Some New & Used Parts For Sale From My 70 K-10 Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rack Man · 12-12-2008, 01:15 AM

Not sure what these Items are worth ....any fair offer gets them....Bumper & Bench Seat are for PU only.....

OK...before I get in trouble all items are $500 each or BEST OFFER,,,,,there does that meet the rules?.....JK....I added prices!

1. New Reman. Power Steering Pump....I believe it's for a 73 and up truck...as it did not work with the rear factory bracket from my 70....$45 shipped

2. GM NOS Transfer Case Torque Mount Grommets - $30.00 shipped

3. Stock style (SBC) aluminum water outlet and 180 degree thermostat...It's new, just been painted - $10.00 shipped

4. New Rancho Steering Stabalizer & hardware mounting kit - $50.00 shipped

5. Rear U-bolt Mounting Plates - Stock for GM 12 bolt - Sandblasted & Powder-coated -$15.00 shipped

6. Stock steel bumper.....good shape w/ receiver hitch....Free....PU Only

7. Stock Bench Seat...in excellent condition....Newly covered...PU Only - $200.00 OBO

Thanks, Dan

**Classic Bowties** · 12-12-2008, 01:43 AM

I am interested in item #2. GM NOS Transfer Case Torque Mount Grommets

Are there any part numbers present, how much for them shipped to OR. Zip 97233?

**Classic Bowties** · 12-12-2008, 01:52 AM

Quote:

Originally Posted by Classic Bowties

I am interested in item #2. GM NOS Transfer Case Torque Mount Grommets

Are there any part numbers present, how much for them shipped to OR. Zip 97233?

I just enlarged your pic and can make out enough of the p/n to think they are what I am looking for. I will take them, please confirm that they are P/N's 2391770 & 2391771 and how many you have of each. Thanks

badpeanut · 12-12-2008, 08:07 AM

Quote:

Originally Posted by Rack Man

4. New Rancho Steering Stabalizer & hardware mounting kit

How much shipped to 58401?

Does it fit your '70?

Is there a part number?

sdailey · 12-12-2008, 08:28 AM

Quote:

Originally Posted by badpeanut

How much shipped to 58401?

Does it fit your '70?

Is there a part number?

How much shipped to 30107 if badpeanut passes? I'd like to know the part # as well.

70GMCer · 12-12-2008, 08:38 AM

You better put prices on this stuff before the "Mods" attack you. Board rules. Must state prices. Sure would like to have that bumper. Wish you were closer.

msgross · 12-12-2008, 10:00 AM

Is that the RS97325? If so i'll get in line for $40 shipped since you didn't post prices. (which you need to)

Rack Man · 12-12-2008, 10:58 AM

Prices added....As per rules....Which to me is kinda stupid as OBO overrides everything anyways! JMO!

Not sure of what all it fits on....but I believe it's a "Universal" type that will work on many applications....It was sold to me by Wes @ Classic Heartbeat - He picked it for my application.....which was for a 1970 Dana 44.....I wound up using a front axle out of a 76...and It required a completely different style stabalizer as it already had them mounting bracket attached to it......

Part number for Stabilizer is: RS5402
Mounting Kit # is: RS5509

**Classic Bowties** · 12-12-2008, 12:37 PM

Above bushings sold by pm, WBTB???

Crappy seller, buyer beware...

Rack Man · 12-12-2008, 12:47 PM

I'm a crappy seller because someone else beat you to them and because you didn't want to make an offer......AARGH...I'm just trying to make the stuff go away....I would of let them go for free...just the ride....

This is the Internet....The first one who commits and shows me the money...WINS!

Dan

Quote:

Originally Posted by Classic Bowties

Above bushings sold by pm, WBTB???

Crappy seller, buyer beware...

**Classic Bowties** · 12-12-2008, 12:57 PM

Quote:

Originally Posted by Rack Man

I'm a crappy seller because someone else beat you to them

Beat me to them? The first two post in your FS thread are by me...

WBTB???

badpeanut · 12-13-2008, 12:05 AM

Quote:

Originally Posted by Rack Man

Part number for Stabilizer is: RS5402
Mounting Kit # is: RS5509

I'm going to pass; the stabilizer isn't the right part number for my truck.

Rack Man · 12-13-2008, 06:24 PM

New Prices for what is left.....

1. New Reman. Power Steering Pump....I believe it's for a 73 and up truck...as it did not work with the rear factory bracket from my 70....$30 shipped

2. New Rancho Steering Stabalizer & hardware mounting kit - $40.00 shipped

3. Rear U-bolt Mounting Plates - Stock for GM 12 bolt - Sandblasted & Powder-coated -$10.00

4. Stock steel bumper.....good shape w/ receiver hitch....Free....PU Only

Dan

msgross · 12-12-2008, 02:20 PM

Rackman

He's trying to say that people are suppose to reply in the thread, not by PM... that keeps it in the open and nobody feels cheated...

PM is fine for the details (price, shipping, payment etc..) but people are suppose to "get in line" on the thread itself...

