68 LONG BED to SB Fleet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blakeaz33 · 12-29-2008, 01:36 AM

Decided to start my own build thread - starting with a 68 C10 long bed original paint. This truck was on a peach orchard in Utah and had a topper on it for most of the time. The bed floor is in great shape since it only had peach crates loaded and unloaded so no major dents - just a few scrapes and hickies. I'm planning on fixing the extremely minimal rust and converting this truck to a short bed. Ultimately will be factory red with bags but I'm doing this one in stages. I've done other projects all at once, media blast, rotisserie, etc, and a couple of years of work. I plan on driving this and enjoying it while I work on it - the rust and short bed conversion will be all at once and the rest one at a time. My grandfather had a 68 that I started driving in high school, he didn't buy it new but he owned it since it was a year or two old - when this truck is done it will represent that truck if I was still fortunate enough to own it today.

blakeaz33 · 12-29-2008, 01:48 AM

The rust on the hinge pillar and rocker panel on the driver side ended up worse than I thought when I first saw it. Removed the rubber mat and will start cutting.

nuke1 · 12-29-2008, 02:06 AM

looks like a great start to a project you ahve ther, that truck is nice and straight, i agree with being able to build and drive, but that never happens to me, i jst seem to go all out or nothing, oh well, my own fault.

blakeaz33 · 12-29-2008, 10:04 AM

Thanks Nuke it really is a pretty straight truck - original six with 3 speed radio delete with no options. The rust on the driver rocker, floor, and hinge area is the worst area. The passenger side is in much better shape and there is small area of bubbles behind the heater motor on the firewall.

blakeaz33 · 12-29-2008, 10:13 AM

Here is the progress on the floor and rocker - cut the rust away to clean metal. The replacement floor patch didn't go back far enough on the back rocker area so I trimmed a piece to fit.

LuckyHenriksen · 12-29-2008, 10:16 AM

Lookin good! Thats a nice clean truck to start with. It would look cool if you left the body as it is and bagged it.

blakeaz33 · 12-29-2008, 10:32 AM

Thanks Lucky - I actually drove it quite a while just like it is trying to decide what to do with it. I always wanted a 68 SB and always wanted to try shortening one so this truck was the perfect candidate. I got a great deal on this so I couln't pass on it - much, much less than a rough SB would have cost me.

caja_larga · 12-29-2008, 01:22 PM

there was a short bed box here in tucson on C-L http://tucson.craigslist.org/cto/963120479.html

I can go look at it for you. Iwas going to go get it but the long bed is growing on me.

blakeaz33 · 12-29-2008, 01:41 PM

Quote:

Originally Posted by caja_larga

there was a short bed box here in tucson on C-L http://tucson.craigslist.org/cto/963120479.html

I can go look at it for you. Iwas going to go get it but the long bed is growing on me.

Appreciate the info - I already started cutting my bed so I'm past point of return on it. Decent price if the bed is in good shape though based on what I seen others sell for.

LuckyHenriksen · 12-29-2008, 02:06 PM

Cool, looking forward to progress pics!

67-72crazy · 12-29-2008, 07:06 PM

keep up the good work.

msgross · 12-29-2008, 07:39 PM

subscribed....

nice looking truck to start with... interesting how it rusted like that....

blakeaz33 · 12-29-2008, 08:57 PM

Quote:

Originally Posted by msgross

subscribed....

nice looking truck to start with... interesting how it rusted like that....

The driver side hinge pillar was all full of debris like it had been parked beneath an overhang of a building with the driver side catching everything - pretty severe rust compared to the condition of the rest of the truck. Here are the finish pictures of this repair.

blakeaz33 · 12-29-2008, 09:01 PM

Here is one before the rocker went on.

blakeaz33 · 12-29-2008, 09:06 PM

Started cutting on the bed - I am going to shorten the long bed instead of buying a SB. No rust or major dents so I have a good part to start with. I have to give a lot of credit to Rokcrln on the thread on LFD's low buck - I'm basically doing the same thing and being able to follow that work will be a great help.

blakeaz33 · 12-29-2008, 09:14 PM

Cutting off the back actually went pretty quick once I got the tape lined up and started cutting.

jayrod8505 · 03-28-2016, 10:53 PM

Quote:

Originally Posted by blakeaz33

Started cutting on the bed - I am going to shorten the long bed instead of buying a SB. No rust or major dents so I have a good part to start with. I have to give a lot of credit to Rokcrln on the thread on LFD's low buck - I'm basically doing the same thing and being able to follow that work will be a great help.

