanks , I will let you know what i come up with .



Register or Log In To remove these advertisements.

12-10-2008, 03:02 PM	#16
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts here's a few more things I need to sell. 1969 lic plate frame and book. $15 shipped,upper 4 core radiator brackets and rubbers. $20 shipped,new locking gas cap $12 shipped, new lighter assembly $15 shipped. also have a radiator support FREE and 2 gas tanks FREE also 2 hoods 69-72 surface rust FREE these free items need to be picked up only no shipping on these. thanks Rick

12-10-2008, 03:40 PM	#17
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: cabs,stepside bed,doors,fenders and parts Rick, I will also take the four core radiator support brackets and rubbers. Will add to my MO. Thanks, Thomas __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

12-10-2008, 03:55 PM	#18
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: cabs,stepside bed,doors,fenders and parts Hey Rick.....I am still interested in the frame and owner's manual..If you can throw the gas cap in for $10..I'll take it also..pm you address so I can send you a postal MO __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

12-10-2008, 10:36 PM	#19
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts I still have alot of parts. these parts are sold. petal set and brake booster msgross cab mounts and rad supports 67mach1 lic plate frame&book and gas cap clos69

12-11-2008, 01:22 AM	#20
Slammed 68 c10 Registered User Join Date: Nov 2008 Location: Calgary Alberta Posts: 7	Re: cabs,stepside bed,doors,fenders and parts Have been checking on shipping still very interested , do you have mint front fenders , both sides needed and a short box fleet side ?

12-11-2008, 09:09 AM	#21
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts slammed 68 I have a very clean fender but no fleetside boxes. Let me know if you find anyone that will transport this box. thanks Rick

12-11-2008, 08:48 PM	#22
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: cabs,stepside bed,doors,fenders and parts PM sent about the steering colomns __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

12-11-2008, 08:57 PM	#23
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: cabs,stepside bed,doors,fenders and parts I need the 4 barrel carb to air cleaner spacer.howmuch to get it to Leander TX 78641?

12-11-2008, 10:40 PM	#24
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: cabs,stepside bed,doors,fenders and parts (heavy71chevy) i'll need you zip code to get ya the shipping as for the colomns there are free. (wideside72) I guess the cheapest way is a flat rate box for $10 is there any othermall free parts you want me to fit in the box let me know.

Register or Log In To remove these advertisements.