I have an 82 axle so it won't work for me either then...

the prices are because people use to turn it into Ebay with a bidding war...

Rack Man · 12-12-2008, 02:35 PM

Thanks Mike for helping me understand....I just Never sold that way on a board before....I prefer that the first guy who commits and pays for it owns it....as there are times when you hold something for someone and they never come through and in the meantime you miss other potential buyers.....

But I'm new and learning....Just don't think I deserved to be CRUCIFIED by him over it either.....

Dan

Quote:

Originally Posted by msgross

Rackman

He's trying to say that people are suppose to reply in the thread, not by PM... that keeps it in the open and nobody feels cheated...

PM is fine for the details (price, shipping, payment etc..) but people are suppose to "get in line" on the thread itself...

I have an 82 axle so it won't work for me either then...

the prices are because people use to turn it into Ebay with a bidding war...

msgross · 12-12-2008, 02:42 PM

I agree, i've lost stuff by not stating "i'll take it" but by asking questions instead....

up to you to fix it then... good luck

da rules: your PM buyer needs to read them as well... they are just as wrong..

http://67-72chevytrucks.com/vboard/a...nt.php?f=8&a=8

**Classic Bowties** · 12-12-2008, 02:57 PM

Quote:

Originally Posted by Rack Man

I prefer that the first guy who commits and pays for it owns it....

Quote:

Originally Posted by msgross

I agree, i've lost stuff by not stating "i'll take it" but by asking questions instead....

The commitment was shown above in post #3: I will take them, please confirm that they are P/N's 2391770 & 2391771 and how many you have of each. Thanks

It's in plain, easy to understand text. I am not the one editing - deleting any post in this thread either....

WBTB???

Rack Man · 12-12-2008, 03:04 PM

Quote:

Originally Posted by Classic Bowties

The commitment was shown above in post #3: I will take them, please confirm that they are P/N's 2391770 & 2391771 and how many you have of each. Thanks

It's in plain, easy to understand text. I am not the one editing - deleting any post in this thread either....

WBTB???

This was your commitment?...VIA PM......Sounds like a big maybe to me....

Quote:

Hi Dan, I was just trying to buy your bushings and now you want me to sell them too , I dont like pricing other peoples stuff. I really do not know what these rubber one's are worth, the last set I purchased was more then 5 years ago for my k/5 and they were the poly type bushings. Just let me know what you need for them and I will give you a yes/no answer

Ok...so I made a mistake in not originally putting the prices on the items....Maybe your first post to me should have told me that I needed to do that.....My thinking is....that you were hoping that It would be a total steal...cuz I'm sure you were probably just gonna re-sell them anyways.....

**Classic Bowties** · 12-12-2008, 03:25 PM

Quote:

Originally Posted by Rack Man

This was your commitment?...VIA PM......Sounds like a big maybe to me....

Yes, once again my commitment was stated in fs thread post #3, I have never backed out / left someone hanging-waiting for their $$$.

That qouted pm was the the last contact sent by myself asking you to price your own stuff, by this time I had realized that you were shopping/ebaying the parts to the highest bidder.

This will be my last post in your smelly thread, just one last question - WBTB???

These guys (pm buyers) are the ones to put the blame on here, these type of private dealings are going on way to much!

Rack Man · 12-12-2008, 04:17 PM

Quote:

Originally Posted by Classic Bowties

That qouted pm was the the last contact sent by myself asking you to price your own stuff, by this time I had realized that you were shopping/ebaying the parts to the highest bidder.

Really that was your last PM to me.......Actually, This was your last PM to me....comparing the Poly ones from Ebay...

Quote:

I just did an ebay search for value on these bushings and ony found the poly type like I used on by K/5. Here is that clickable link: http://cgi.ebay.com/ebaymotors/ws/eB...m=360103940747

Let it die dude....it's a set of bushings for crying out loud.....Oh and thanks for the PM's from the quiet supporters who agree that is was a harmless mistake!

I LOVE MY TRUCK!

Dan

PT'S 70 CST · 12-12-2008, 02:55 PM

Board rules are to reply to the post and if someone has replied and shows intrest then pm's you with questions that is ok. If someone does not reply and is trying to buy them via pm only, then that is not acceptable and is in the rules. Please read the rules on selling if you are not sure. This goes for buyers and sellers.

Thanks PT

jholley · 12-12-2008, 03:30 PM

What is WBTB???

drunkbus · 12-12-2008, 05:17 PM

Quote:

Originally Posted by jholley

What is WBTB???

x2

msgross · 12-12-2008, 04:23 PM

I agree too, harmless mistake...

sdailey · 12-12-2008, 05:13 PM

I'm sure it was an honest mistake. Lesson learned.

Dan is good people.

