Just a couple pics of my blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

v8blaze · 01-11-2009, 02:56 PM

As the title says, nothing special just a few new pictures of my blazer i thought i would share. Its a daily driver and a constant work in progress, so its not always clean lol. Let me know what you think

The last picture is a shot of my new upholstery just sitting ontop the seat. Its still not installed ive got to do a little foam work. Its a later model seat for my bodystyle and they started making the seats more form fitting so i need to add some foam to get it to fill out the older style cover. Its one of those need a good warm day to mess with it and havent had one in a while.

tyler

Myself · 01-12-2009, 05:38 PM

How much is it lowered? V8 I guess? Give us some more detail. I like it, one day I'll get around to posting pics of mine.

v8blaze · 01-12-2009, 05:53 PM

The front is laying skidplate with suicidedoors tubular arms and slam specialty bags and 2 inch drop spindles. It has about a 2and a 1/4 inch tie rod notch into the frame also. The rear has a 4 inch drop, but the leafs have sag'd over the last year or so, its probably closer to a 5 inch drop. But as of today i should have a 4 link on the way for the rear to get it as low as the front. The engine is nothing fancy just a base model gm crate motor, the older 260 hp, 350 ft lbs of torque, with a TCI th350 trans and a stock nearly broken rear end lol.Glad you like it, please post pics of yours.

v8blaze · 01-12-2009, 06:03 PM

also it has a 68 chevy dashboard, ive got some better pictures of it but my phone isnt working right at the moment. But the dash is a work in progress so alot of the welds are fully smoothed out and the guage cluster isnt finished either, butyou get the idea

gchemist · 01-12-2009, 08:46 PM

WAZZUP with the instrument bezel? Nice v-8 conversion.

v8blaze · 01-12-2009, 10:15 PM

what ya mean, its shortend 1.5 inches on either side of the cluster, it all still works in my truck too

Arad68 · 01-13-2009, 12:55 AM

I like that dash idea!!!!!

FlartBastinSr · 01-17-2009, 12:29 AM

Quote:

Originally Posted by Arad68

I like that dash idea!!!!!

Nice tribute to it's older bigger brother

v8blaze · 01-13-2009, 01:19 AM

thanks, the entire dash has almost 13 inches taken out of it, its 1.5 on either side of the gaues, 6 and 3/4s or so out the center, and then 3 out of the glovebox. I had to make the sides to meet up with the a-pillars of the s10. Ive got the dash pad frame all cut down to fit just need to put some new studs on it and rewrap it

Dying2Live · 01-13-2009, 02:04 AM

Nice ride blaze, that dash looks great!!

67ChevyRedneck · 01-14-2009, 01:48 AM

Cool blazer man! Love the dash!

v8blaze · 01-14-2009, 06:56 AM

thanks fellas

v8blaze · 01-15-2009, 09:06 PM

just a better pic of my dash and another outside shot for the hell of it.

v8blaze · 01-17-2009, 12:38 AM

yea, im pretty happy with how its turned out so far. My little wiring ribbon on the guage cluster is severly beat up and the copper strips where the plug clips in are coming unlaminted leaving me without gauge lights so that kinda sucks, but so far ive got almost no money into doing it as i got the dash for free. Ive also got a four link for the rear coming too.

thanks for the kind words.

01-11-2009, 02:56 PM	#1
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Just a couple pics of my blazer As the title says, nothing special just a few new pictures of my blazer i thought i would share. Its a daily driver and a constant work in progress, so its not always clean lol. Let me know what you think The last picture is a shot of my new upholstery just sitting ontop the seat. Its still not installed ive got to do a little foam work. Its a later model seat for my bodystyle and they started making the seats more form fitting so i need to add some foam to get it to fill out the older style cover. Its one of those need a good warm day to mess with it and havent had one in a while. tyler Attached Images

01-12-2009, 05:38 PM	#2
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,142	Re: Just a couple pics of my blazer How much is it lowered? V8 I guess? Give us some more detail. I like it, one day I'll get around to posting pics of mine.

01-12-2009, 05:53 PM	#3
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Re: Just a couple pics of my blazer The front is laying skidplate with suicidedoors tubular arms and slam specialty bags and 2 inch drop spindles. It has about a 2and a 1/4 inch tie rod notch into the frame also. The rear has a 4 inch drop, but the leafs have sag'd over the last year or so, its probably closer to a 5 inch drop. But as of today i should have a 4 link on the way for the rear to get it as low as the front. The engine is nothing fancy just a base model gm crate motor, the older 260 hp, 350 ft lbs of torque, with a TCI th350 trans and a stock nearly broken rear end lol.Glad you like it, please post pics of yours. Attached Images

01-12-2009, 06:03 PM	#4
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Re: Just a couple pics of my blazer also it has a 68 chevy dashboard, ive got some better pictures of it but my phone isnt working right at the moment. But the dash is a work in progress so alot of the welds are fully smoothed out and the guage cluster isnt finished either, butyou get the idea Attached Images

01-12-2009, 08:46 PM	#5
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Just a couple pics of my blazer WAZZUP with the instrument bezel? Nice v-8 conversion. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

01-12-2009, 10:15 PM	#6
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Re: Just a couple pics of my blazer what ya mean, its shortend 1.5 inches on either side of the cluster, it all still works in my truck too

01-13-2009, 12:55 AM	#7
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: Just a couple pics of my blazer I like that dash idea!!!!! __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

01-13-2009, 01:19 AM	#9
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Re: Just a couple pics of my blazer thanks, the entire dash has almost 13 inches taken out of it, its 1.5 on either side of the gaues, 6 and 3/4s or so out the center, and then 3 out of the glovebox. I had to make the sides to meet up with the a-pillars of the s10. Ive got the dash pad frame all cut down to fit just need to put some new studs on it and rewrap it

01-13-2009, 02:04 AM	#10
Dying2Live Registered User Join Date: Jan 2009 Location: Seligman, Missouri Posts: 102	Re: Just a couple pics of my blazer Nice ride blaze, that dash looks great!!

01-14-2009, 01:48 AM	#11
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Just a couple pics of my blazer Cool blazer man! Love the dash! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-14-2009, 06:56 AM	#12
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Re: Just a couple pics of my blazer thanks fellas

01-15-2009, 09:06 PM	#13
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Re: Just a couple pics of my blazer just a better pic of my dash and another outside shot for the hell of it. Attached Images

01-17-2009, 12:38 AM	#14
v8blaze Registered User Join Date: Dec 2008 Location: baton rouge, LA Posts: 77	Re: Just a couple pics of my blazer yea, im pretty happy with how its turned out so far. My little wiring ribbon on the guage cluster is severly beat up and the copper strips where the plug clips in are coming unlaminted leaving me without gauge lights so that kinda sucks, but so far ive got almost no money into doing it as i got the dash for free. Ive also got a four link for the rear coming too. thanks for the kind words.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.