WTB: I dont know what its called - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ram-Man · 02-10-2009, 10:14 PM

Anyone have 2 of these? It bolts to the front of the rocker and lower fender.

billsbowtie · 02-11-2009, 12:18 AM

is that part of the ft. cab pillows if so i have 2 new after market ones for $32.00 shipped.

billsbowtie · 02-11-2009, 12:21 AM

i just looked up a pic. of what i have it only has 1 hole where yours has 3 .

Gillnetter · 02-11-2009, 12:33 AM

What are these called and who sells them?

Ram-Man · 02-11-2009, 08:18 AM

Quote:

Originally Posted by Gillnetter

What are these called and who sells them?

I'm not sure if repops are even made.

tommypic · 02-11-2009, 08:20 AM

its goes on the back of the Front Door Pillar . I know I havent seen any repops . I could use some new ones too

Ram-Man · 02-11-2009, 08:33 AM

pic

msgross · 02-11-2009, 09:51 AM

what happens if you don't have them? I don't think that earlier trucks had them....

**Hart_Rod** · 02-11-2009, 11:09 AM

Quote:

Originally Posted by msgross

what happens if you don't have them? I don't think that earlier trucks had them....

That piece bolts to the front cab support. It provides a stable mounting point for the bottom of the front fender. If you don't have them, I would recommend finding some since that new piece is pretty thin.

Edit: Here's a better picture.

my67chevytruck · 02-11-2009, 11:15 AM

if it wasnt for this thread i would not have known about it, as the 67, and the '72 parts truck did not have this... Maybe wes from classic , or John from Tri-plus will chime in.

msgross · 02-11-2009, 11:22 AM

I'm just gonna use the old parts that I cut off to use as a backing then. You could buy another set of A-pillars and make a set...

**Green Machine** · 02-11-2009, 11:57 AM

Someone should have a pair from an old cab, I needed just 1, our cab was missing one, got one from a member here.

**thelonerife** · 02-11-2009, 12:12 PM

I think I have two. 12.00 shipped. My paypal is crrife@bellsouth.net

lmk

Ram-Man · 02-11-2009, 03:17 PM

Quote:

Originally Posted by thelonerife

I think I have two. 12.00 shipped. My paypal is crrife@bellsouth.net

lmk

If you do have them I will paypal you tonight when I get home

67mater · 02-11-2009, 12:42 PM

be aware the part discussed is different from the patch panels pictured. the bolt on part is very thick and sits in the craddle of the patch panel, and that lower pillar patch is sheetmetal. I ended up fabricating a second one for my 4x4 as one was gone. It's for reinforcement, but is about 1/16" thick

Redden05 · 02-11-2009, 01:44 PM

Hey thelonerife, if Ram-Man dosent want them, I will take them.

jb4short · 02-11-2009, 02:01 PM

I haven't seen them made. Just bought a sample from ECE to see what's involved.

**jaros44sr** · 02-11-2009, 03:35 PM

Quote:

Originally Posted by Tri-ProAutomotive

I haven't seen them made. Just bought a sample from ECE to see what's involved.

Build it and they will come...I need two, save me from building a die and stamp

Just stamp the dimple and I'll do the hard work

jb4short · 02-11-2009, 04:04 PM

Quote:

Originally Posted by jaros44sr

Build it and they will come...I need two, save me from building a die and stamp

Just stamp the dimple and I'll do the hard work

We have the '60-'66 that are much more complicated. Three holes, nuts welded on, etc.

my67chevytruck · 02-11-2009, 04:17 PM

hmm, u can have them in production tomorrow right.....

**jaros44sr** · 02-11-2009, 04:39 PM

Quote:

Originally Posted by Tri-ProAutomotive

We have the '60-'66 that are much more complicated. Three holes, nuts welded on, etc.

I'll check them out

**thelonerife** · 02-11-2009, 11:47 PM

Upon closer inspection mine are not so good. good rust on one and a hole rusted on the other. sorry. teeitup might have some.

Gillnetter · 02-12-2009, 12:14 AM

I am surprised nobody reproduces these.I had to rebuild mine.Most people don't know what they are unless you have worked on your lower "A" pillar.

Ram-Man · 02-12-2009, 08:26 AM

Quote:

Originally Posted by thelonerife

Upon closer inspection mine are not so good. good rust on one and a hole rusted on the other. sorry. teeitup might have some.

Thanks for checking. Anyone else? I thought this would have been an easy find.

Gillnetter · 02-12-2009, 12:17 AM

Is there a difference between the left and the right one?

