rustfree doors for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 01-31-2009, 10:29 PM

pulled these from a 69. they are rustfree and have no speaker holes. no cracks around the hinge area. other than the extra mirror holes they are extremely nice doors. complete including door panels, vent windows, windows etc. $250.00 for the pair or $150.00 each. the pics don't do these doors justice, they are very nice.

jlaird · 02-01-2009, 12:44 AM

wish i was in CA!

*67/72junkie* · 02-01-2009, 12:46 AM

Very nice doors for the price Jerry,2 nice original gm for less than 1 aftermarket shell.If they were 72 I would send you the money and swing by and pick them up when I go out there in April.If you come across any 72 doors that are uncut let me know .I don't care if they are complete as long as the shells are uncut and nice.

**Ricks1971** · 02-01-2009, 01:31 AM

gotta bump clean california sheet metal!

70LonghornCST · 02-01-2009, 01:56 AM

I may be interested. What are the bottoms like? Do you know if there is any bondo?

At the least, I need a nice passenger door. Mine has some denting inside near the window. What is the passenger upper inside like near the window? Any dents?

meansting04 · 02-01-2009, 03:14 AM

I am close and very interested. If i can get some pics of the bottoms and how staight is the sheetmetal outside.

2wd73blazer · 02-01-2009, 05:37 AM

What is the difference in the 69 and 72 doors? I havent looked at them that close.

CheySuper8 · 02-01-2009, 08:37 AM

Quote:

Originally Posted by 2wd73blazer

What is the difference in the 69 and 72 doors? I havent looked at them that close.

72 doors have a screw hole with counter sink at the area just behind the vent window where you would rest your arm if the window was down.

**jerry moss** · 02-01-2009, 10:37 AM

the bottoms are very clean too, i'm not a body man but they are very straight just very faded paint. i'll try getting some pics of the bottoms later today-it's still dark outside right now. other than extra mirror holes i don't see any damage. the only damage to the whole truck was a small dent on the driver side front fender and a bowed tailgate. i didn't look too closely at the inside of the bed but it appeared to have had a camper shell on it for a long time.

Wootdog · 02-01-2009, 11:02 AM

Too bad you are on the left coast. I would be all over them.
Kerry

70LonghornCST · 02-01-2009, 02:05 PM

Like I said, I'm interested pending pics of the bottoms. I can get them next weekend on Sunday if needed.

2wd73blazer · 02-01-2009, 06:08 PM

Will you ship these? If so what would it cost to 29860?

**jerry moss** · 02-01-2009, 10:48 PM

here's a bottom picture of one of them. they are both in the same condition so i only took pics of one of them.

70LonghornCST · 02-01-2009, 11:16 PM

Jerry,
I'll take the Passenger side for $150. Picked up next Sunday sound Ok? I may take both then for the $250
PM sent.

meansting04 · 02-02-2009, 03:44 AM

I would like to be second if its an option.

**jerry moss** · 02-02-2009, 10:10 AM

Richard said he will take them both but if he changes his mind i'll let you know. thanks to all who replied. now if i could just find a driver side 72 door in this condition--it would save me filling an ugly 6x9 speaker hole in mine.

70LonghornCST · 02-08-2009, 03:41 PM

Jerry! It was nice to meet you. And thanks for the sweet doors. Hopefully you'll make it up on 3/21 to the Sacramento meet.

**jerry moss** · 02-08-2009, 07:17 PM

Richard,
nice meeting you too, sorry we had to run off so quickly but the GF wanted to take her dogs and the cat out to petco for their yearly shots and unless we get there early the line is way to long. she really hates it when i start talking "trucks", for some reason she thinks i spend too much time talking about them. oh well, she will get over it i guess and i'll bet it'll happen again real soon,lol.
those were a sweet set of doors, i just wish i could find some 72's as nice as those. hope to meet up again in the near future.

70LonghornCST · 02-08-2009, 08:02 PM

I'll keep an eye out for some 72's for you. Maybe I'll see you in Sac. at the meet. Till next time.

01-31-2009, 10:29 PM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	rustfree doors for sale pulled these from a 69. they are rustfree and have no speaker holes. no cracks around the hinge area. other than the extra mirror holes they are extremely nice doors. complete including door panels, vent windows, windows etc. $250.00 for the pair or $150.00 each. the pics don't do these doors justice, they are very nice. Attached Images __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-01-2009, 12:44 AM	#2
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: rustfree doors for sale wish i was in CA!

