Hello From Washington State - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kamby · 01-23-2009, 03:04 AM

Just registered a few days ago and thought i should say my hello's. Hello.

My name is Jason and i am from Puyallup, WA aprrox 30mi s of seattle.

My truck is a 1972 GMC Custom Camper 3/4 ton. (fender says GMC 2500 Super Custom); Automatic; non dana rear end; non ac; leaf rear suspension; coil front suspension; Small block 350. Single Exhaust, Gm Delco AM radio, original paint and still has chalk marks on the firewall. Interior complete with broken cigarette lighter socket and missing shift indicator thing.

WHat i want/need to do.

I want to paint it Terrace Blue (503 2365 Ditzler Automotive Finishes #) but i am not sure how that is going to on a two tone paint job, want to keep the white parts white. Does any one have a pic of what that color looks like two tone, i may just keep it the color it is, if i can figure out what color that is (sucks being partially color blind) owned an s10 thinking it was grey turns to be a tannish color.
Clean up engine area (Chrome vavle covers paint fender wells fire wall etc.)
New Rear Bumper
New rims or salvage the old ones
New tires
New exhaust dual pipe with healthy rumble, need to do soon so exhaust leak one both sides of the muffler.
Repair or replace front grill and head light trim (spendy items) rusted out, grill not too bad but pitted
Replace upper trim and worn discolored pieces of bottom trim
Replace any other dented or missing chrome
Redo cab corners and fix rot on doors and floor pan, floor pan isnt too bad lmc sell individual pieces i could weld in
Fix cigarette liter
Replace Instrument cluster black cover and clean glass replace lightbulbs (roll back odometer J/K its excempt anyway)
Paint interior either way
New Stering wheel
New shift indicater
New light socket that goes under gear selector
New glove box
Paint Glove box door
new arm rests

I'll shut up now and will be making my own site for this truck to track the progress and i need to take some non snow pictures.

Got a quote of approx 2k for the paint and body work if i supply the replacement sheet metal and gut the interior.

DREAMS OF A 67 · 01-23-2009, 08:05 AM

FROM KNOXVILLE TN!!!

jsbgump · 01-23-2009, 11:33 AM

Welcome to the board from Texas

Cyclone44 · 01-23-2009, 09:28 PM

from Knoxville Tn.....

shaneschevys · 01-23-2009, 11:34 PM

Welcome from FT Worth TX.

TimE · 01-24-2009, 01:09 AM

from south Alabama!!

CHuf · 01-24-2009, 10:47 PM

Welcome from L.NC

72BlckButy · 01-26-2009, 08:45 AM

to the board from Mid-MO!!!

You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.

kamby · 01-26-2009, 02:18 PM

Thanks for the welcome guys this is a great forum. Any guesses on what color that truck is? And any tricks for removing window cranks and door handles i dont see any release pins?

Twisted78SS · 01-26-2009, 02:53 PM

Welcome from another Washington guy!

I am sure you will find lots of suggestions and help along they way. Make sure to stop by the Northwest forum and make plans to meet up with many of us from the area.

http://67-72chevytrucks.com/vboard/f...splay.php?f=55

Good luck with your project!

Drew

Hoods69BadBowTie · 01-28-2009, 02:46 AM

Hey welcome to the best board around from your neighbor in MT. Awesome looking truck. Should look pretty sweet once you get your mods done if you do.

chevguy7 · 01-29-2009, 11:35 AM

Welcome from Seattle!

robmrtnbb5 · 02-01-2009, 11:38 AM

welcome from missouri

mudmizer · 02-02-2009, 01:36 AM

Welcome from Bellingham,WA

krue · 02-04-2009, 05:11 AM

Welcome to the board from South Mississippi!

