How to remove wire connectors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jokers69** · 01-10-2009, 01:54 AM

How do you remove the male spade conectors from the bulkhead connection. The ignition wire that come out of the firewall broke off at the bulkhead connector. I pulled the bulkhead apart but I can't get the male spade to come out to fix the wire. Thanks

PanelDeland · 01-10-2009, 09:34 AM

Look at it very carefully.You can put a very small screwdriver in the connector and slip the spade right out.Awwwww heck

Here's a better link it's about HEI but tells how to replace the resistor wire which is the part you want to read andmember "shifty" even gives a part # for the spade terminal you need.Buy extry so you don't have to go back.

Green Machine · 01-10-2009, 12:04 PM

That is the terminal with the little "leg" on it right ? If so, just use a side cutter to snip the leg at the top where it connects to the larger part. It will slip right out. Get a replacemnt terminal from NAPA. After you get it fixed, fill the holes on the back side with some liquid electical tape stuff to keep it sealed up.

PanelDeland · 01-10-2009, 12:16 PM

OOps,just realized I forgot the link

http://67-72chevytrucks.com/vboard/s...d.php?t=148346

**Jokers69** · 01-10-2009, 05:51 PM

Thanks guys worked well

01-10-2009, 01:54 AM	#1
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	How to remove wire connectors How do you remove the male spade conectors from the bulkhead connection. The ignition wire that come out of the firewall broke off at the bulkhead connector. I pulled the bulkhead apart but I can't get the male spade to come out to fix the wire. Thanks

01-10-2009, 09:34 AM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: How to remove wire connectors Look at it very carefully.You can put a very small screwdriver in the connector and slip the spade right out.Awwwww heck Here's a better link it's about HEI but tells how to replace the resistor wire which is the part you want to read andmember "shifty" even gives a part # for the spade terminal you need.Buy extry so you don't have to go back. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-10-2009, 12:04 PM	#3
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: How to remove wire connectors That is the terminal with the little "leg" on it right ? If so, just use a side cutter to snip the leg at the top where it connects to the larger part. It will slip right out. Get a replacemnt terminal from NAPA. After you get it fixed, fill the holes on the back side with some liquid electical tape stuff to keep it sealed up. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

01-10-2009, 12:16 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: How to remove wire connectors OOps,just realized I forgot the link http://67-72chevytrucks.com/vboard/s...d.php?t=148346 __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-10-2009, 05:51 PM	#5
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: How to remove wire connectors Thanks guys worked well



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.