Have you ever seen the original build sheets...both of them? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 01-21-2009, 11:56 PM

The factory build sheets were provided on the back of the glove box door, as well as, between the seat springs behind the driver. I have a '66 Chevy K10 with the original build sheet on the glove box door and in the seat springs...still in amazingly good condition.

This information was also provided with the Protecto Plate and owner's literature, but both of these were actually attached to the vehicle, when new, so rather uncommon to still be in good, legible condition.

**ChiefRocka** · 01-22-2009, 08:50 AM

Nice !!!

I found my build sheet behind the seat springs (wasn't a long one

) when I pulled the seat out...Turns out my truck was built in Fremont, CA......Which is only 15 min from where I live !! The plant is still there...but it's called "NUMMI" when Toyota came into the picture years ago.

My truck has been a "CALI" truck all its life !!

72BlckButy · 01-22-2009, 09:05 AM

That is to cool.... the only thing I found behind my seat was $.50 and a pack of smokes.

Joey~AP · 01-22-2009, 09:16 AM

Does the "panoramic cab" mean big window?

*LILRED66* · 01-22-2009, 11:20 AM

Quote:

Originally Posted by Joey~AP

Does the "panoramic cab" mean big window?

Yes, that is correct.

1Bad62Pro/Street · 01-22-2009, 10:22 AM

Quote:

Originally Posted by LILRED66

The factory build sheets were provided on the back of the glove box door, as well as, between the seat springs behind the driver. I have a '66 Chevy K10 with the original build sheet on the glove box door and in the seat springs...still in amazingly good condition.

This information was also provided with the Protecto Plate and owner's literature, but both of these were actually attached to the vehicle, when new, so rather uncommon to still be in good, legible condition.

Hey Bud,

Would you know where one on a 62 would be? The Glove box was dry rotted and had a bird nest in it once...... so we had to replace it.
The seat was bad as well, so we replaces the foam and cover too.

Thanks,

ol Curt · 01-22-2009, 10:44 AM

I have the one from my glove box. I just took the seat out and am going to look there. The one from the glove box is certainly not in pristine shape. The bottom portion of my seat has had the vinyl replaced once, so I'm not sure it would be there. The back is unmolested. Which of those two areas is it usually located in?

*LILRED66* · 01-22-2009, 11:23 AM

Quote:

Originally Posted by ol Curt

I have the one from my glove box. I just took the seat out and am going to look there. The one from the glove box is certainly not in pristine shape. The bottom portion of my seat has had the vinyl replaced once, so I'm not sure it would be there. The back is unmolested. Which of those two areas is it usually located in?

The standard location is in the seat back behind the driver, but it could have ended up anywhere in the seat back. I think it may depend on who put it there and what factory it came from. I'm sure the line workers of the day just thru it in and where it landed is where it landed. I think the build sheet was put in the seat back to make sure the proper seat was matched with the proper truck.

murdoc · 01-22-2009, 05:16 PM

heres mine, was a pain in the a#$ to get out from under the springs considering the shape it was in....

*LILRED66* · 01-22-2009, 10:34 PM

Quote:

Originally Posted by murdoc

heres mine, was a pain in the a#$ to get out from under the springs considering the shape it was in....

murdoc:

A very nice specimen indeed...and well preserved. Thanks for sharing.

*LILRED66* · 01-22-2009, 11:21 AM

Quote:

Originally Posted by 1Bad62Pro/Street

Hey Bud,

Would you know where one on a 62 would be? The Glove box was dry rotted and had a bird nest in it once...... so we had to replace it.
The seat was bad as well, so we replaces the foam and cover too.

Thanks,

Same locations for the '60-'66. I am not sure about other years.

joe231 · 01-22-2009, 11:58 AM

so the build sheet is covered up by the upholstery on the back of the seat?
scavenger hunt time

*LILRED66* · 01-22-2009, 12:08 PM

It was installed between the seat springs and the burlap on the back of the driver side seat back. It will be visible from the back, if it is there, so you don't have to dismantle anything.

joe231 · 01-22-2009, 12:18 PM

our seat is covered on the back, so it must have been recovered at some point......