layenbodyon22s · 01-11-2011, 01:45 AM

did u ever paint it the terrace blue

1ATony · 01-12-2011, 09:41 AM

welcome to the site

droppedgmc · 01-19-2011, 11:37 AM

welcome from soon to back in WA

01-23-2009, 03:04 AM	#1
kamby Registered User Join Date: Jan 2009 Location: Puyallup, WA Posts: 13	Hello From Washington State Just registered a few days ago and thought i should say my hello's. Hello. My name is Jason and i am from Puyallup, WA aprrox 30mi s of seattle. My truck is a 1972 GMC Custom Camper 3/4 ton. (fender says GMC 2500 Super Custom); Automatic; non dana rear end; non ac; leaf rear suspension; coil front suspension; Small block 350. Single Exhaust, Gm Delco AM radio, original paint and still has chalk marks on the firewall. Interior complete with broken cigarette lighter socket and missing shift indicator thing. WHat i want/need to do. I want to paint it Terrace Blue (503 2365 Ditzler Automotive Finishes #) but i am not sure how that is going to on a two tone paint job, want to keep the white parts white. Does any one have a pic of what that color looks like two tone, i may just keep it the color it is, if i can figure out what color that is (sucks being partially color blind) owned an s10 thinking it was grey turns to be a tannish color. Clean up engine area (Chrome vavle covers paint fender wells fire wall etc.) New Rear Bumper New rims or salvage the old ones New tires New exhaust dual pipe with healthy rumble, need to do soon so exhaust leak one both sides of the muffler. Repair or replace front grill and head light trim (spendy items) rusted out, grill not too bad but pitted Replace upper trim and worn discolored pieces of bottom trim Replace any other dented or missing chrome Redo cab corners and fix rot on doors and floor pan, floor pan isnt too bad lmc sell individual pieces i could weld in Fix cigarette liter Replace Instrument cluster black cover and clean glass replace lightbulbs (roll back odometer J/K its excempt anyway) Paint interior either way New Stering wheel New shift indicater New light socket that goes under gear selector New glove box Paint Glove box door new arm rests I'll shut up now and will be making my own site for this truck to track the progress and i need to take some non snow pictures. Got a quote of approx 2k for the paint and body work if i supply the replacement sheet metal and gut the interior.

01-23-2009, 08:05 AM	#2
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: Hello From Washington State FROM KNOXVILLE TN!!! __________________ Joe

01-23-2009, 11:33 AM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Hello From Washington State Welcome to the board from Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

01-23-2009, 09:28 PM	#4
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Hello From Washington State from Knoxville Tn.....

01-23-2009, 11:34 PM	#5
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Hello From Washington State Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

01-24-2009, 01:09 AM	#6
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Hello From Washington State from south Alabama!! __________________ Just hopin' I live long enough to finish something!!!

01-24-2009, 10:47 PM	#7
CHuf Registered User Join Date: Jan 2009 Location: Winston-Salem,NC Posts: 54	Re: Hello From Washington State Welcome from L.NC __________________

01-26-2009, 08:45 AM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hello From Washington State to the board from Mid-MO!!! You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-26-2009, 02:18 PM	#9
kamby Registered User Join Date: Jan 2009 Location: Puyallup, WA Posts: 13	Re: Hello From Washington State Thanks for the welcome guys this is a great forum. Any guesses on what color that truck is? And any tricks for removing window cranks and door handles i dont see any release pins?

01-26-2009, 02:53 PM	#10
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Hello From Washington State Welcome from another Washington guy! I am sure you will find lots of suggestions and help along they way. Make sure to stop by the Northwest forum and make plans to meet up with many of us from the area. http://67-72chevytrucks.com/vboard/f...splay.php?f=55 Good luck with your project! Drew __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

01-28-2009, 02:46 AM	#11
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Hello From Washington State Hey welcome to the best board around from your neighbor in MT. Awesome looking truck. Should look pretty sweet once you get your mods done if you do. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

01-29-2009, 11:35 AM	#12
chevguy7 Registered User Join Date: Oct 2006 Location: Washington Posts: 316	Re: Hello From Washington State Welcome from Seattle! __________________ 1970 C10 - ECE 3.5/5 drop, dual exhaust with turbo mufflers, front discs http://67-72chevytrucks.com/vboard/s...d.php?t=272458 2000 Buick Regal GS - Supercharged 3.8 V6 240hp, 1/4 mile 15 seconds

02-01-2009, 11:38 AM	#13
robmrtnbb5 Registered User Join Date: Nov 2008 Location: archie mo Posts: 2,242	Re: Hello From Washington State welcome from missouri __________________ bondo bob http://s424.photobucket.com/albums/p...albumview=grid <<<link to my stuff and project 68 step side build

02-02-2009, 01:36 AM	#14
mudmizer Registered User Join Date: Jan 2007 Location: Bellingham, washington Posts: 260	Re: Hello From Washington State Welcome from Bellingham,WA __________________ 68 4x4, 454, 4 speed, disk brakes both ends, Sold my 69 SS396 Elcamino when young & stupid

02-04-2009, 05:11 AM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Hello From Washington State Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

01-11-2011, 01:45 AM	#16
layenbodyon22s Registered User Join Date: Jan 2007 Location: south florida Posts: 24	Re: Hello From Washington State did u ever paint it the terrace blue

01-12-2011, 09:41 AM	#17
1ATony Registered User Join Date: Oct 2009 Location: Pepperell,Mass Posts: 724	Re: Hello From Washington State welcome to the site

01-19-2011, 11:37 AM	#18
droppedgmc Truck Enthusiast Join Date: Dec 2006 Location: Arlington, WA Posts: 1,346	Re: Hello From Washington State welcome from soon to back in WA __________________ '85 swb

Register or Log In To remove these advertisements.