short stepside measurement needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pugs · 12-12-2008, 03:47 PM

as i have rear fenders for the 57 at the moment, i need a measurement,
from the rear of the rail going forward to center of wheelwell opening

55Series2 · 12-12-2008, 06:04 PM

I can get you a measurement off my '55 step if you will clarify which rail(?) you want a measurement from.

pugs · 12-12-2008, 06:47 PM

top of bed rail going forward to center of wheelwell thanx

55Series2 · 12-13-2008, 04:17 PM

Measured from the rear edge of the rear stake pocket forward to the center of the wheel well opening - 40 inches. I used the axle centerline as the center of the wheel well.

Hope this helps

pugs · 12-13-2008, 04:22 PM

thanx man, i will have to post pics later. but a guy i talked to a couple of weeks ago just dropped off a pr of rear (rough as hell) fenders for FREE, yes i said FREE

55Series2 · 12-13-2008, 04:23 PM

Free is good

12-12-2008, 03:47 PM	#1
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	short stepside measurement needed as i have rear fenders for the 57 at the moment, i need a measurement, from the rear of the rail going forward to center of wheelwell opening __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

12-12-2008, 06:04 PM	#2
55Series2 Registered User Join Date: Nov 2008 Location: Albuquerque, NM Posts: 17	Re: short stepside measurement needed I can get you a measurement off my '55 step if you will clarify which rail(?) you want a measurement from. __________________ John Albuquerque, NM '55 2nd Series 3100 '57 Ford RanchWagon 07 H-D Electraglide UltraClassic

12-12-2008, 06:47 PM	#3
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	Re: short stepside measurement needed top of bed rail going forward to center of wheelwell thanx __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

12-13-2008, 04:17 PM	#4
55Series2 Registered User Join Date: Nov 2008 Location: Albuquerque, NM Posts: 17	Re: short stepside measurement needed Measured from the rear edge of the rear stake pocket forward to the center of the wheel well opening - 40 inches. I used the axle centerline as the center of the wheel well. Hope this helps __________________ John Albuquerque, NM '55 2nd Series 3100 '57 Ford RanchWagon 07 H-D Electraglide UltraClassic

12-13-2008, 04:22 PM	#5
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	Re: short stepside measurement needed thanx man, i will have to post pics later. but a guy i talked to a couple of weeks ago just dropped off a pr of rear (rough as hell) fenders for FREE, yes i said FREE __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

12-13-2008, 04:23 PM	#6
55Series2 Registered User Join Date: Nov 2008 Location: Albuquerque, NM Posts: 17	Re: short stepside measurement needed Free is good __________________ John Albuquerque, NM '55 2nd Series 3100 '57 Ford RanchWagon 07 H-D Electraglide UltraClassic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.