What measurements did you use to cut the bed down? I'm about to attempt to do 2 trucks in the next few months. If I'm lucky one may turn out half as good as yours did.

1LoC10 · 12-29-2008, 09:26 PM

nice...good job so far

LuckyHenriksen · 12-29-2008, 09:49 PM

Wow your cruizin on that bed chop. Doing a great job!

thirdstreettito · 12-29-2008, 11:55 PM

Man, you just mad me mad. You cut up a perfectly good longbed. That just burns my buttons! Us LWB lovers have to hunt down good beds and you cut one up. Sorry if I came off a bit strong, but I just dont get it...

Nice project though.

blakeaz33 · 12-30-2008, 12:31 AM

Quote:

Originally Posted by thirdstreettito

Man, you just mad me mad. You cut up a perfectly good longbed. That just burns my buttons! Us LWB lovers have to hunt down good beds and you cut one up. Sorry if I came off a bit strong, but I just dont get it...

Nice project though.

No worries - LB or SB 2WD or 4WD I like them all when someone cares enough to do something with one and drive it. Maybe the work will help keep it on the road another 40 years - building this one to keep.

LuckyHenriksen · 12-30-2008, 12:13 AM

Dont worry about it, keep cuttin'! Your making it look easy

VA72C10 · 12-30-2008, 02:14 AM

I love LWB as well, but completely understand cutting up this one...drive what you want and use good parts when you have them.

72BlckButy · 12-30-2008, 09:01 AM

Great looking project! Definitely subscribing to this one...

Rokcrln · 12-30-2008, 09:38 AM

No fair you started with a much better truck! Your work is looking great and this way of doing body mods really is the basic step to allot more fun projects.
Here is another use for the same basic steps

Kevin
LFD Inc.

12-29-2008, 01:36 AM	#1
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	68 LONG BED to SB Fleet Decided to start my own build thread - starting with a 68 C10 long bed original paint. This truck was on a peach orchard in Utah and had a topper on it for most of the time. The bed floor is in great shape since it only had peach crates loaded and unloaded so no major dents - just a few scrapes and hickies. I'm planning on fixing the extremely minimal rust and converting this truck to a short bed. Ultimately will be factory red with bags but I'm doing this one in stages. I've done other projects all at once, media blast, rotisserie, etc, and a couple of years of work. I plan on driving this and enjoying it while I work on it - the rust and short bed conversion will be all at once and the rest one at a time. My grandfather had a 68 that I started driving in high school, he didn't buy it new but he owned it since it was a year or two old - when this truck is done it will represent that truck if I was still fortunate enough to own it today. Attached Images

12-29-2008, 01:48 AM	#2
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	Re: 68 LONG BED to SB Fleet The rust on the hinge pillar and rocker panel on the driver side ended up worse than I thought when I first saw it. Removed the rubber mat and will start cutting. Attached Images

12-29-2008, 02:06 AM	#3
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 68 LONG BED to SB Fleet looks like a great start to a project you ahve ther, that truck is nice and straight, i agree with being able to build and drive, but that never happens to me, i jst seem to go all out or nothing, oh well, my own fault. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

12-29-2008, 10:04 AM	#4
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	Re: 68 LONG BED to SB Fleet Thanks Nuke it really is a pretty straight truck - original six with 3 speed radio delete with no options. The rust on the driver rocker, floor, and hinge area is the worst area. The passenger side is in much better shape and there is small area of bubbles behind the heater motor on the firewall. Attached Images

