|
|
|
01-21-2009, 11:12 PM
|
#1 |
|
still buypickupparts
Join Date: Sep 2003
Location: charlotte
Posts: 637
|
oil pressure gage
so I hooked one of the 4 I have back up and well befor the motor was started the gage wasshowing, umm I'll say 1/4 of the way of pressure if that makes any sence, so when I started the motor the gage pegged out ot max position, could it be the gage in the start was already 1/4 of the way on the scale so it wont read right or am I just dreaming andall the gages read something even if the motor is not running? 2 of the gages I have, the needle is al the way to the left, the other 2 show the needle about a 1/4 of the way on the scale of the gage, so are they good or?
__________________
Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck |
|
|
|
01-21-2009, 11:16 PM
|
#2 |
|
Restoring it $200 at a time...
Join Date: Aug 2008
Location: NE Kansas
Posts: 887
|
Re: oil pressure gage
Should be all the way left when unhooked. On the others, I'd flush 'em and try to clear out whatever is causing the spring to hang up.
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
