Pickup Truck Trailers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOW DOUGH · 02-13-2009, 04:39 PM

So, I was daydreaming about my two trucks and how one (the 69') has a messed up frame. The front shock mount hole is wallered out. And it got me thinking about trailers made out of the rear of a truck. The bed and frame with a tounge welded on.

So, I am woundering if anyone has a trailer made from our year trucks. If you have one or a pic of one post it up. Thanks yall!

**jerry moss** · 02-13-2009, 04:46 PM

here ya go--looks a little different now as i put on a lumber rack and a "hit and run" driver modified the left front between the toolbox and the tire.

LUV2XCLR8 · 02-13-2009, 04:52 PM

Got mine a few months ago for just $40 and it has coil spring overloads

It looks better now, has a repop gate, new wires, & 2" bulldog hitch

big_al_71 · 02-13-2009, 04:57 PM

Seeing these two trailers makes me want one, I would have it painted to match my truck and would even put on matching wheels to my truck...

Good job guys!!!!

LOW DOUGH · 02-13-2009, 05:07 PM

Quote:

Originally Posted by big_al_71

Seeing these two trailers makes me want one, I would have it painted to match my truck and would even put on matching wheels to my truck...

Good job guys!!!!

That is what I have been thinking about. Matching trailer, same wheels, bags maybe. Imagine your truck and trailer laying frame.

Those are great pics guys. Keep them coming.

justcuz · 02-13-2009, 05:22 PM

Mines made out of my 65 chassis, bed and step bumper. I cut it right where the frame kicks up under the firewall. It has great balance and I can move it around empty very easily. I also cut down a boat trailer axle to replace the rear axle housing. Mine has leaf springs, it was converted before I bought it by the previous owner. He converted the truck to 3/4 ton and wanted leaf springs. When I bought it we swapped out the 3/4 ton stuff to 1/2 ton. I drove the truck that way for several years. The rust got real bad and I swapped the a/c cab for another complete truck. Made a trailer out of the remains.

**StingRay** · 02-13-2009, 05:31 PM

I made one for a friend out of a bunch of left over parts once. I can't remember where I made the cuts to pinch the frame but all I did was cut the upper and lower flanges and then fold the rails to a point. I added some square tubing and some gussets at the front so it would accept a standard hitch coupler and it was good to go. It has good balance, tows like a dream and is handy as all he11. I borrow my "parts" back once in a while to haul stuff and I know that I'll make another for myself some day.

Stock72c10 · 02-13-2009, 05:46 PM

Sorry to post a picture of a f**d, but it would be cool if someone would do something like this with a Chevy front end.

67_C-30 · 02-13-2009, 05:57 PM

I got one that I plan to paint to match my red '69 (wheels and all). I would love to camp in it at a board meet one day!!

67_C-30 · 02-13-2009, 06:05 PM

Quote:

Originally Posted by Stock72c10

Sorry to post a picture of a f**d, but it would be cool if someone would do something like this with a Chevy front end.

We have a '64 Chevelle charcoal grill at the shop. We are going to flat black it and put old school flames on it. We used it to cook rib eyes for the Christmas dinner at the shop and it cooks great!

Bishops Trucks · 02-17-2009, 03:50 PM

Quote:

Originally Posted by 67_C-30

We have a '64 Chevelle charcoal grill at the shop. We are going to flat black it and put old school flames on it. We used it to cook rib eyes for the Christmas dinner at the shop and it cooks great!

Tha is what I want to do with some extra parts. Thats very cool.

LOW DOUGH · 02-13-2009, 06:06 PM

^^^^^ Neat

Willys47 · 02-13-2009, 06:13 PM

I found a pic of a cool one

big_al_71 · 02-13-2009, 06:18 PM

Quote:

Originally Posted by LOW DOUGH

That is what I have been thinking about. Matching trailer, same wheels, bags maybe. Imagine your truck and trailer laying frame.

Oh yeah!!!!!!

Those are great pics guys. Keep them coming.

Quote:

Originally Posted by Willys47

I found a pic of a cool one

that is what I am talking about!!!!

jugernot · 02-13-2009, 07:45 PM

Quote:

Originally Posted by Willys47

I found a pic of a cool one

THis actually looks really cool. That was a really sweet truck

LOW DOUGH · 02-13-2009, 06:18 PM

^^^ That is even cooler.

Wait... that is photoshopped.. still neat.

Willys47 · 02-13-2009, 06:31 PM

Quote:

Originally Posted by LOW DOUGH

^^^ That is even cooler.

Wait... that is photoshopped.. still neat.

I think that I will try and make one once my truck in done I think I have enough spare parts to do it.

LOW DOUGH · 02-13-2009, 06:39 PM

Quote:

Originally Posted by thirdstreettito

LOW DOUGH!

You just gave me a great idea! I have a 68 bent frame. A 72 LWB Box that is trashed to h3ll. I'll just make a trailer! You're a genius! Thanks!

Quote:

Originally Posted by Willys47

I think that I will try and make one once my truck in done I think I have enough spare parts to do it.

Do it!

thirdstreettito · 02-13-2009, 06:31 PM

LOW DOUGH!

You just gave me a great idea! I have a 68 bent frame. A 72 LWB Box that is trashed to h3ll. I'll just make a trailer! You're a genius! Thanks!

**rockc** · 02-13-2009, 08:54 PM

I have made several like 67 C-30 posted and would recommed that you make one with leaf springs. The ones made out of the coil bounced and swayed too much.

extd56 · 02-13-2009, 10:50 PM

Here is one that I made out of a 58 Chevy truck, tows great.

