A few motors and parts for sale.

[cjracing15]

Ok first up is a 1990 tbi long block. This motor is one I pulled from a suburban that I bought for parts for my 4.3 to 350 swap in my 86 K-10 It has 120,000 miles on it. Ran good when I took it out of the burban. 150.00 oboSOLD!!





Second up is a 77 or 78 350 I can not remeber witch. Came out of a lwb GMC truck I bought for parts on another project that I was working on this is what is left this motor. It appers to be a virgn block that has never been into. As you can see it is complete except carb and dist. Comes with what you see. 200.00 obo
[ATTACH][/ATTACH]

[cjracing15]

Third up is a 86 4.3 out of my 86 K-10. The motor is very clean and ran very well when I took it out of the truck. If I had wanted to have this truck as a daliy driver I would have left this motor in it. It has less that 110,000 miles on it. I think it was 102,000 but I can not remember. 150.00 obo


Forth up is a couple of 350 transmissions. The short shaft is a good runner and the long shaft is just a good case. 100.00 for both or will sell separate for 75.00 and 25.00. Complete trans is SOLD!!!


Fifth up is a performer TBI intake for a carb. I used this for a little over a year and a half. Noting at all wrong with it you see it as it came off of my truck. I used this untill I was ready to swap on the tbi system in my 86. This is the right intake to use if you are going to swap TBI to a Carb.
40.00 Firm plus shipping. (You will pay 130.00 for new)

[cjracing15]

Last up is the hei that I was using in my truck before I started the TBI swap. It is an orginal esc distrbutor but I converted it to the orignal four prong module. So it has a nearly new pick-coil and module. 30.00 SOLD!!!




I will ship the intake and disributor, everything else is loacal pick-up.

Thanks for looking,
Jamie

[cjracing15]

Update.

[trenchwarfare]

I may be interested in the TBI to carb.

[cjracing15]

Originally Posted by trenchwarfare

I may be interested in the TBI to carb.

All I need is a zip and I will get you a qoute on the shipping.
Thanks Jamie

[ChillFactor]

You wouldn't happen to have the carb off the 4.3 for sale would you?

[cjracing15]

Originally Posted by ChillFactor

You wouldn't happen to have the carb off the 4.3 for sale would you?

Sorry it is gone. Thanks

[cjracing15]

Update!!

[centexan]

If you still have it, the distributor to 78758. Thanks

[cjracing15]

Originally Posted by centexan

If you still have it, the distributor to 78758. Thanks

I have one guy in front of you, if he backs out I will let you know.
Thanks, Jamie

[centexan]

Originally Posted by cjracing15

I have one guy in front of you, if he backs out I will let you know.
Thanks, Jamie

Thanks, just let me know.

[cjracing15]

Update

I still have the intake, Distributor, 77-78 350, (86 4.3 motor Make offer).
Thanks, Jamie

[spudz]

interested in selling the ac compressor and ac brackets off the 78 motor??? if so how much and shipping quote to 29432 sc.. also for ****s and giggles give me a price quote on the TBI to carb intake..thanks!!!

[cjracing15]

Originally Posted by spudz

interested in selling the ac compressor and ac brackets off the 78 motor??? if so how much and shipping quote to 29432 sc.. also for ****s and giggles give me a price quote on the TBI to carb intake..thanks!!!

On the intake I will do 50.00 shipped to you. I will take 30.00 plus actuall shipping for the ac comp. and brackets. Just let me know.
Thanks

[Prong]

If he doesn't want the intake for $50 shipped, I'll take it assuming this will fit all the centerbolt/vortec heads? PM me and let me know.

[69 COPO]

cjracing15
Should have the money for the Distributor now. Send soon as you can.
Thanks Copo

[cjracing15]

Originally Posted by 69 COPO

cjracing15
Should have the money for the Distributor now. Send soon as you can.
Thanks Copo

I will ship it to you tomarow through fed-ex. (sounds like you need it) It works great it has a new pick-up coil, modgule, cap and rotor, and has no slop. I think you will be plealsed.

Thanks, Jamie

[cjracing15]

Originally Posted by Prong

If he doesn't want the intake for $50 shipped, I'll take it assuming this will fit all the centerbolt/vortec heads? PM me and let me know.

This intake will NOT work on the 96-99 vortec heads. But it will work on 87-95 tbi heads. let me know.

[xs-style]

how much would it take to ship the '86 4.3 to 28042?

[cjracing15]

Originally Posted by xs-style

how much would it take to ship the '86 4.3 to 28042?

I will have to get back to ya on that. Give me a coulpe of days. Where in NC do you live maybe we can meet some where on I-40

[xs-style]

Im in Fallston.My house is only about 20 minutes from 40, and about 2 hours on 40 from the TN state line.

[cjracing15]

Well,l I will check on the shipping of the motor. That would be a good drive just for you to get to the state line. I will let you know.
Jamie

[xs-style]

Go ahead and check on shipping, but if shipping is pretty high I have another option. Ill be travelling through TN on the 21st and 22nd. From the way things look so far, Ill be going as far as Nashville before turning up and going into KY. Im going to be renting a vehicle for the trip anyhow, so renting a truck wouldnt make much difference. Just a thought. Im sure we can work something out.

[cjracing15]

Originally Posted by xs-style

Go ahead and check on shipping, but if shipping is pretty high I have another option. Ill be travelling through TN on the 21st and 22nd. From the way things look so far, Ill be going as far as Nashville before turning up and going into KY. Im going to be renting a vehicle for the trip anyhow, so renting a truck wouldnt make much difference. Just a thought. Im sure we can work something out.

Well I am going to be out of town the weekend of the 21st (dang it) you woudn't happen to be coming back through the same way are you. Say like the 23rd? Nashville or some where between Nashville and Knoxville would not be out of the question if we can figure out a way to meet up. just let me know ether right here or you can P.M. me.

Thanks,Jamie