66customcamper · 01-22-2009, 12:34 PM

I found the one in the seat springs but nothing on the glovebox door.
Haven't looked at it in quite awhile.

*LILRED66* · 01-22-2009, 12:36 PM

Locating one in the seat springs is rare find because the paper dries out and becomes brittle, then it breaks away and goes bye-bye, so good for you if you found yours. I would try to save it by removing it and having it preserved. They are rare indeed still intact.

ol Curt · 01-22-2009, 02:37 PM

Are there places that preserve them? I thought i read about a place awhile back that make some that look like the originals.

*LILRED66* · 01-22-2009, 10:26 PM

Quote:

Originally Posted by ol Curt

Are there places that preserve them? I thought i read about a place awhile back that make some that look like the originals.

Bob:

Here are a few I found that restore old plates:

www.tagdr.com
www.darrylsplates.com
www.mojoartworks.com
www.oldlicensefarm.com

I hope this provides you some options for your plate restoration project, if you need it.

After posting this, I realized I provided restoration services for license plates, not build sheets, but here is a "near-factory" build sheet blank, that can be filled in to meet the specifications of you particular truck. I found mine on eBay, but I was unable to find a link to another one, but they will come up again on eBay, so be on the lookout.

***Liz*** · 01-23-2009, 09:08 AM

Quote:

Originally Posted by ol Curt

Are there places that preserve them? I thought i read about a place awhile back that make some that look like the originals.

member chipflyer on this site reproduces the spid labels for 67-72. he may be able to help

his site
http://outintheshop.com/2.html

66customcamper · 01-22-2009, 02:57 PM

Quote:

Originally Posted by LILRED66

Locating one in the seat springs is rare find because the paper dries out and becomes brittle, then it breaks away and goes bye-bye, so good for you if you found yours. I would try to save it by removing it and having it preserved. They are rare indeed still intact.

Yeah, I'll have to pull it out and have a look now, I'm curious. Can't remember how "intact" it was. If it's decent, I'll try & scan it & post it up.

Oregoon · 01-22-2009, 02:41 PM

Mine came in a manilla folder along with a stack of receipts dating to '76, when the PO bought the truck from the State of California.

62 short step · 01-22-2009, 05:30 PM

Thats cool! Mine has been long gone!

*LILRED66* · 01-23-2009, 08:37 AM

David:

Nice find. I see your truck is originally from Lebanon, MO...ironic, I am from Missouri...small world.

Thanks for sharing.

*LILRED66* · 01-23-2009, 09:49 AM

Liz:

Excellent resource. Thanks for sharing. I have e-mailed Jeff to see if he can do SPID labels for the '60-'66 Chevy trucks. Thanks again for sharing.

factorystock · 01-23-2009, 08:53 PM

SPID's (service parts indentification decal ) were never installed inside the glove box door on 1960 thru 1965 Chevy pickups. This decal was first used in 1966 on Chevy pickups. GMC started using them in 1967.

01-21-2009, 11:56 PM	#1
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Have you ever seen the original build sheets...both of them? The factory build sheets were provided on the back of the glove box door, as well as, between the seat springs behind the driver. I have a '66 Chevy K10 with the original build sheet on the glove box door and in the seat springs...still in amazingly good condition. This information was also provided with the Protecto Plate and owner's literature, but both of these were actually attached to the vehicle, when new, so rather uncommon to still be in good, legible condition. Attached Images

01-22-2009, 08:50 AM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Have you ever seen the original build sheets...both of them? Nice !!! I found my build sheet behind the seat springs (wasn't a long one ) when I pulled the seat out...Turns out my truck was built in Fremont, CA......Which is only 15 min from where I live !! The plant is still there...but it's called "NUMMI" when Toyota came into the picture years ago. My truck has been a "CALI" truck all its life !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-22-2009, 09:05 AM	#3
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Have you ever seen the original build sheets...both of them? That is to cool.... the only thing I found behind my seat was $.50 and a pack of smokes. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-22-2009, 09:16 AM	#4
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: Have you ever seen the original build sheets...both of them? Does the "panoramic cab" mean big window? __________________ Build in progress for son's first truck.