67_C-30 · 02-13-2009, 11:45 PM

Quote:

Originally Posted by extd56

Here is one that I made out of a 58 Chevy truck, tows great.

Oh man! I'm loving the front end on there. I foresee one of my parts trucks getting it's nose cut off in the future!

**special-K** · 02-14-2009, 07:48 AM

I have one planned to go with my Stepside 4wd.I have a second bed and want to put it on a leaf spring frame so I can raise it to match the truck.The hitch will pivot.Gotta build the truck first,tho`.

**Boog** · 02-14-2009, 08:05 AM

Those are some neat trailers there. Once I get my truck going maybe I can build one myself.
I agree about the coil springs under the trailer. They might tend to bounce and sway a bit without the weight of the rest of the truck to hold it down. Could be stiff shocks or even a sway bar would keep it under control.

**Hart_Rod** · 02-14-2009, 08:32 AM

My 50th anniversary trailer in the background...............

.

02-13-2009, 04:39 PM	#1
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Pickup Truck Trailers So, I was daydreaming about my two trucks and how one (the 69') has a messed up frame. The front shock mount hole is wallered out. And it got me thinking about trailers made out of the rear of a truck. The bed and frame with a tounge welded on. So, I am woundering if anyone has a trailer made from our year trucks. If you have one or a pic of one post it up. Thanks yall!

02-13-2009, 04:46 PM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,947	Re: Pickup Truck Trailers here ya go--looks a little different now as i put on a lumber rack and a "hit and run" driver modified the left front between the toolbox and the tire. Attached Images __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 02-13-2009 at 04:48 PM. Reason: added info

02-13-2009, 04:52 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Pickup Truck Trailers Got mine a few months ago for just $40 and it has coil spring overloads It looks better now, has a repop gate, new wires, & 2" bulldog hitch __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-13-2009, 04:57 PM	#4
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Pickup Truck Trailers Seeing these two trailers makes me want one, I would have it painted to match my truck and would even put on matching wheels to my truck... Good job guys!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 02-13-2009 at 04:57 PM.

02-13-2009, 05:22 PM	#6
justcuz Registered User Join Date: May 2008 Location: Alta Loma, Ca. Posts: 930	Re: Pickup Truck Trailers Mines made out of my 65 chassis, bed and step bumper. I cut it right where the frame kicks up under the firewall. It has great balance and I can move it around empty very easily. I also cut down a boat trailer axle to replace the rear axle housing. Mine has leaf springs, it was converted before I bought it by the previous owner. He converted the truck to 3/4 ton and wanted leaf springs. When I bought it we swapped out the 3/4 ton stuff to 1/2 ton. I drove the truck that way for several years. The rust got real bad and I swapped the a/c cab for another complete truck. Made a trailer out of the remains.

02-13-2009, 05:31 PM	#7
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: Pickup Truck Trailers I made one for a friend out of a bunch of left over parts once. I can't remember where I made the cuts to pinch the frame but all I did was cut the upper and lower flanges and then fold the rails to a point. I added some square tubing and some gussets at the front so it would accept a standard hitch coupler and it was good to go. It has good balance, tows like a dream and is handy as all he11. I borrow my "parts" back once in a while to haul stuff and I know that I'll make another for myself some day. __________________ Saskatoon, Saskatchewan Canada

02-13-2009, 05:46 PM	#8
Stock72c10 classic=of recognized value Join Date: Sep 2008 Location: Wichita, KS Posts: 317	Re: Pickup Truck Trailers Sorry to post a picture of a f**d, but it would be cool if someone would do something like this with a Chevy front end. Attached Images

02-13-2009, 05:57 PM	#9
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Pickup Truck Trailers I got one that I plan to paint to match my red '69 (wheels and all). I would love to camp in it at a board meet one day!! Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

02-13-2009, 06:06 PM	#12
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Pickup Truck Trailers ^^^^^ Neat

02-13-2009, 06:13 PM	#13
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: Pickup Truck Trailers I found a pic of a cool one Attached Images __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

02-13-2009, 06:18 PM	#16
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Pickup Truck Trailers ^^^ That is even cooler. Wait... that is photoshopped.. still neat.

02-13-2009, 06:31 PM	#19
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Pickup Truck Trailers LOW DOUGH! You just gave me a great idea! I have a 68 bent frame. A 72 LWB Box that is trashed to h3ll. I'll just make a trailer! You're a genius! Thanks! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

02-13-2009, 08:54 PM	#20
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: Pickup Truck Trailers I have made several like 67 C-30 posted and would recommed that you make one with leaf springs. The ones made out of the coil bounced and swayed too much.

02-13-2009, 10:50 PM	#21
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Pickup Truck Trailers Here is one that I made out of a 58 Chevy truck, tows great. Attached Images Last edited by extd56; 02-13-2009 at 10:51 PM.

02-14-2009, 07:48 AM	#23
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Pickup Truck Trailers I have one planned to go with my Stepside 4wd.I have a second bed and want to put it on a leaf spring frame so I can raise it to match the truck.The hitch will pivot.Gotta build the truck first,tho`. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

02-14-2009, 08:05 AM	#24
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,536	Re: Pickup Truck Trailers Those are some neat trailers there. Once I get my truck going maybe I can build one myself. I agree about the coil springs under the trailer. They might tend to bounce and sway a bit without the weight of the rest of the truck to hold it down. Could be stiff shocks or even a sway bar would keep it under control. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-14-2009, 08:32 AM	#25
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Pickup Truck Trailers My 50th anniversary trailer in the background................ Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 02-14-2009 at 08:41 AM.

Register or Log In To remove these advertisements.