12-12-2008, 01:15 AM	#1
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Some New & Used Parts For Sale From My 70 K-10 Project Not sure what these Items are worth ....any fair offer gets them....Bumper & Bench Seat are for PU only..... OK...before I get in trouble all items are $500 each or BEST OFFER,,,,,there does that meet the rules?.....JK....I added prices! 1. New Reman. Power Steering Pump....I believe it's for a 73 and up truck...as it did not work with the rear factory bracket from my 70....$45 shipped 2. GM NOS Transfer Case Torque Mount Grommets - $30.00 shipped 3. Stock style (SBC) aluminum water outlet and 180 degree thermostat...It's new, just been painted - $10.00 shipped 4. New Rancho Steering Stabalizer & hardware mounting kit - $50.00 shipped 5. Rear U-bolt Mounting Plates - Stock for GM 12 bolt - Sandblasted & Powder-coated -$15.00 shipped 6. Stock steel bumper.....good shape w/ receiver hitch....Free....PU Only 7. Stock Bench Seat...in excellent condition....Newly covered...PU Only - $200.00 OBO Thanks, Dan __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288 Last edited by Rack Man; 12-12-2008 at 10:51 AM.

12-12-2008, 08:38 AM	#6
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Some New & Used Parts For Sale From My 70 K-10 Project You better put prices on this stuff before the "Mods" attack you. Board rules. Must state prices. Sure would like to have that bumper. Wish you were closer. __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 12-12-2008 at 08:39 AM.

12-12-2008, 10:00 AM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Some New & Used Parts For Sale From My 70 K-10 Project Is that the RS97325? If so i'll get in line for $40 shipped since you didn't post prices. (which you need to) __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 12-12-2008 at 10:00 AM.

12-12-2008, 10:58 AM	#8
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: Some New & Used Parts For Sale From My 70 K-10 Project Prices added....As per rules....Which to me is kinda stupid as OBO overrides everything anyways! JMO! Not sure of what all it fits on....but I believe it's a "Universal" type that will work on many applications....It was sold to me by Wes @ Classic Heartbeat - He picked it for my application.....which was for a 1970 Dana 44.....I wound up using a front axle out of a 76...and It required a completely different style stabalizer as it already had them mounting bracket attached to it...... Part number for Stabilizer is: RS5402 Mounting Kit # is: RS5509 __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288 Last edited by Rack Man; 12-12-2008 at 12:26 PM.

12-12-2008, 12:37 PM	#9
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,767	Re: Some New & Used Parts For Sale From My 70 K-10 Project Above bushings sold by pm, WBTB??? Crappy seller, buyer beware...

12-12-2008, 01:43 AM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,767	Re: Some New & Used Parts For Sale From My 70 K-10 Project I am interested in item #2. GM NOS Transfer Case Torque Mount Grommets Are there any part numbers present, how much for them shipped to OR. Zip 97233?

12-13-2008, 06:24 PM	#13
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: Some New & Used Parts For Sale From My 70 K-10 Project New Prices for what is left..... 1. New Reman. Power Steering Pump....I believe it's for a 73 and up truck...as it did not work with the rear factory bracket from my 70....$30 shipped 2. New Rancho Steering Stabalizer & hardware mounting kit - $40.00 shipped 3. Rear U-bolt Mounting Plates - Stock for GM 12 bolt - Sandblasted & Powder-coated -$10.00 4. Stock steel bumper.....good shape w/ receiver hitch....Free....PU Only Dan __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

12-12-2008, 02:20 PM	#14
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Some New & Used Parts For Sale From My 70 K-10 Project Rackman He's trying to say that people are suppose to reply in the thread, not by PM... that keeps it in the open and nobody feels cheated... PM is fine for the details (price, shipping, payment etc..) but people are suppose to "get in line" on the thread itself... I have an 82 axle so it won't work for me either then... the prices are because people use to turn it into Ebay with a bidding war... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 12-12-2008 at 02:24 PM.

12-12-2008, 02:42 PM	#16
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Some New & Used Parts For Sale From My 70 K-10 Project I agree, i've lost stuff by not stating "i'll take it" but by asking questions instead.... up to you to fix it then... good luck da rules: your PM buyer needs to read them as well... they are just as wrong.. http://67-72chevytrucks.com/vboard/a...nt.php?f=8&a=8 __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 12-12-2008 at 02:48 PM.

12-12-2008, 02:55 PM	#21
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Some New & Used Parts For Sale From My 70 K-10 Project Board rules are to reply to the post and if someone has replied and shows intrest then pm's you with questions that is ok. If someone does not reply and is trying to buy them via pm only, then that is not acceptable and is in the rules. Please read the rules on selling if you are not sure. This goes for buyers and sellers. Thanks PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

12-12-2008, 03:30 PM	#22
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: Some New & Used Parts For Sale From My 70 K-10 Project What is WBTB??? __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

12-12-2008, 04:23 PM	#24
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Some New & Used Parts For Sale From My 70 K-10 Project I agree too, harmless mistake... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

12-12-2008, 05:13 PM	#25
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Some New & Used Parts For Sale From My 70 K-10 Project I'm sure it was an honest mistake. Lesson learned. Dan is good people. __________________ Shannon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.