02-01-2009, 12:46 AM	#3
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: rustfree doors for sale Very nice doors for the price Jerry,2 nice original gm for less than 1 aftermarket shell.If they were 72 I would send you the money and swing by and pick them up when I go out there in April.If you come across any 72 doors that are uncut let me know .I don't care if they are complete as long as the shells are uncut and nice.

02-01-2009, 01:31 AM	#4
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,781	Re: rustfree doors for sale gotta bump clean california sheet metal!

02-01-2009, 01:56 AM	#5
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: rustfree doors for sale I may be interested. What are the bottoms like? Do you know if there is any bondo? At the least, I need a nice passenger door. Mine has some denting inside near the window. What is the passenger upper inside like near the window? Any dents? __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-01-2009, 03:14 AM	#6
meansting04 Registered User Join Date: Aug 2008 Location: travis afb Posts: 304	Re: rustfree doors for sale I am close and very interested. If i can get some pics of the bottoms and how staight is the sheetmetal outside. __________________ 67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!! 70 Chevy C-10, 355, th400, 3.73's 2/4 drop

02-01-2009, 05:37 AM	#7
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: rustfree doors for sale What is the difference in the 69 and 72 doors? I havent looked at them that close.

02-01-2009, 10:37 AM	#9
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: rustfree doors for sale the bottoms are very clean too, i'm not a body man but they are very straight just very faded paint. i'll try getting some pics of the bottoms later today-it's still dark outside right now. other than extra mirror holes i don't see any damage. the only damage to the whole truck was a small dent on the driver side front fender and a bowed tailgate. i didn't look too closely at the inside of the bed but it appeared to have had a camper shell on it for a long time. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-01-2009, 11:02 AM	#10
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,676	Re: rustfree doors for sale Too bad you are on the left coast. I would be all over them. Kerry __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

02-01-2009, 02:05 PM	#11
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: rustfree doors for sale Like I said, I'm interested pending pics of the bottoms. I can get them next weekend on Sunday if needed. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-01-2009, 06:08 PM	#12
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: rustfree doors for sale Will you ship these? If so what would it cost to 29860?

02-01-2009, 10:48 PM	#13
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: rustfree doors for sale here's a bottom picture of one of them. they are both in the same condition so i only took pics of one of them. Attached Images __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-01-2009, 11:16 PM	#14
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: rustfree doors for sale Jerry, I'll take the Passenger side for $150. Picked up next Sunday sound Ok? I may take both then for the $250 PM sent. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 02-01-2009 at 11:26 PM.

02-02-2009, 03:44 AM	#15
meansting04 Registered User Join Date: Aug 2008 Location: travis afb Posts: 304	Re: rustfree doors for sale I would like to be second if its an option. __________________ 67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!! 70 Chevy C-10, 355, th400, 3.73's 2/4 drop

02-02-2009, 10:10 AM	#16
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: rustfree doors for sale Richard said he will take them both but if he changes his mind i'll let you know. thanks to all who replied. now if i could just find a driver side 72 door in this condition--it would save me filling an ugly 6x9 speaker hole in mine. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA



Register or Log In To remove these advertisements.

02-08-2009, 03:41 PM	#17
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: rustfree doors for sale Jerry! It was nice to meet you. And thanks for the sweet doors. Hopefully you'll make it up on 3/21 to the Sacramento meet. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-08-2009, 07:17 PM	#18
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: rustfree doors for sale Richard, nice meeting you too, sorry we had to run off so quickly but the GF wanted to take her dogs and the cat out to petco for their yearly shots and unless we get there early the line is way to long. she really hates it when i start talking "trucks", for some reason she thinks i spend too much time talking about them. oh well, she will get over it i guess and i'll bet it'll happen again real soon,lol. those were a sweet set of doors, i just wish i could find some 72's as nice as those. hope to meet up again in the near future. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-08-2009, 08:02 PM	#19
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: rustfree doors for sale I'll keep an eye out for some 72's for you. Maybe I'll see you in Sac. at the meet. Till next time. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

Register or Log In To remove these advertisements.