Need short BBC valve covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Inthuwind · 01-02-2009, 10:29 PM

Anybody have some old ones laying around with 1 1/4 inch breather holes? I preferred not dented. Thanks in advance and price/pics would be appreciated to 79602.

bbarooo · 01-02-2009, 10:52 PM

I have a set but I will have to measure the breather holes. Was 1 1/4" standard?

1968SWBBigBlock · 01-02-2009, 10:59 PM

Ditto

Inthuwind · 01-02-2009, 11:10 PM

I believe so-thanks.

01-02-2009, 10:29 PM	#1
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Need short BBC valve covers Anybody have some old ones laying around with 1 1/4 inch breather holes? I preferred not dented. Thanks in advance and price/pics would be appreciated to 79602. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-02-2009, 10:52 PM	#2
bbarooo Registered User Join Date: Sep 2004 Location: So. California Posts: 121	Re: Need short BBC valve covers I have a set but I will have to measure the breather holes. Was 1 1/4" standard?

01-02-2009, 10:59 PM	#3
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Need short BBC valve covers Ditto __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

01-02-2009, 11:10 PM	#4
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Need short BBC valve covers I believe so-thanks. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.