01-22-2009, 10:44 AM	#7
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Have you ever seen the original build sheets...both of them? I have the one from my glove box. I just took the seat out and am going to look there. The one from the glove box is certainly not in pristine shape. The bottom portion of my seat has had the vinyl replaced once, so I'm not sure it would be there. The back is unmolested. Which of those two areas is it usually located in?

01-22-2009, 05:16 PM	#9
murdoc Registered User Join Date: Mar 2008 Location: nampa, idaho Posts: 332	Re: Have you ever seen the original build sheets...both of them? heres mine, was a pain in the a#$ to get out from under the springs considering the shape it was in....

01-22-2009, 11:58 AM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Have you ever seen the original build sheets...both of them? so the build sheet is covered up by the upholstery on the back of the seat? scavenger hunt time __________________ *CHEVY ONLY*

01-22-2009, 12:08 PM	#13
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Have you ever seen the original build sheets...both of them? It was installed between the seat springs and the burlap on the back of the driver side seat back. It will be visible from the back, if it is there, so you don't have to dismantle anything.

01-22-2009, 12:18 PM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Have you ever seen the original build sheets...both of them? our seat is covered on the back, so it must have been recovered at some point...... __________________ *CHEVY ONLY*

01-22-2009, 12:34 PM	#15
66customcamper Registered User Join Date: Apr 2007 Location: southern oregon Posts: 76	Re: Have you ever seen the original build sheets...both of them? I found the one in the seat springs but nothing on the glovebox door. Haven't looked at it in quite awhile. __________________ 66 Custom Camper 327/ 4 spd. Bone Stock, down to the split rims

01-22-2009, 12:36 PM	#16
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Have you ever seen the original build sheets...both of them? Locating one in the seat springs is rare find because the paper dries out and becomes brittle, then it breaks away and goes bye-bye, so good for you if you found yours. I would try to save it by removing it and having it preserved. They are rare indeed still intact. Last edited by LILRED66; 01-22-2009 at 12:37 PM.

01-22-2009, 02:37 PM	#17
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Have you ever seen the original build sheets...both of them? Are there places that preserve them? I thought i read about a place awhile back that make some that look like the originals.

01-22-2009, 02:41 PM	#21
Oregoon Roadside Rebuilder Join Date: Oct 2008 Location: Southeast Portland, OR Posts: 421	Re: Have you ever seen the original build sheets...both of them? Mine came in a manilla folder along with a stack of receipts dating to '76, when the PO bought the truck from the State of California.

01-22-2009, 05:30 PM	#22
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Have you ever seen the original build sheets...both of them? Thats cool! Mine has been long gone! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

01-23-2009, 08:37 AM	#23
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Have you ever seen the original build sheets...both of them? David: Nice find. I see your truck is originally from Lebanon, MO...ironic, I am from Missouri...small world. Thanks for sharing.



Register or Log In To remove these advertisements.

01-23-2009, 09:49 AM	#24
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Have you ever seen the original build sheets...both of them? Liz: Excellent resource. Thanks for sharing. I have e-mailed Jeff to see if he can do SPID labels for the '60-'66 Chevy trucks. Thanks again for sharing.

01-23-2009, 08:53 PM	#25
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: Have you ever seen the original build sheets...both of them? SPID's (service parts indentification decal ) were never installed inside the glove box door on 1960 thru 1965 Chevy pickups. This decal was first used in 1966 on Chevy pickups. GMC started using them in 1967.

Register or Log In To remove these advertisements.