|
|
|
12-25-2008, 05:07 PM
|
#1 |
|
Young Gun
Join Date: Aug 2008
Location: Waupaca, Wi
Posts: 192
|
Power Steering
I am thinking about putting power steering on my 70 c/20 and i was wondering what i all need from a 73-87 truck. I know the pump and brackets but what else. This is a straight axle truck if that makes a difference.
|
|
|
|
12-25-2008, 05:27 PM
|
#2 |
|
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Power Steering
2wd?
you'll need the pump, steering box, hoses, brackets, crank pulley wouldn't hurt... You'll be lucky if the PS pump lines up on the first try... lots of us have issues with them lining up since there are so many options out there... If it's 4WD then add the drag link too..
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
|
|
|
|
12-25-2008, 05:37 PM
|
#3 |
|
Young Gun
Join Date: Aug 2008
Location: Waupaca, Wi
Posts: 192
|
Re: Power Steering
4wd sorry forgot to mention that
|
|
|
|
|
12-25-2008, 06:58 PM
|
#4 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Power Steering
First of all the 73-87 trucks have long water pumps and brackets. They will not mix with 72 and down truck engines. If your alternator is on the drivers side, you have a short pump and will need short pump brackets and pulleys. All of the other parts should work.
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 12-25-2008 at 06:59 PM. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
