![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2008
Location: la
Posts: 345
|
83 emission diagram
does anybody have a link to an emissions diagram for an 83 suburban with 350 an 4-barrel. I have to replace the motor and alot of the hoses were blocked or just missing. Thanks
|
![]() |
![]() |
![]() |
#2 |
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,369
|
Re: 83 emission diagram
I had the same problem with my dad's truck. I found what I needed at the local library in the shop manuals...
Chuck
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
![]() |
![]() |
![]() |
#3 |
Right on the line, baby!
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
|
Re: 83 emission diagram
Hey, here's one for a 305 GMC, low altitude, non-CA pickup. (Should be very similar if not the same.) I found that, for some reason, this diagram (DDZ) isn't in any of the idiot books and 83 is a very hard year to find diagrams.
Hope this helps- -Todd
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here! |
![]() |
![]() |
![]() |
#4 |
Right on the line, baby!
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
|
Re: 83 emission diagram
Yo- I just saw you are from CA. Bummer. Here's a linky to Autozone's repair info and a long list of vac diagrams:
VACUUM DIAGRAMS GM Full-Size Trucks 1980-1987 Repair Guide If my previous doesn't help, hopefully you can find it in the link. -Todd
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here! |
![]() |
![]() |
![]() |
#5 |
Cruzzzn' Vet
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
|
Re: 83 emission diagram
This is off my 83 with the 305
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2008
Location: la
Posts: 345
|
Re: 83 emission diagram
thanks for the pictures guys... i have the sticker under the hood that I have used for reference. I am looking more specifically for the little vacuum lines that come off of sensors that are not listed on the diagram (should have been more specific).
There is one on the front of the intake next to the temp sender that has 2 vacuum lines going to it ( no idea what it is for or where it goes but it is there). anybody have an fsm that they could scan a couple pages out of. I plan on getting one as soon as I finish the motor swap. Thanks |
![]() |
![]() |
![]() |
#7 |
Right on the line, baby!
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
|
Re: 83 emission diagram
What you're describing sounds like either the EFE TVS or the EGR/PURGE/TCC/TVS on mine. I would take a shot of the engine, but all of mine fell off when I dropped in the new motor.
Good luck- -Todd
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here! |
![]() |
![]() |
![]() |
Bookmarks |
|
|