Portland craigslist deals galore!

[Oregoon]

It's after the holidays and everyone's broke. Thought I share in case someone's hunting... If they were mine, I'd keep 'em all!

Short wides are growing on me. And for $1500, it looks pretty clean. http://portland.craigslist.org/mlt/cto/985408499.html

Who doesn't want a panel? http://portland.craigslist.org/mlt/cto/985374451.html

A strong runner for $950? http://portland.craigslist.org/mlt/cto/985595809.html

Two for $2K? http://portland.craigslist.org/clc/cto/982386958.html

[joeys66pickup]

sad to say mines up there....well parts of it anyway

[66farmer]

Mr Oregoon
Did you see the 65 chopped on CL for $1000, talked to the guy these morning thought it would have the body and drop parts I need but, no go.

[joeys66pickup]

i thought my 65's cab just sitting on my garages floor was a waste but that chopped one hurt to see.The chopped,channeled look isnt really one that goes with these years to much is it

[kenny_strong]

Too bad i'm 3000 miles away. I would take the flat bed for 950

[ChiefRocka]

If that happened to be a Suburban.....I would of taken a drive up North !!

[Oregoon]

Yep, I saw that chop job. Not a fan.

[Oklahoma]

Man I would love to have the wheels of the short wide for 1500.00$ I have been looking for ever and cant find any.

[Oregoon]

Same here! I was thinking of emailing the dude and seeing if he'd part with 'em. After torque thrusts, those old slot mags are my all-time fave.

Too bad I'm going to five-lugs soon...

[65-65]

Originally Posted by Oklahoma

Man I would love to have the wheels of the short wide for 1500.00$ I have been looking for ever and cant find any.

As stated below, You must be a subscribing member to make "For Sale" posts.

XIV. As of October 15th 2005 subscribing members will be the only ones permitted to post for sale and want to buy ads on any classified section of this site. All other rules of buying and selling still apply. 67-72chevytrucks.com, its administrators or staff are not responsible for any transactions on or off the forums. We will work hard to ensure you a smooth transaction, and help in the event you may need it, but all for sale and trade areas are buyer beware. Any persons who have misrepresented an item, lie about an item, fail to deliver, or are in violation of any of the rules will forfeit there subscription fees and be banned from 67-72chevytrucks.com

[joe231]

Originally Posted by 65-65

I have a set of those wheels I'd part with,,6 lug,Factory 70's Jeep Wagoner fit perfect,,,swaping to 5 lug,,only catch is I'm in Mass.

just so you know.....you must be a site supporter to post anything "for sale"

[ratskin]

Originally Posted by Oklahoma

Man I would love to have the wheels of the short wide for 1500.00$ I have been looking for ever and cant find any.

Oklahoma, you have mail!

[mr48chev]

Had to go back and look on the wheels but those are some of my favorites for these trucks too.
Those look to be some decent deals on some decent project starter trucks.

[protrash64]

I looked at a set of those wheels last summer. They were perfect and cheap BUT....I dont know what the deal is......it seems all those wheels have only about 3.5" of backspace. If you're not low its not an issue, but if you are low and have a disc conversion you will be into yur fenders, at least with some real rubber under there. Look how close that front tire is on the red truck.

I dont know if you can mill the back of those wheels to gain some backspace.

[Oregoon]

I'll be using a '71 rear axle soon, so that type of wheel (or any with a lot of backspace) won't be in the cards.

Good thing I like stock steelies with bullet caps and beauty rings.

[Oregoon]

http://portland.craigslist.org/mlt/cto/1188462393.html

[Corts60]

Originally Posted by Oregoon

http://portland.craigslist.org/mlt/cto/1188462393.html

I was thinking about looking at that one this weekend while I'm in Portland. I want a suburban sooooo Bad!

[joe231]

damn...gone already!!