12-29-2008, 10:13 AM	#5
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	Re: 68 LONG BED to SB Fleet Here is the progress on the floor and rocker - cut the rust away to clean metal. The replacement floor patch didn't go back far enough on the back rocker area so I trimmed a piece to fit. Attached Images

12-29-2008, 10:16 AM	#6
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: 68 LONG BED to SB Fleet Lookin good! Thats a nice clean truck to start with. It would look cool if you left the body as it is and bagged it. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-29-2008, 10:32 AM	#7
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	Re: 68 LONG BED to SB Fleet Thanks Lucky - I actually drove it quite a while just like it is trying to decide what to do with it. I always wanted a 68 SB and always wanted to try shortening one so this truck was the perfect candidate. I got a great deal on this so I couln't pass on it - much, much less than a rough SB would have cost me.

12-29-2008, 01:22 PM	#8
caja_larga Registered User Join Date: Oct 2007 Location: Tucson, Az Posts: 172	Re: 68 LONG BED to SB Fleet there was a short bed box here in tucson on C-L http://tucson.craigslist.org/cto/963120479.html I can go look at it for you. Iwas going to go get it but the long bed is growing on me.

12-29-2008, 02:06 PM	#10
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: 68 LONG BED to SB Fleet Cool, looking forward to progress pics! __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-29-2008, 07:06 PM	#11
67-72crazy Registered User Join Date: Jan 2008 Location: greenfield indiana Posts: 241	Re: 68 LONG BED to SB Fleet keep up the good work. __________________ 1991 1500 longbed: my daily driver 1937 chevy 2dr sedan. dads project

12-29-2008, 07:39 PM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 LONG BED to SB Fleet subscribed.... nice looking truck to start with... interesting how it rusted like that.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

12-29-2008, 09:01 PM	#14
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	Re: 68 LONG BED to SB Fleet Here is one before the rocker went on. Attached Images

12-29-2008, 09:06 PM	#15
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	Re: 68 LONG BED to SB Fleet Started cutting on the bed - I am going to shorten the long bed instead of buying a SB. No rust or major dents so I have a good part to start with. I have to give a lot of credit to Rokcrln on the thread on LFD's low buck - I'm basically doing the same thing and being able to follow that work will be a great help. Attached Images

12-29-2008, 09:14 PM	#16
blakeaz33 Registered User Join Date: Nov 2007 Location: Scottsdale, AZ Posts: 152	Re: 68 LONG BED to SB Fleet Cutting off the back actually went pretty quick once I got the tape lined up and started cutting. Attached Images

12-29-2008, 09:26 PM	#18
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: 68 LONG BED to SB Fleet nice...good job so far __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<



Register or Log In To remove these advertisements.

12-29-2008, 09:49 PM	#19
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: 68 LONG BED to SB Fleet Wow your cruizin on that bed chop. Doing a great job! __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-29-2008, 11:55 PM	#20
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 68 LONG BED to SB Fleet Man, you just mad me mad. You cut up a perfectly good longbed. That just burns my buttons! Us LWB lovers have to hunt down good beds and you cut one up. Sorry if I came off a bit strong, but I just dont get it... Nice project though. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck Last edited by thirdstreettito; 12-29-2008 at 11:55 PM.

12-30-2008, 12:13 AM	#22
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: 68 LONG BED to SB Fleet Dont worry about it, keep cuttin'! Your making it look easy __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-30-2008, 02:14 AM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 68 LONG BED to SB Fleet I love LWB as well, but completely understand cutting up this one...drive what you want and use good parts when you have them. __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-30-2008, 09:01 AM	#24
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 68 LONG BED to SB Fleet Great looking project! Definitely subscribing to this one... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-30-2008, 09:38 AM	#25
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: 68 LONG BED to SB Fleet No fair you started with a much better truck! Your work is looking great and this way of doing body mods really is the basic step to allot more fun projects. Here is another use for the same basic steps Kevin LFD Inc.

Register or Log In To remove these advertisements.