02-10-2009, 10:14 PM	#1
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	WTB: I dont know what its called Anyone have 2 of these? It bolts to the front of the rocker and lower fender. Attached Images __________________ Porterbuilt 8 Lugger http://67-72chevytrucks.com/vboard/s...d.php?t=691739

02-11-2009, 12:18 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: I dont know what its called is that part of the ft. cab pillows if so i have 2 new after market ones for $32.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

02-11-2009, 12:21 AM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: I dont know what its called i just looked up a pic. of what i have it only has 1 hole where yours has 3 . __________________ i have 67/72 chevy truck parts f/s.

02-11-2009, 12:33 AM	#4
Gillnetter Registered User Join Date: Oct 2005 Location: Vancouver B.C. Posts: 286	Re: WTB: I dont know what its called What are these called and who sells them? __________________ 1972 Blazer CST Dark Olive, am/fm, tilt, tow hooks, tach dash 1972 SWB C-10 Highlander Blue/White 1972 Canadian 2wd Jimmy light olive 1970 SWB 4x4 4 speed 307

02-11-2009, 08:20 AM	#6
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: WTB: I dont know what its called its goes on the back of the Front Door Pillar . I know I havent seen any repops . I could use some new ones too Attached Images __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2 Last edited by tommypic; 02-11-2009 at 08:21 AM.

02-11-2009, 08:33 AM	#7
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	Re: WTB: I dont know what its called pic Attached Images __________________ Porterbuilt 8 Lugger http://67-72chevytrucks.com/vboard/s...d.php?t=691739

02-11-2009, 09:51 AM	#8
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB: I dont know what its called what happens if you don't have them? I don't think that earlier trucks had them.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-11-2009, 11:15 AM	#10
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: WTB: I dont know what its called if it wasnt for this thread i would not have known about it, as the 67, and the '72 parts truck did not have this... Maybe wes from classic , or John from Tri-plus will chime in. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 02-11-2009 at 11:16 AM.

02-11-2009, 11:22 AM	#11
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB: I dont know what its called I'm just gonna use the old parts that I cut off to use as a backing then. You could buy another set of A-pillars and make a set... Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 02-11-2009 at 11:26 AM.

02-11-2009, 11:57 AM	#12
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: WTB: I dont know what its called Someone should have a pair from an old cab, I needed just 1, our cab was missing one, got one from a member here. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

02-11-2009, 12:12 PM	#13
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: WTB: I dont know what its called I think I have two. 12.00 shipped. My paypal is crrife@bellsouth.net lmk __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 02-11-2009 at 12:13 PM.

02-11-2009, 12:42 PM	#15
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: WTB: I dont know what its called be aware the part discussed is different from the patch panels pictured. the bolt on part is very thick and sits in the craddle of the patch panel, and that lower pillar patch is sheetmetal. I ended up fabricating a second one for my 4x4 as one was gone. It's for reinforcement, but is about 1/16" thick __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-11-2009, 01:44 PM	#16
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: WTB: I dont know what its called Hey thelonerife, if Ram-Man dosent want them, I will take them.

02-11-2009, 02:01 PM	#17
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: WTB: I dont know what its called I haven't seen them made. Just bought a sample from ECE to see what's involved.

02-11-2009, 04:17 PM	#20
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: WTB: I dont know what its called hmm, u can have them in production tomorrow right..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470



Register or Log In To remove these advertisements.

02-11-2009, 11:47 PM	#22
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: WTB: I dont know what its called Upon closer inspection mine are not so good. good rust on one and a hole rusted on the other. sorry. teeitup might have some. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

02-12-2009, 12:14 AM	#23
Gillnetter Registered User Join Date: Oct 2005 Location: Vancouver B.C. Posts: 286	Re: WTB: I dont know what its called I am surprised nobody reproduces these.I had to rebuild mine.Most people don't know what they are unless you have worked on your lower "A" pillar. __________________ 1972 Blazer CST Dark Olive, am/fm, tilt, tow hooks, tach dash 1972 SWB C-10 Highlander Blue/White 1972 Canadian 2wd Jimmy light olive 1970 SWB 4x4 4 speed 307

02-12-2009, 12:17 AM	#25
Gillnetter Registered User Join Date: Oct 2005 Location: Vancouver B.C. Posts: 286	Re: WTB: I dont know what its called Is there a difference between the left and the right one? __________________ 1972 Blazer CST Dark Olive, am/fm, tilt, tow hooks, tach dash 1972 SWB C-10 Highlander Blue/White 1972 Canadian 2wd Jimmy light olive 1970 SWB 4x4 4 speed 307

Register or Log In To remove these advertisements.