The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-10-2002, 05:03 PM   #1
Zumo
Hot Rods For Life
 
Zumo's Avatar
 
Join Date: Sep 2001
Location: Waxahachie, TX
Posts: 3,305
Should I get a big sucking swooshing sound (vacuum) when I pull my gas cap off?

I noticed the "Gas Smell" post and I am having the same type of problems. Should I get a vented cap?
__________________
1968 C10 LWB ****SOLD***
Andy
Viva Los Bicicletas!
Los Muertos Custom Bicycles
Zumo is offline   Reply With Quote
Old 12-10-2002, 05:11 PM   #2
Dim
Tha Russian Canadian
 
Dim's Avatar
 
Join Date: Nov 2000
Location: Lethbridge, AB
Posts: 358
Yes you should.
I've seen tanks with so much pressure that as soon as you twists the cap, it gets shot at you. So i can't see how that much preasure can be good for the tank.
__________________
Dimitri
Lethbridge, Alberta
69 Chevy C10 - (Under Construction)
pos_8@hotmail.com
Dim is offline   Reply With Quote
Old 12-10-2002, 06:12 PM   #3
Southpa
Registered User
 
Southpa's Avatar
 
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,409
I usually get back pressure on hot summer days. Been looking for a vented cap but they seem to be rare as hen's teeth in these parts. I'm using an aftermarket locking cap right now and I sometimes reach back and push in on the gasket to release excess gas fumes while driving.
__________________
1970 GMC 1500 Custom
Original 350/TH350
Victoria, BC, Canada


You can wish in one hand and crap in the other.
See which one gets filled first.
Southpa is offline   Reply With Quote
Old 12-10-2002, 06:17 PM   #4
da-burb
"Ochre Ogre"
 
da-burb's Avatar
 
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
No you shouldn't. The gas caps for 71 and 72 were non-vented and 67-70 were vented. If your cap holds a vacuum or pressure, then the cap is not vented. Either it has become plugged, or it is a 71-72 cap.
__________________

Bowtie Truck Stop Inc.
Mid-West GM Truck Restoration Parts Supplier
Your Key Parts, Auto Metal Direct, Dynacorn,
and Goodmark dealer.
like us @ www.facebook.com/BowtieTruckStop

1971 C-10 Suburban (Ochre)
1971 K-10 Suburban (Ochre)
1972 C-10 Suburban (Ochre)
1972 K-20 Suburban (Yellow- that just aint right!)

Springfield, Minnesota 56087
da-burb is offline   Reply With Quote
Old 12-12-2002, 01:50 PM   #5
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Cool Venting

Getting that much pressure in the tank can cause other problems also. It can starve the carb in hot weather, stubbling when accelarting, and it could colaspe the gas tank in some cases, if you can't find the caps try routing a peice of fuel line some how to vent it.


__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com