Best plug for tired engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slik69 · 01-05-2009, 06:30 PM

I am wondering what's the best plug to run in my tired dog. I am building new motor, but I need this thing running better in the meantime. It's running ok, but seems to be using very very much gas. I mean a lot considering how far I have driven it. It's an old 327. Does anyone know where thes liked to be timed. I have a quadrajet carb and HEI. I just think I have plug issues that could be contributing to this. I don't know if they should be hot or cold plug. I am getting mixed information.

Tired motor, little blow-by, no white smoke from tailpipes, runs good. Idles poor. Have to drop her in drive at stop light sometimes not because it will shut off, but because you know it shoudl be idling better. A friend of mine thinks the motor is good, but I suspect it's tired.

heavy71chevy · 01-05-2009, 07:34 PM

what size is the carb? sounds like it might be running abit rich or needs a tune up

lowriden58 · 01-05-2009, 08:06 PM

how old are the plugs/wires/cap/rotor?? whats the timing set at? fuel filter been changed recently?

Slik69 · 01-05-2009, 08:16 PM

quadrajet carb, new cap wires plugs, vac advance module. Dist was used.

lowriden58 · 01-05-2009, 08:30 PM

whats the timing set at?

Slik69 · 01-05-2009, 09:04 PM

I believe between 6-8 initial. The carb shop set it for me.

01-05-2009, 06:30 PM	#1
Slik69 Registered User Join Date: Sep 2008 Location: Ogden Utah Posts: 286	Best plug for tired engine I am wondering what's the best plug to run in my tired dog. I am building new motor, but I need this thing running better in the meantime. It's running ok, but seems to be using very very much gas. I mean a lot considering how far I have driven it. It's an old 327. Does anyone know where thes liked to be timed. I have a quadrajet carb and HEI. I just think I have plug issues that could be contributing to this. I don't know if they should be hot or cold plug. I am getting mixed information. Tired motor, little blow-by, no white smoke from tailpipes, runs good. Idles poor. Have to drop her in drive at stop light sometimes not because it will shut off, but because you know it shoudl be idling better. A friend of mine thinks the motor is good, but I suspect it's tired.

01-05-2009, 07:34 PM	#2
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: Best plug for tired engine what size is the carb? sounds like it might be running abit rich or needs a tune up __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

01-05-2009, 08:06 PM	#3
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: Best plug for tired engine how old are the plugs/wires/cap/rotor?? whats the timing set at? fuel filter been changed recently? __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

01-05-2009, 08:16 PM	#4
Slik69 Registered User Join Date: Sep 2008 Location: Ogden Utah Posts: 286	Re: Best plug for tired engine quadrajet carb, new cap wires plugs, vac advance module. Dist was used.

01-05-2009, 08:30 PM	#5
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: Best plug for tired engine whats the timing set at? __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

01-05-2009, 09:04 PM	#6
Slik69 Registered User Join Date: Sep 2008 Location: Ogden Utah Posts: 286	Re: Best plug for tired engine I believe between 6-8 initial. The carb shop set it for me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.