Edelbrock carburator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big_al_71 · 01-29-2009, 10:32 AM

I have an Edelbrock Carburator with the air cleaner part#14113143 it came off a 350 that one of my techs had. It was in good working condition when it was taken off, it is all clean. The price for it is $75.00 plus the ride from zip code 33169 it weights less than 10 pound boxed. If interested send me a pm or answer in the thread. thanks...

**ScottH** · 01-29-2009, 10:59 AM

Al, would u know what size (cfm) the carb is?

Thanks.

Scott

big_al_71 · 01-29-2009, 12:58 PM

Quote:

Originally Posted by ScottH

Al, would u know what size (cfm) the carb is?

Thanks.

Scott

Hi Scott
I asked my tech and he says that if he remembers correctly it is a 600 cfm but not 100% sure...
Is there a way I could tell?

**Classic Bowties** · 01-29-2009, 01:03 PM

Quote:

Originally Posted by big_al_71

Hi Scott
I asked my tech and he says that if he remembers correctly it is a 600 cfm but not 100% sure...
Is there a way I could tell?

I think the first four digits of your above listed p/n make it out to be a 750 model.

big_al_71 · 01-29-2009, 04:53 PM

Quote:

Originally Posted by Classic Bowties

I think the first four digits of your above listed p/n make it out to be a 750 model.

Thank you!!!!

Bpokey · 02-02-2009, 08:41 PM

Is it still for sale?

**ScottH** · 01-29-2009, 12:59 PM

I looked for the numbers, and according to what I found a 1411 is a 750 cfm.

Thanks but that's too much of a carb for my needs.

01-29-2009, 10:59 AM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Edelbrock carburator Al, would u know what size (cfm) the carb is? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-02-2009, 08:41 PM	#6
Bpokey Registered User Join Date: Sep 2008 Location: Belle Chasse LA Posts: 147	Re: Edelbrock carburator Is it still for sale?

01-29-2009, 12:59 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Edelbrock carburator I looked for the numbers, and according to what I found a 1411 is a 750 cfm. Thanks but that's too much of a carb for my needs. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 01-29-2009 at 01:00 PM.

01-29-2009, 10:32 AM	#1
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Edelbrock carburator I have an Edelbrock Carburator with the air cleaner part#14113143 it came off a 350 that one of my techs had. It was in good working condition when it was taken off, it is all clean. The price for it is $75.00 plus the ride from zip code 33169 it weights less than 10 pound boxed. If interested send me a pm or answer in the thread. thanks... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.